[Serusers] cpl-c en sample script

[Arne Scheffer]

Hello all,

I am trying to setup cpl-c.

I am using latest cvs head. 

I have setup ser with cpl-c and this seems to run.

I now try to do some test with the cpl script but the cpl-c engine reports:

Jul 26 13:54:09 localhost ser: cpl: start script processing now
Jul 26 13:54:09 localhost ser: DEBUG:cpl-c:get_dest_user: tring to get user from new_uri
Jul 26 13:54:09 localhost ser: DEBUG:cpl-c:get_dest_user: tring to get user from R_uri
Jul 26 13:54:09 localhost ser: DEBUG:get_user_script: fetching script for user <200 at 212.x.x.x>
Jul 26 13:54:09 localhost ser: DEBUG:get_user_script: we got the script len=311
Jul 26 13:54:09 localhost ser: ERROR:build_cpl_interpreter: first node is not CPL!!
Jul 26 13:54:09 localhost ser: cpl: script processing has been finished

Is there a sample script that will do call forward on busy /no answer ?

I have tried different scripts from the draft-ietf-iptel-cpl-09.pdf but all give this errors.

tested with:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE cpl PUBLIC '-//IETF//DTD RFCxxxx CPL 1.0//EN' 'cpl.dtd'>
<cpl>
  <incoming>
    <location url="sip:200 at 212.x.x.x">
      <proxy timeout="10">
        <noanswer>
          <location url="sip:800 at 212.x.x.x" clear="yes" />
        </noanswer>
      </proxy>
    </location>
  </incoming>
</cpl>


any ideas are welcome ?

Arne



-----Original Message-----
From: serusers-bounces at iptel.org [mailto:serusers-bounces at lists.iptel.org]On
Behalf Of karunb at omnitechnology.net
Sent: maandag 26 juli 2004 7:30
To: Jan Janak
Cc: serusers at lists.iptel.org
Subject: Re: [Serusers] problems with ul show <username>


Hi Vandaal,
            I have problem working with the MYSQL DataBase,Here is my
ser.cfg file I was not able to get 407 message the
Authentication and it doesn't use the MYSQL Data base for
Authentication even if i give incorrect password i get 200 ok
so can you help me on this.

Regards,
Karun










#
# $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $
#
# simple quick-start config script
#

# ----------- global configuration parameters ------------------------

debug=3         # debug level (cmd line: -dddddddddd)
fork=yes
log_stderror=no # (cmd line: -E)

/* Uncomment these lines to enter debugging mode
#debug=7
#fork=no
#log_stderror=yes
*/

check_via=no    # (cmd. line: -v)
dns=no           # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/ser_fifo"

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database
loadmodule "/usr/lib/ser/modules/mysql.so"

loadmodule "/usr/lib/ser/modules/sl.so"
loadmodule "/usr/lib/ser/modules/tm.so"
loadmodule "/usr/lib/ser/modules/rr.so"
loadmodule "/usr/lib/ser/modules/maxfwd.so"
loadmodule "/usr/lib/ser/modules/usrloc.so"
loadmodule "/usr/lib/ser/modules/registrar.so"

# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "/usr/lib/ser/modules/auth.so"
loadmodule "/usr/lib/ser/modules/auth_db.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --
#modparam("usrloc", "db_mode",   0)

# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
modparam("usrloc", "db_mode", 2)

# -- auth params --
# Uncomment if you are using auth module
#
#modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config),
# uncomment also the following parameter)
#
#modparam("auth_db", "password_column", "password")

# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)

# -------------------------  request routing logic -------------------
# main routing logic

route{

        # initial sanity checks -- messages with
        # max_forwards==0, or excessively long requests
        if (!mf_process_maxfwd_header("10")) {
                sl_send_reply("483","Too Many Hops");
                break;
        };
        if ( msg:len > max_len ) {
                sl_send_reply("513", "Message too big");
                break;
        };

        # we record-route all messages -- to make sure that
        # subsequent messages will go through our proxy; that's
        # particularly good if upstream and downstream entities
        # use different transport protocol
        record_route();
        # loose-route processing
        if (loose_route()) {
    t_relay();
                break;
        };

        # if the request is for other domain use UsrLoc
        # (in case, it does not work, use the following command
        # with proper names and addresses in it)
        if (uri==myself) {

                if (method=="REGISTER") {

# Uncomment this if you want to use digest authentication
                        if (!www_authorize("172.16.24.180", "subscriber")) {
                                www_challenge("172.16.24.180", "0");
                                break;
                        };

                        save("location");
                        break;
                };

                # native SIP destinations are handled using our USRLOC DB
                if (!lookup("location")) {
 sl_send_reply("404", "Not Found");
                        break;
                };
        };
        # forward to current uri now; use stateful forwarding; that
        # works reliably even if we forward from TCP to UDP
        if (!t_relay()) {
                sl_reply_error();
        };

}



_______________________________________________
Serusers mailing list
serusers at lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers