[Serusers] SER X AS5300

[Steve Blair]

12.1 is pretty old from a Cisco SIP perspective. I'd encourage you
to upgrade to a newer release, preferrably 12.3(x), and then try:

voice class codec 2
 codec preference 1 g711ulaw
 codec preference 2 g729r8 bytes 40
 codec preference 3 g723r63 bytes 96
 codec preference 4 g726r16 bytes 80
 codec preference 5 gsmfr bytes 132

 You can list which ever codecs are most important for your application.
This is just an example.

-Steve

Welesley Sibelson Dias wrote:

>I have one AS5300 with :
>Cisco Internetwork Operating System Software
>IOS (tm) 5300 Software (C5300-JS-M), Version 12.1(1)T,  RELEASE SOFTWARE (fc1)
>Copyright (c) 1986-2000 by cisco Systems, Inc.
>Compiled Sun 19-Mar-00 01:19 by ccai
>Image text-base: 0x600088F8, data-base: 0x61150000
>
>ROM: System Bootstrap, Version 11.2(9)XA, RELEASE SOFTWARE (fc2)
>BOOTFLASH: 5300 Software (C5300-BOOT-M), Version 12.0(4)T1,  RELEASE SOFTWARE 
>()
>
>tahoGWPSTNUDI uptime is 3 minutes
>System returned to ROM by reload at 00:06:02 UTC Sat Jan 1 2000
>System image file is "flash:c5300-js-mz.121-1.T"
>
>cisco AS5300 (R4K) processor (revision A.32) with 65536K/16384K bytes of 
>memory.
>Processor board ID 10080984
>R4700 CPU at 150Mhz, Implementation 33, Rev 1.0, 512KB L2 Cache
>Channelized E1, Version 1.0.
>Bridging software.
>X.25 software, Version 3.0.0.
>SuperLAT software (copyright 1990 by Meridian Technology Corp).
>TN3270 Emulation software.
>Primary Rate ISDN software, Version 1.1Backplane revision 2
>Manufacture Cookie Info:
> EEPROM Type 0x0001, EEPROM Version 0x01, Board ID 0x30,
> Board Hardware Version 3.2, Item Number 73-2414-6,
> Board Revision C0, Serial Number 10080984,
> PLD/ISP Version 255.255, Manufacture Date 14-Oct-1998.
>1 Ethernet/IEEE 802.3 interface(s)
>1 FastEthernet/IEEE 802.3 interface(s)
>35 Serial network interface(s)
>240 terminal line(s)
>8 Channelized E1/PRI port(s)
>128K bytes of non-volatile configuration memory.
>16384K bytes of processor board System flash (Read/Write)
>8192K bytes of processor board Boot flash (Read/Write)
>
>Directory of flash:/
>
>  1  -rw-     9358184              <no date>  c5300-js-mz.121-1.T
>  2  -rw-      465798              <no date>  pw.2711.ios
>
>
>but i can't  configure codecs
>i enter into voice-class e  
>enter preference codec but don't accept 
>somebody know with more need me .
>
>
>thks a lot
>Welesley Sibelson Dias
>
>_______________________________________________
>Serusers mailing list
>serusers at lists.iptel.org
>http://lists.iptel.org/mailman/listinfo/serusers
>  
>