[Serusers] (no subject)
Kapil Dhawan
sersavvy at hotmail.com
Tue Jun 1 10:18:35 CEST 2004
Try this file
This will tell you the exact errors on console
#
# $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $
#
# simple quick-start config script
#
# ----------- global configuration parameters ------------------------
debug=7 # debug level (cmd line: -dddddddddd)
#fork=yes
log_stderror=yes # (cmd line: -E)
/* Uncomment these lines to enter debugging mode
debug=7
fork=no
log_stderror=yes
*/
check_via=no # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
#port=5060
#children=4
fifo="/tmp/ser_fifo"
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database
loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_db.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
#modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
modparam("usrloc", "db_mode", 2)
# -- auth params --
# Uncomment if you are using auth module
modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config),
# uncomment also the following parameter)
#
modparam("auth_db", "password_column", "password")
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
break;
};
if ( msg:len > max_len ) {
sl_send_reply("513", "Message too big");
break;
};
# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy; that's
# particularly good if upstream and downstream entities
# use different transport protocol
record_route();
# loose-route processing
if (loose_route()) {
t_relay();
break;
};
# if the request is for other domain use UsrLoc
# (in case, it does not work, use the following command
# with proper names and addresses in it)
if (uri==myself) {
if (method=="REGISTER") {
# Uncomment this if you want to use digest authentication
# if (!www_authorize("iptel.org", "subscriber")) {
# www_challenge("iptel.org", "0");
# break;
# };
save("location");
break;
};
# native SIP destinations are handled using our USRLOC DB
if (!lookup("location")) {
sl_send_reply("404", "Not Found");
break;
};
};
# forward to current uri now; use stateful forwarding; that
# works reliably even if we forward from TCP to UDP
if (!t_relay()) {
sl_reply_error();
};
}
>From: "Jiang zhou" <zjiang at photonicbridges.com>
>Reply-To: zjiang at photonicbridges.com
>To: "Kapil Dhawan" <sersavvy at hotmail.com>, "serusers at lists.iptel.org"
><serusers at lists.iptel.org>
>Subject: Re: Re: RE: [Serusers] (no subject)
>Date: Tue, 1 Jun 2004 15:51:56 +0800
>
>Hi,Kapil Dhawan
>
>#
># $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $
>#
># simple quick-start config script
>#
>
># ----------- global configuration parameters ------------------------
>
>#debug=3 # debug level (cmd line: -dddddddddd)
>#fork=yes
>#log_stderror=no # (cmd line: -E)
>
>/* Uncomment these lines to enter debugging mode
>debug=7
>fork=no
>log_stderror=yes
>*/
>
>check_via=no # (cmd. line: -v)
>dns=no # (cmd. line: -r)
>rev_dns=no # (cmd. line: -R)
>#port=5060
>#children=4
>fifo="/tmp/ser_fifo"
>
># ------------------ module loading ----------------------------------
>
># Uncomment this if you want to use SQL database
>loadmodule "/usr/local/lib/ser/modules/mysql.so"
>
>loadmodule "/usr/local/lib/ser/modules/sl.so"
>loadmodule "/usr/local/lib/ser/modules/tm.so"
>loadmodule "/usr/local/lib/ser/modules/rr.so"
>loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
>loadmodule "/usr/local/lib/ser/modules/usrloc.so"
>loadmodule "/usr/local/lib/ser/modules/registrar.so"
>
># Uncomment this if you want digest authentication
># mysql.so must be loaded !
