[Serusers] SerWeb authentication fails, my confusion over domain/realm referenced in archives

[steve]

Hi,
For the php id for admin user I have cf36d1931ae84e1a1c22bb5a44f8fb8a 

The ser version is 0.8.12 (i386/linux)

The serweb version serweb_2004-01-04  (that was the name of the tar)

I think these are the latest stable releases, do you know if they are
compatible?

Many thanks for the response...



> -----Original Message-----
> From: Daniel-Constantin Mierla [mailto:daniel at iptel.org] 
> Sent: Friday 07 May 2004 09:38
> To: steve
> Cc: serusers at lists.iptel.org
> Subject: Re: [Serusers] SerWeb authentication fails, my 
> confusion over domain/realm referenced in archives
> 
> Hello,
> please check if you have a value for phplib_id in subscriber table. 
> Also, what version of ser and serweb do you have? There might 
> be some incompatibilities.
> 
> Daniel
> 
> On 5/7/2004 9:23 AM, steve wrote:
> 
> >Hi,
> >Still trying to narrow down this issue of the authentication failure.
> >
> >I have taken everything back to the start.
> >
> >So the uname of the box is labbox-b.noclan.lab, I have set the 
> >sip_domain to be labbox-b.noclan.lab, all the ser.cfg is set 
> to labbox-b.noclan.lab.
> >
> >In the config.php I have set the line for the domain to:
> >
> >this->realm=labbox-b.noclan.lab$this->domainname=labbox-b.noc
> lan.lab$th
> >this->is->d
> >efault_domain=
> >
> >I don't know if I need to use default domain as the box is called 
> >labbox-b.noclan.lab.
> >
> >Apache is back to running without virtual hosts.
> >
> >I connect to serweb on 
> http://labbox-b.noclan.lab/admin/index.php where 
> >I type in the user name and password, and get returned to 
> the login screen.
> >
> >Is the only interaction here between Apache/PHP/MySQL and the 
> >SIP_DOMAIN or is the ser.cfg file referenced from this login routine?
> >
> >Any help greatly appreciated...
> >
> >  
> >
> >>>Since you are using SIP-PROXY.LAB as your SER domain, you
> >>>      
> >>>
> >>should set
> >>    
> >>
> >>>the line to:
> >>>
> >>>      
> >>>
> >>$this->realm=$this->domainname=$this->default_domain="SIP-PR
> OXY.LAB";
> >>    
> >>
> >>>The other way is configure your apache to virtual host 
> >>>www.SIP-PROXY.LAB and you do not need to do anything on serweb.
> >>>
> >>>Zeus
> >>> 
> >>>      
> >>>
> >
> >  
> >
> >>-----Original Message-----
> >>From: serusers-bounces at lists.iptel.org
> >>[mailto:serusers-bounces at lists.iptel.org] On Behalf Of steve
> >>Sent: Thursday 06 May 2004 13:24
> >>To: 'Zeus Ng'
> >>Cc: serusers at lists.iptel.org
> >>Subject: RE: [Serusers] SerWeb authentication fails,my 
> confusion over 
> >>domain/realm referenced in archives
> >>
> >>Thanks, I will try that and then report back. 
> >>
> >>    
> >>
> >>>-----Original Message-----
> >>>From: Zeus Ng [mailto:zeus.ng at isquare.com.au]
> >>>Sent: Thursday 06 May 2004 13:11
> >>>To: 'steve'
> >>>Cc: serusers at lists.iptel.org
> >>>Subject: RE: [Serusers] SerWeb authentication fails,my
> >>>      
> >>>
> >>confusion over
> >>    
> >>
> >>>domain/realm referenced in archives
> >>>
> >>>See answer below.
> >>>
> >>>      
> >>>
> >>>>-----Original Message-----
> >>>>From: serusers-bounces at lists.iptel.org
> >>>>[mailto:serusers-bounces at lists.iptel.org] On Behalf Of steve
> >>>>Sent: Thursday, 6 May 2004 6:34 PM
> >>>>To: serusers at lists.iptel.org
> >>>>Subject: [Serusers] SerWeb authentication fails,my confusion over 
> >>>>domain/realm referenced in archives
> >>>>
> >>>>
> >>>>Hi,
> >>>>I have got Serweb going but when I access admin/index.php or 
> >>>>user_interface/index.php I get the login prompt but when I try to 
> >>>>login it returns to the login prompt.
> >>>>
> >>>>Looking back at the archives I see references to the domain
> >>>>        
> >>>>
> >>>or realm
> >>>      
> >>>
> >>>>being incorrect, what realm / domain does this refer to? 
> >>>>        
> >>>>
> >>>What needs to
> >>>      
> >>>
> >>>>match this domain.
> >>>>
> >>>>When I set up the MySQL users I had used the command export 
> >>>>SIP_DOMAIN="SIP-PROXY.LAB" to allow me to use serctl, I
> >>>>        
> >>>>
> >>see this in
> >>    
> >>
> >>>>the output from select * from subscriber; run in mysql.
> >>>>
> >>>>I have changed the line in the html/config.php to match how I had 
> >>>>configured my ser.cfg: (in the ser howto these commands were on 
> >>>>separate lines, in my config.php they were on one line, does this
> >>>>matter?)
> >>>>
> >>>>/* your domain name */
> >>>> 
> >>>>$this->realm="boxb.lab"$this->domainname="boxb.lab"$this->defa
> >>>>ult_domain=
> >>>>                        ereg_replace(
> >>>>        
> >>>>
> >>"(www\.|sip\.)?(.*)", "\\2",
> >>    
> >>
> >>>>$_SERVER['SERVER_NAME']);
> >>>>                /* initial nummerical alias for new
> >>>>        
> >>>>
> >>>By default, serweb expects your web server name, which is your 
> >>>hostname for default apache installation, minus the www or
> >>>      
> >>>
> >>sip part as
> >>    
> >>
> >>>your default_domain.
> >>>
> >>>So, if your hostname is boxb.lab, the parameters in the above line 
> >>>will resolve to boxb.lab.
> >>>
> >>>Since you are using SIP-PROXY.LAB as your SER domain, you
> >>>      
> >>>
> >>should set
> >>    
> >>
> >>>the line to:
> >>>
> >>>      
> >>>
> >>$this->realm=$this->domainname=$this->default_domain="SIP-PR
> OXY.LAB";
> >>    
> >>
> >>>The other way is configure your apache to virtual host 
> >>>www.SIP-PROXY.LAB and you do not need to do anything on serweb.
> >>>
> >>>Zeus
> >>>
> >>>      
> >>>
> >
> >
> >_______________________________________________
> >Serusers mailing list
> >serusers at lists.iptel.org
> >http://lists.iptel.org/mailman/listinfo/serusers
> >
> >  
> >
> 
> ______________________________________________________________
> __________
> This message has been checked for all known viruses by the 
> CitC Virus Scanning Service powered by SkyLabs. For further 
> information visit http://www.citc.it
> 
> ___
>