[Serusers] What's the problem of SER with Mysql

ljzhang xueyou38 at 163.com
Fri Apr 1 14:18:39 CEST 2005


Hi,

I configure SER with Mysql. After I start SER, it don't show "successful" word, and can't end. No UA can register to SER. I found when UA sends Register message, it can't receive any response. But I use serctl command to monitor SER, I can't find any error.  After I restart Linux again, Linux'start process is blocked when it is starting ser. My Linux op can't be started. That's horrible. 

Furthermore, After I configure SER with Mysql, I configure SER without Mysql again, SER also can't start nomally. The only way is to remove it and restall it.

Can you help me!! Thanks.

My ser.cfg is as following:
#
# $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $
#
# simple quick-start config script
#

# ----------- global configuration parameters ------------------------

#debug=3         # debug level (cmd line: -dddddddddd)
#fork=yes
#log_stderror=no	# (cmd line: -E)

# Uncomment these lines to enter debugging mode 
debug=7
fork=no
log_stderror=yes


check_via=no	# (cmd. line: -v)
dns=no           # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
#port=5060
#children=4
fifo="/tmp/ser_fifo"

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database
loadmodule "/usr/lib/ser/modules/mysql.so"

loadmodule "/usr/lib/ser/modules/sl.so"
loadmodule "/usr/lib/ser/modules/tm.so"
loadmodule "/usr/lib/ser/modules/rr.so"
loadmodule "/usr/lib/ser/modules/maxfwd.so"
loadmodule "/usr/lib/ser/modules/usrloc.so"
loadmodule "/usr/lib/ser/modules/registrar.so"

# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "/usr/lib/ser/modules/auth.so"
loadmodule "/usr/lib/ser/modules/auth_db.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --

#modparam("usrloc", "db_mode",   0)

# Uncomment this if you want to use SQL database 
# for persistent storage and comment the previous line
modparam("usrloc", "db_mode", 2)

# -- auth params --
# Uncomment if you are using auth module
#
modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config), 
# uncomment also the following parameter)
#
modparam("auth_db", "password_column", "password")

# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)

# -------------------------  request routing logic -------------------

# main routing logic

route{

	# initial sanity checks -- messages with
	# max_forwards==0, or excessively long requests
	#if (!mf_process_maxfwd_header("10")) {
	#	sl_send_reply("483","Too Many Hops");
	#	break;
	#};
	if ( msg:len > max_len ) {
		sl_send_reply("513", "Message too big");
		break;
	};

	# we record-route all messages -- to make sure that
	# subsequent messages will go through our proxy; that's
	# particularly good if upstream and downstream entities
	# use different transport protocol
	record_route();	
	# loose-route processing
	if (loose_route()) {
		t_relay();
		break;
	};

	# if the request is for other domain use UsrLoc
	# (in case, it does not work, use the following command
	# with proper names and addresses in it)
	if (uri=~"127.0.0.1") {

		if (method=="REGISTER") {

# Uncomment this if you want to use digest authentication
		#	if (!www_authorize("127.0.0.1", "subscriber")) {
		#		www_challenge("127.0.0.1", "0");
		#		break;
		#	};

			save("location");
			break;
		};

		# native SIP destinations are handled using our USRLOC DB
		if (!lookup("location")) {
			sl_send_reply("404", "Not Found");
			break;
		};
	};
	# forward to current uri now; use stateful forwarding; that
	# works reliably even if we forward from TCP to UDP
	if (!t_relay()) {
		sl_reply_error();
	};

}




 				

        jenny
        xueyou38 at 163.com
          2005-04-01


More information about the sr-users mailing list