[Serusers] SER X AS5300

[Welesley Sibelson Dias]

thks Steve but
i update my ios to IOS (tm) 5300 Software (C5300-IS-M), Version 12.3
(10),RELEASE SOFTWARE (fc3)
and enter :
tahoGWPSTNUDI(config)# voice class codec 2
tahoGWPSTNUDI(config-class)#  codec preference 1 g711ulaw
                                                 ^
% Invalid input detected at '^' marker.

tahoGWPSTNUDI(config-class)#  codec preference 2 g729r8 bytes 40
                                                 ^
% Invalid input detected at '^' marker.

tahoGWPSTNUDI(config-class)#  codec preference 3 g723r63 bytes 96
                                                 ^
% Invalid input detected at '^' marker.

tahoGWPSTNUDI(config-class)#  codec preference 4 g726r16 bytes 80
                                                 ^
% Invalid input detected at '^' marker.

tahoGWPSTNUDI(config-class)#  codec preference 5 gsmfr bytes 132
                                                 ^
% Invalid input detected at '^' marker.
but dont work please send me 
dir flash result:  


Em Seg 11 Abr 2005 19:59, você escreveu:
> 12.1 is pretty old from a Cisco SIP perspective. I'd encourage you
> to upgrade to a newer release, preferrably 12.3(x), and then try:
>
 voice class codec 2
  codec preference 1 g711ulaw
  codec preference 2 g729r8 bytes 40
  codec preference 3 g723r63 bytes 96
  codec preference 4 g726r16 bytes 80
  codec preference 5 gsmfr bytes 132
>
>  You can list which ever codecs are most important for your application.
> This is just an example.
>
> -Steve
>
> Welesley Sibelson Dias wrote:
> >I have one AS5300 with :
> >Cisco Internetwork Operating System Software
> >IOS (tm) 5300 Software (C5300-JS-M), Version 12.1(1)T,  RELEASE SOFTWARE
> > (fc1) Copyright (c) 1986-2000 by cisco Systems, Inc.
> >Compiled Sun 19-Mar-00 01:19 by ccai
> >Image text-base: 0x600088F8, data-base: 0x61150000
> >
> >ROM: System Bootstrap, Version 11.2(9)XA, RELEASE SOFTWARE (fc2)
> >BOOTFLASH: 5300 Software (C5300-BOOT-M), Version 12.0(4)T1,  RELEASE
> > SOFTWARE ()
> >
> >tahoGWPSTNUDI uptime is 3 minutes
> >System returned to ROM by reload at 00:06:02 UTC Sat Jan 1 2000
> >System image file is "flash:c5300-js-mz.121-1.T"
> >
> >cisco AS5300 (R4K) processor (revision A.32) with 65536K/16384K bytes of
> >memory.
> >Processor board ID 10080984
> >R4700 CPU at 150Mhz, Implementation 33, Rev 1.0, 512KB L2 Cache
> >Channelized E1, Version 1.0.
> >Bridging software.
> >X.25 software, Version 3.0.0.
> >SuperLAT software (copyright 1990 by Meridian Technology Corp).
> >TN3270 Emulation software.
> >Primary Rate ISDN software, Version 1.1Backplane revision 2
> >Manufacture Cookie Info:
> > EEPROM Type 0x0001, EEPROM Version 0x01, Board ID 0x30,
> > Board Hardware Version 3.2, Item Number 73-2414-6,
> > Board Revision C0, Serial Number 10080984,
> > PLD/ISP Version 255.255, Manufacture Date 14-Oct-1998.
> >1 Ethernet/IEEE 802.3 interface(s)
> >1 FastEthernet/IEEE 802.3 interface(s)
> >35 Serial network interface(s)
> >240 terminal line(s)
> >8 Channelized E1/PRI port(s)
> >128K bytes of non-volatile configuration memory.
> >16384K bytes of processor board System flash (Read/Write)
> >8192K bytes of processor board Boot flash (Read/Write)
> >
> >Directory of flash:/
> >
> >  1  -rw-     9358184              <no date>  c5300-js-mz.121-1.T
> >  2  -rw-      465798              <no date>  pw.2711.ios
> >
> >
> >but i can't  configure codecs
> >i enter into voice-class e
> >enter preference codec but don't accept
> >somebody know with more need me .
> >
> >
> >thks a lot
> >Welesley Sibelson Dias
> >
> >_______________________________________________
> >Serusers mailing list
> >serusers at lists.iptel.org
> >http://lists.iptel.org/mailman/listinfo/serusers