[Serusers] No Audio

[Shirley]

Hi, 

Thank you for the reply.

Do you use before using UA behind Symmetric NAT to make to the other UA
behind Symmetric NAT? As I am doing this, but there is no audio. I have
attached the ser.cfg. Please kindly advise have been a long problem
already.Thank u!! 

 <<ser.cfg>> 
Regards, 
Shirley

> -----Original Message-----
> From:	Patrick Muldoon [SMTP:doon at inoc.net]
> Sent:	Saturday, March 06, 2004 11:42 AM
> To:	serusers at lists.iptel.org
> Subject:	Re: [Serusers] No Audio
> 
> On Friday 05 March 2004 10:24 pm, Shirley wrote:
> > Hi ,
> >
> > I am using UA1 to UA2. Looking at the Ethereal I have this Broadcast
> > message and there is no audio transmitted.
> > <"Protocol: ARP , who has 192.168.0.177? Tell 192.168.0.142 > Do anyone
> > have this before? Please help?
> >
> > regards,
> > shirley
> 
> arp = Address Resolution Protocol.  It is how hosts on the same layer 2 
> network find each other.   So basically 192.168.0.177 is looking for the
> MAC 
> address of 192.168.0.142.  This is normal. 
> 
> -:Patrick 
> 
> -- 
> Patrick Muldoon
> Network/Software Engineer
> INOC (http://www.inoc.net)
> PGPKEY (http://www.inoc.net/~doon)
> Key ID: 0x370D752C
> 
> Beware of programmers who carry screwdrivers.  - Leonard Brandwein
> 
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ser.cfg
Type: application/octet-stream
Size: 6692 bytes
Desc: not available
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20040306/fed49797/attachment.obj>