[Serusers] Problem using PSTN.

[gc]

Yes, I do have this. It is still not working. Anything else you can think of
that may cause PSTN problem? How about hosts file on this machine? How can I
debug this? I looked at /var/log/messes, it did not help me.

Gary
----- Original Message ----- 
From: "Jan Janak" <jan at iptel.org>
To: "gc" <garych at unidial.com>
Cc: <serusers at lists.iptel.org>
Sent: Tuesday, June 08, 2004 12:02 PM
Subject: Re: [Serusers] Problem using PSTN.


> OK, to clarify it a bit, it should be something like this:
>
> if (uri =~ "^sip:1[0-9]+ at .*") {
> record_route();
> rewritehostport("GW:PORT");
> if (!t_relay()) {
> sl_reply_error();
> break;
> };
> };
>
>   Jan.
>
> On 08-06 10:48, gc wrote:
> > Sorry for the misspell. I did have "^SIP:" in there. I tried forward(),
> > t_relay_to_udp() , t_relay_to(). None of them work. I also used ngrep to
> > display the sip messages. it seems the message never get forward to PSTN
> > gateway. Although I can directly connect to PSTN gateway with my sip
phone
> > and make phone call. How can I debug this thing?
> >
> > gary
> > ----- Original Message ----- 
> > From: "Jan Janak" <jan at iptel.org>
> > To: "gc" <garych at unidial.com>
> > Cc: <serusers at lists.iptel.org>
> > Sent: Tuesday, June 08, 2004 5:42 AM
> > Subject: Re: [Serusers] Problem using PSTN.
> >
> >
> > > The reqular expression is not correct, it should be something like
this:
> > >
> > > if (uri =~ "^sip:1.*")
> > >
> > >   Jan.
> > >
> > > On 07-06 09:15, gc wrote:
> > > > I am having problem using PSTN(AS5300). I have a VOCAL setup on the
same
> > machine and PSTN works fine with VOCAL. Now I want to test SER on the
same
> > machine. I shut down VOCAL and start SER. I can make SIP to SIP calls
but
> > can not make SIP to PSTN call. In my ser.cfg, I redirect all the calls
> > starting with 1 to the PSTN like this:
> > > > if (uri=~"^1.*"){
> > > > log(1,"Forwarding to PSTN\n");
> > > > record_reoute();
> > > > rewritehostport("PSTN IP:PORT");
> > > > };
> > > >
> > > > Do I need any specific module for PSTN to work? How can I debug
this?
> > > >
> > > > Gary
> > > >
> > >
> > > > _______________________________________________
> > > > Serusers mailing list
> > > > serusers at lists.iptel.org
> > > > http://lists.iptel.org/mailman/listinfo/serusers
> > >
> > >
> >