[Serusers] SER & Radius

[Anton]

Hello Guru,

I try SER with FreeRadius, but I alway get the error when start SER 
"ERROR: dab config file (10 errors)"

I've include my ser.cfg for your reference.
Any info, help is hightly appreciated.

Thank you & regards,
Anton

ser.cfg:

#
# $Id: ser.cfg,v 1.21 2003/06/04 13:47:36 jiri Exp $
#
# simple quick-start config script
#
# ----------- global configuration parameters ------------------------
debug=3 # debug level (cmd line: -dddddddddd)
fork=yes
log_stderror=no # (cmd line: -E)
/* Uncomment these lines to enter debugging mode 
debug=7
fork=no
log_stderror=yes
*/
check_via=no # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/ser_fifo"
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database
#loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
# Uncomment this if you want digest authentication
# mysql.so must be loaded !
#loadmodule "/usr/local/lib/ser/modules/auth.so"
#loadmodule "/usr/local/lib/ser/modules/auth_db.so"
loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database 
# for persistent storage and comment the previous line
#modparam("usrloc", "db_mode", 2)
# -- auth params --
# Uncomment if you are using auth module
#
#modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config), 
# uncomment also the following parameter)
#
#modparam("auth_db", "password_column", "password")
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
modparam("auth_radius", "radius_config", "/usr/local/etc/radiusclient/radiusclient.conf")
modparam("auth_radius", "service_type", 15)
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
    if (!mf_process_maxfwd_header("10")) {
        sl_send_reply("483","Too Many Hops");
        break;
    };

    if (len_gt( max_len )) {
        sl_send_reply("513", "Message too big");
        break;
    };

# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy; that's
# particularly good if upstream and downstream entities
# use different transport protocol
    record_route(); 
 # loose-route processing

    if (loose_route()) {
        t_relay();
        break;
    };

# if the request is for other domain use UsrLoc
# (in case, it does not work, use the following comman
# with proper names and addresses in it)

    if (uri==myself) {
        if (method=="REGISTER") {
# Uncomment this if you want to use digest authentication
            if (!radius_www_authorize("") {
                www_challenge("", "0");
                break;
            };
            save("location");
            break;
        };

# native SIP destinations are handled using our USRLOC DB

    if (!lookup("location")) {
        sl_send_reply("404", "Not Found");
        break;
    };
};

# forward to current uri now; use stateful forwarding; that
# works reliably even if we forward from TCP to UDP

    if (!t_relay()) {
        sl_reply_error();
    };

}




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20040310/01042865/attachment.htm>