[Serusers] SER & Radius

[Jan Janak]

ser tells you exactly on what line the problem is, see the logs, without
this information it is hard to find out what exactly the problem is.

 Jan.

On 10-03 15:26, Anton wrote:
> Hello Guru,
> 
> I try SER with FreeRadius, but I alway get the error when start SER 
> "ERROR: dab config file (10 errors)"
> 
> I've include my ser.cfg for your reference.
> Any info, help is hightly appreciated.
> 
> Thank you & regards,
> Anton
> 
> ser.cfg:
> 
> #
> # $Id: ser.cfg,v 1.21 2003/06/04 13:47:36 jiri Exp $
> #
> # simple quick-start config script
> #
> # ----------- global configuration parameters ------------------------
> debug=3 # debug level (cmd line: -dddddddddd)
> fork=yes
> log_stderror=no # (cmd line: -E)
> /* Uncomment these lines to enter debugging mode 
> debug=7
> fork=no
> log_stderror=yes
> */
> check_via=no # (cmd. line: -v)
> dns=no # (cmd. line: -r)
> rev_dns=no # (cmd. line: -R)
> port=5060
> children=4
> fifo="/tmp/ser_fifo"
> # ------------------ module loading ----------------------------------
> # Uncomment this if you want to use SQL database
> #loadmodule "/usr/local/lib/ser/modules/mysql.so"
> loadmodule "/usr/local/lib/ser/modules/sl.so"
> loadmodule "/usr/local/lib/ser/modules/tm.so"
> loadmodule "/usr/local/lib/ser/modules/rr.so"
> loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
> loadmodule "/usr/local/lib/ser/modules/usrloc.so"
> loadmodule "/usr/local/lib/ser/modules/registrar.so"
> # Uncomment this if you want digest authentication
> # mysql.so must be loaded !
> #loadmodule "/usr/local/lib/ser/modules/auth.so"
> #loadmodule "/usr/local/lib/ser/modules/auth_db.so"
> loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
> # ----------------- setting module-specific parameters ---------------
> # -- usrloc params --
> modparam("usrloc", "db_mode", 0)
> # Uncomment this if you want to use SQL database 
> # for persistent storage and comment the previous line
> #modparam("usrloc", "db_mode", 2)
> # -- auth params --
> # Uncomment if you are using auth module
> #
> #modparam("auth_db", "calculate_ha1", yes)
> #
> # If you set "calculate_ha1" parameter to yes (which true in this config), 
> # uncomment also the following parameter)
> #
> #modparam("auth_db", "password_column", "password")
> # -- rr params --
> # add value to ;lr param to make some broken UAs happy
> modparam("rr", "enable_full_lr", 1)
> modparam("auth_radius", "radius_config", "/usr/local/etc/radiusclient/radiusclient.conf")
> modparam("auth_radius", "service_type", 15)
> # ------------------------- request routing logic -------------------
> # main routing logic
> route{
> # initial sanity checks -- messages with
> # max_forwards==0, or excessively long requests
>     if (!mf_process_maxfwd_header("10")) {
>         sl_send_reply("483","Too Many Hops");
>         break;
>     };
> 
>     if (len_gt( max_len )) {
>         sl_send_reply("513", "Message too big");
>         break;
>     };
> 
> # we record-route all messages -- to make sure that
> # subsequent messages will go through our proxy; that's
> # particularly good if upstream and downstream entities
> # use different transport protocol
>     record_route(); 
>  # loose-route processing
> 
>     if (loose_route()) {
>         t_relay();
>         break;
>     };
> 
> # if the request is for other domain use UsrLoc
> # (in case, it does not work, use the following comman
> # with proper names and addresses in it)
> 
>     if (uri==myself) {
>         if (method=="REGISTER") {
> # Uncomment this if you want to use digest authentication
>             if (!radius_www_authorize("") {
>                 www_challenge("", "0");
>                 break;
>             };
>             save("location");
>             break;
>         };
> 
> # native SIP destinations are handled using our USRLOC DB
> 
>     if (!lookup("location")) {
>         sl_send_reply("404", "Not Found");
>         break;
>     };
> };
> 
> # forward to current uri now; use stateful forwarding; that
> # works reliably even if we forward from TCP to UDP
> 
>     if (!t_relay()) {
>         sl_reply_error();
>     };
> 
> }
> 
> 
> 
> 

> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers