[Serusers] (no subject)

Tue Jun 1 13:20:24 CEST 2004

Are you sure that mysql is running? Are the tables correctly installed? Are
you using the correct mysql.so? Does ser -dddd -c tell you anything? What
does the var/log/messages file tell you? Maybe this helps, Tjapko.

-----Original Message-----
From: serusers-bounces at iptel.org [mailto:serusers-bounces at lists.iptel.org]On
Behalf Of Jiang zhou
Sent: Martes, 01 de Junio de 2004 03:52 a.m.
To: Kapil Dhawan; serusers at lists.iptel.org
Subject: Re: Re: RE: [Serusers] (no subject)

Hi,Kapil Dhawan

#
# $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $
#
# simple quick-start config script
#

# ----------- global configuration parameters ------------------------

#debug=3         # debug level (cmd line: -dddddddddd)
#fork=yes
#log_stderror=no	# (cmd line: -E)

/* Uncomment these lines to enter debugging mode
debug=7
fork=no
log_stderror=yes
*/

check_via=no	# (cmd. line: -v)
dns=no           # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
#port=5060
#children=4
fifo="/tmp/ser_fifo"

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database
loadmodule "/usr/local/lib/ser/modules/mysql.so"

loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"

# Uncomment this if you want digest authentication
# mysql.so must be loaded !
#loadmodule "/usr/local/lib/ser/modules/auth.so"
#loadmodule "/usr/local/lib/ser/modules/auth_db.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --

modparam("usrloc", "db_mode",   0)

# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
#modparam("usrloc", "db_mode", 2)

# -- auth params --
# Uncomment if you are using auth module

#modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config),
# uncomment also the following parameter)
#
#modparam("auth_db", "password_column", "password")

# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)

# -------------------------  request routing logic -------------------

# main routing logic

route{

	# initial sanity checks -- messages with
	# max_forwards==0, or excessively long requests
	if (!mf_process_maxfwd_header("10")) {
		sl_send_reply("483","Too Many Hops");
		break;
	};
	if ( msg:len > max_len ) {
		sl_send_reply("513", "Message too big");
		break;
	};

	# we record-route all messages -- to make sure that
	# subsequent messages will go through our proxy; that's
	# particularly good if upstream and downstream entities
	# use different transport protocol
	record_route();
	# loose-route processing
	if (loose_route()) {
		t_relay();
		break;
	};

	# if the request is for other domain use UsrLoc
	# (in case, it does not work, use the following command
	# with proper names and addresses in it)
	if (uri==myself) {

		if (method=="REGISTER") {

# Uncomment this if you want to use digest authentication
#			if (!www_authorize("iptel.org", "subscriber")) {
#				www_challenge("iptel.org", "0");
#				break;
#			};

			save("location");
			break;
		};

		# native SIP destinations are handled using our USRLOC DB
		if (!lookup("location")) {
			sl_send_reply("404", "Not Found");
			break;
		};
	};
	# forward to current uri now; use stateful forwarding; that
	# works reliably even if we forward from TCP to UDP
	if (!t_relay()) {
		sl_reply_error();
	};

}

Best Regards
Jiang zhou
Email:zjiang at photonicbridges.com
2004-06-01

======= 2004-06-01 15:38:36 you have wrote：=======

>pls paste your ser.cfg file
>
>
>>From: "Jiang zhou" <zjiang at photonicbridges.com>
>>Reply-To: zjiang at photonicbridges.com
>>To: "Kapil Dhawan" <sersavvy at hotmail.com>
>>CC: "serusers at lists.iptel.org" <serusers at lists.iptel.org>
>>Subject: Re: RE: [Serusers] (no subject)
>>Date: Tue, 1 Jun 2004 14:20:15 +0800
>>
>>Hi,Kapil Dhawan
>>
>>Yes, I want to use database to store my users list. I modified the ser.cfg
>>to support mysql. But once I uncomment this loadmodule line, ser can't
>>startup with a bad config file.
>>
>>Best Regards
>>Jiang zhou
>>Email:zjiang at photonicbridges.com
>>2004-06-01
>>
>>======= 2004-06-01 14:11:00 you have wrote：=======
>>
>> >mysql.so is a database module. if you want to store users list etc in
>> >database then you have to use it...
>> >
>> >
>> >>From: "Jiang zhou" <zjiang at photonicbridges.com>
>> >>Reply-To: zjiang at photonicbridges.com
>> >>To: "serusers" <serusers at lists.iptel.org>
>> >>Subject: [Serusers] (no subject)
>> >>Date: Tue, 1 Jun 2004 14:09:36 +0800
>> >>
>> >>Hi,serusers-request
>> >>
>> >>In my ser.cfg there is a line as :
>> >>loadmodule "/usr/local/lib/ser/modules/mysql.so"
>> >>
>> >>When I start ser, it tell the follow error:
>> >>ERROR: bad config file (1 errors)
>> >>
>> >>I have the mysql.so in /usr/local/lib/ser/modules/
>> >>
>> >>If I comment it, ser can run.
>> >>
>> >>Can someone tell me why?
>> >>
>> >>Best Regards
>> >>Jiang zhou
>> >>2004-06-01
>> >>
>> >>
>> >>_______________________________________________
>> >>Serusers mailing list
>> >>serusers at lists.iptel.org
>> >>http://lists.iptel.org/mailman/listinfo/serusers
>> >
>> >_________________________________________________________________
>> >Get a Citibank Home Loan now. http://go.msnserver.com/IN/49351.asp Build
>> >with Citibank Home Loans.
>> >
>> >.
>>
>>= = = = = = = = = = = = = = = = = = = =
>>
>
>_________________________________________________________________
>Holiday? Wedding? Refurnishing?  http://go.msnserver.com/IN/49356.asp
>Fulfill all your dreams with Citibank Ready Cash!
>
>.

= = = = = = = = = = = = = = = = = = = =

---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.692 / Virus Database: 453 - Release Date: 28/05/2004

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.692 / Virus Database: 453 - Release Date: 28/05/2004