[Serusers] error loading acc module
Roman Mikus
roman at zutom.sk
Wed Mar 17 14:49:58 CET 2004
sorry I don't understand what are you pointing me to...
>From that document I figured out, that function t_relay_to not longer
exist in tm module. But I have problems with function t_relay_to_tcp.
That function should be in tm. Is it correct?
Why than I'm getting error message "tm_bind: TM module function
't_relay_to_tcp' not found"??
When I comment out line loadmodule "/usr/local/lib/ser/modules/acc.so"
in my config, ser starts without complaining. I think that acc module is
using t_relay_to_tcp, but from some reason it isn't found in tm.
Thanks.
Roman Mikus
> -----Original Message-----
> From: Jiri Kuthan [mailto:jiri at iptel.org]
> Sent: Wednesday, March 17, 2004 2:22 PM
> To: Roman Mikus; serusers at lists.iptel.org
> Subject: Re: [Serusers] error loading acc module
>
> see http://lists.iptel.org/pipermail/serusers/2004-March/006655.html
>
> -jiri
>
> At 10:02 AM 3/17/2004, Roman Mikus wrote:
>
> >Hi,
> >
> >I'm running ser-0.8.12 on FreeBSD 4.9-RELEASE-p1. It was installed
from
> ports collection. Simple configuration works fine, until I try to load
acc
> module. Then I get following error message and ser server doesn't
start.
> >
> >
> >Mar 16 12:54:33 sirena /usr/local/sbin/ser[75391]: ERROR: tm_bind: TM
> module function 't_relay_to_tcp' not found
> >Mar 16 12:54:33 sirena /usr/local/sbin/ser[75391]: init_mod(): Error
> while initializing module acc
> >
> >My ser config file is atached on the end.
> >
> >Can anybody help me with this? Thanks a lot.
> >
> >Roman Mikus
> >mail to: roman at zutom.sk
> >
> >#
> ># $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $
> >#
> ># simple quick-start config script
> >#
> >
> ># ----------- global configuration parameters
------------------------
> >
> >#debug=3 # debug level (cmd line: -dddddddddd)
> >#fork=yes
> >#log_stderror=no # (cmd line: -E)
> >
> >/* Uncomment these lines to enter debugging mode
> >debug=7
> >fork=no
> >log_stderror=yes
> >*/
> >
> >check_via=no # (cmd. line: -v)
> >dns=no # (cmd. line: -r)
> >rev_dns=no # (cmd. line: -R)
> >#port=5060
> >#children=4
> >fifo="/tmp/ser_fifo"
> >
> ># ------------------ module loading
----------------------------------
> >
> ># Uncomment this if you want to use SQL database
> >loadmodule "/usr/local/lib/ser/modules/mysql.so"
> >
> >loadmodule "/usr/local/lib/ser/modules/tm.so"
> >loadmodule "/usr/local/lib/ser/modules/acc.so"
> >loadmodule "/usr/local/lib/ser/modules/sl.so"
> >loadmodule "/usr/local/lib/ser/modules/rr.so"
> >loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
> >loadmodule "/usr/local/lib/ser/modules/usrloc.so"
> >loadmodule "/usr/local/lib/ser/modules/registrar.so"
> >
> ># Uncomment this if you want digest authentication
> ># mysql.so must be loaded !
> >loadmodule "/usr/local/lib/ser/modules/auth.so"
> >loadmodule "/usr/local/lib/ser/modules/auth_db.so"
> >
> ># ----------------- setting module-specific parameters
---------------
> >
> ># -- usrloc params --
> >
> >#modparam("usrloc", "db_mode", 0)
> >
> ># Uncomment this if you want to use SQL database
> ># for persistent storage and comment the previous line
> >modparam("usrloc", "db_mode", 2)
> >
> ># -- auth params --
> ># Uncomment if you are using auth module
> >#
> >modparam("auth_db", "calculate_ha1", yes)
> >#
> ># If you set "calculate_ha1" parameter to yes (which true in this
> config),
> ># uncomment also the following parameter)
> >#
> >modparam("auth_db", "password_column", "password")
> >
> ># -- rr params --
> ># add value to ;lr param to make some broken UAs happy
> >modparam("rr", "enable_full_lr", 1)
> >
> >modparam("auth_db", "db_url", "sql://serro:heslo@localhost/ser")
> >modparam("usrloc", "db_url", "sql://ser:heslo@localhost/ser")
> >
> ># accounting
> >#modparam("acc", "log_level", 1)
> >#modparam("acc", "log_flag", 1 )
> >
> >
> ># ------------------------- request routing logic
-------------------
> >
> ># main routing logic
> >
> >route{
> >
> > # initial sanity checks -- messages with
> > # max_forwards==0, or excessively long requests
> > if (!mf_process_maxfwd_header("10")) {
> > sl_send_reply("483","Too Many Hops");
> > break;
> > };
> > if ( msg:len > max_len ) {
> > sl_send_reply("513", "Message too big");
> > break;
> > };
> >
> > # we record-route all messages -- to make sure that
> > # subsequent messages will go through our proxy; that's
> > # particularly good if upstream and downstream entities
> > # use different transport protocol
> > record_route();
> > # loose-route processing
> > if (loose_route()) {
> > t_relay();
> > break;
> > };
> >
> >
> > ############# kvoli accountingu
> > # labeled all transaction for accounting
> > #setflag(1);
> > # record-route INVITES to make sure BYEs will visit our
server
> too
> > #if (method=="INVITE") record_route();
> > #####################################
> >
> > # if the request is for other domain use UsrLoc
> > # (in case, it does not work, use the following command
> > # with proper names and addresses in it)
> > ##if (uri==myself) {
> > if (uri=~"zutom.sk") {
> >
> > if (method=="REGISTER") {
> >
> > # Uncomment this if you want to use digest authentication
> > if (!www_authorize("zutom.sk", "subscriber"))
{
> > www_challenge("zutom.sk", "0");
> > break;
> > };
> >
> > save("location");
> > lookup("aliases");
> > break;
> > };
> >
> > # native SIP destinations are handled using our
USRLOC DB
> > if (!lookup("location")) {
> > sl_send_reply("404", "Not Found");
> > break;
> > };
> > };
> > # forward to current uri now; use stateful forwarding; that
> > # works reliably even if we forward from TCP to UDP
> > if (!t_relay()) {
> > sl_reply_error();
> > };
> >
> >}
> >
> >_______________________________________________
> >Serusers mailing list
> >serusers at lists.iptel.org
> >http://lists.iptel.org/mailman/listinfo/serusers
>
> --
> Jiri Kuthan http://iptel.org/~jiri/
More information about the sr-users
mailing list