>#loadmodule "/usr/local/lib/ser/modules/auth.so"
>#loadmodule "/usr/local/lib/ser/modules/auth_db.so"
>
># ----------------- setting module-specific parameters ---------------
>
># -- usrloc params --
>
>modparam("usrloc", "db_mode", 0)
>
># Uncomment this if you want to use SQL database
># for persistent storage and comment the previous line
>#modparam("usrloc", "db_mode", 2)
>
># -- auth params --
># Uncomment if you are using auth module
>
>#modparam("auth_db", "calculate_ha1", yes)
>#
># If you set "calculate_ha1" parameter to yes (which true in this config),
># uncomment also the following parameter)
>#
>#modparam("auth_db", "password_column", "password")
>
># -- rr params --
># add value to ;lr param to make some broken UAs happy
>modparam("rr", "enable_full_lr", 1)
>
># ------------------------- request routing logic -------------------
>
># main routing logic
>
>route{
>
> # initial sanity checks -- messages with
> # max_forwards==0, or excessively long requests
> if (!mf_process_maxfwd_header("10")) {
> sl_send_reply("483","Too Many Hops");
> break;
> };
> if ( msg:len > max_len ) {
> sl_send_reply("513", "Message too big");
> break;
> };
>
> # we record-route all messages -- to make sure that
> # subsequent messages will go through our proxy; that's
> # particularly good if upstream and downstream entities
> # use different transport protocol
> record_route();
> # loose-route processing
> if (loose_route()) {
> t_relay();
> break;
> };
>
> # if the request is for other domain use UsrLoc
> # (in case, it does not work, use the following command
> # with proper names and addresses in it)
> if (uri==myself) {
>
> if (method=="REGISTER") {
>
># Uncomment this if you want to use digest authentication
># if (!www_authorize("iptel.org", "subscriber")) {
># www_challenge("iptel.org", "0");
># break;
># };
>
> save("location");
> break;
> };
>
> # native SIP destinations are handled using our USRLOC DB
> if (!lookup("location")) {
> sl_send_reply("404", "Not Found");
> break;
> };
> };
> # forward to current uri now; use stateful forwarding; that
> # works reliably even if we forward from TCP to UDP
> if (!t_relay()) {
> sl_reply_error();
> };
>
>}
>
>
>
>Best Regards
>Jiang zhou
>Email:zjiang at photonicbridges.com
>2004-06-01
>
>======= 2004-06-01 15:38:36 you have wrote£º=======
>
> >pls paste your ser.cfg file
> >
> >
> >>From: "Jiang zhou" <zjiang at photonicbridges.com>
> >>Reply-To: zjiang at photonicbridges.com
> >>To: "Kapil Dhawan" <sersavvy at hotmail.com>
> >>CC: "serusers at lists.iptel.org" <serusers at lists.iptel.org>
> >>Subject: Re: RE: [Serusers] (no subject)
> >>Date: Tue, 1 Jun 2004 14:20:15 +0800
> >>
> >>Hi,Kapil Dhawan
> >>
> >>Yes, I want to use database to store my users list. I modified the
>ser.cfg
> >>to support mysql. But once I uncomment this loadmodule line, ser can't
> >>startup with a bad config file.
> >>
> >>Best Regards
> >>Jiang zhou
> >>Email:zjiang at photonicbridges.com
> >>2004-06-01
> >>
> >>======= 2004-06-01 14:11:00 you have wrote£º=======
> >>
> >> >mysql.so is a database module. if you want to store users list etc in
> >> >database then you have to use it...
> >> >
> >> >
> >> >>From: "Jiang zhou" <zjiang at photonicbridges.com>
> >> >>Reply-To: zjiang at photonicbridges.com
> >> >>To: "serusers" <serusers at lists.iptel.org>
> >> >>Subject: [Serusers] (no subject)
> >> >>Date: Tue, 1 Jun 2004 14:09:36 +0800
> >> >>
> >> >>Hi,serusers-request
> >> >>
> >> >>In my ser.cfg there is a line as :
> >> >>loadmodule "/usr/local/lib/ser/modules/mysql.so"
> >> >>
> >> >>When I start ser, it tell the follow error:
> >> >>ERROR: bad config file (1 errors)
> >> >>
> >> >>I have the mysql.so in /usr/local/lib/ser/modules/
> >> >>
> >> >>If I comment it, ser can run.
> >> >>
> >> >>Can someone tell me why?
> >> >>
> >> >>Best Regards
> >> >>Jiang zhou
> >> >>2004-06-01
> >> >>
> >> >>
> >> >>_______________________________________________
> >> >>Serusers mailing list
> >> >>serusers at lists.iptel.org
> >> >>http://lists.iptel.org/mailman/listinfo/serusers
> >> >
> >> >_________________________________________________________________
> >> >Get a Citibank Home Loan now. http://go.msnserver.com/IN/49351.asp
>Build
> >> >with Citibank Home Loans.
> >> >
> >> >.
> >>
> >>= = = = = = = = = = = = = = = = = = = =
> >>
> >
> >_________________________________________________________________
> >Holiday? Wedding? Refurnishing? http://go.msnserver.com/IN/49356.asp
> >Fulfill all your dreams with Citibank Ready Cash!
> >
> >.
>
>= = = = = = = = = = = = = = = = = = = =
>
_________________________________________________________________
Contact brides & grooms FREE! http://www.shaadi.com/ptnr.php?ptnr=hmltag
Only on www.shaadi.com. Register now!
More information about the sr-users
mailing list