[Serusers] SER 0.8.13 Segmentation Fault

[Ezequiel Colombo]

Bogdan, thanks, after fixed this (put load tm at top) ser like to start ok.
(now i need make some changes in the mysql database due to the field name
change of the "version" table)
(column 191 at config.h [#define VERSION_COLUMN "table_version"], in 0.8.12
the column name is "version")

Do you known if this version of SEMS work fine with SER 0.8.13 ???
sems.cpp ( $Id: sems.cpp,v 1.4 2004/02/28 12:47:29 rco Exp $ )

I ask this due to the note in the NEWS file of SER 0.8.13:

   vm_reply() fifo functions was replcaed by TM with t_reply() fifo function
   NOTE!! because current version of SEMS/AA try to send reply via vm_reply,
   it will not work with the TM version.

Regards
Ezequiel Colombo

----- Original Message -----
From: "Bogdan-Andrei IANCU" <iancu at fokus.fraunhofer.de>
To: "Ezequiel Colombo" <ecolombo at arcotel.net>; <serusers at lists.iptel.org>
Sent: Thursday, July 01, 2004 4:45 PM
Subject: Re: [Serusers] SER 0.8.13 Segmentation Fault


> Hi Ezequiel,
>
> thanks for info. I found the problem: you are loading acc module before
> tm nad acc iss based on tm (it tries to register some callbacks, but tm
> is not init yet). So,the fast solution is to load acc after tm. I will
> try to fix it properly in the mean while.
>
> thanks for report,
> bogdan
>
> Ezequiel Colombo wrote:
> > Hi Bogdan, thanks for your quickly response.
> > I have packed my sip_router (sources) directory with the core.22059.gz
file
> > (the core dump [w/ulimit unlimited])
> >
> > You can try download this tarball at
> > http://200.80.35.17/sip_router.seg_fault.0.8.13.tar.gz {8.3Mb long}
> >
> > Thanks again, and reply back to me if you have any solution or request.
> > Ezequiel Colombo
> >
> >
> > ----- Original Message -----
> > From: "Bogdan-Andrei IANCU" <iancu at fokus.fraunhofer.de>
> > To: "Ezequiel Colombo" <ecolombo at arcotel.net>
> > Cc: <serusers at lists.iptel.org>
> > Sent: Thursday, July 01, 2004 4:02 PM
> > Subject: Re: [Serusers] SER 0.8.13 Segmentation Fault
> >
> >
> >
> >>Hi,
> >>
> >>thanks for the report. Please be sure to get a core (do ulimit -c
> >>unlimited before runing ser) and send us the backtrace. if possible put
> >>on some public ftp/http site the core and the sources.
> >>
> >>thanks again,
> >>bogdan
> >>
> >>Ezequiel Colombo wrote:
> >>
> >>>Hi, i am trying to upgrade to 0.8.13 and get Segmentation Fault when
run
> >>>SER.
> >>>All the CVS source compile fine and the configuration test with "-c"
> >>>pass but SER dont start.
> >>>I have the core dump file, if any of the developers can help me please
> >>>request it off the list.
> >>>
> >>>[root at billing sip_router]# ./ser -f ./ser.cfg -E -D -d
> >>>Listening on
> >>>             udp: 172.16.0.1 [172.16.0.1]:5060
> >>>             tcp: 172.16.0.1 [172.16.0.1]:5060
> >>>Aliases:
> >>>             tcp: labo:5060
> >>>             tcp: labo.arcotel.net:5060
> >>>             udp: labodomain:5060
> >>>             udp: labo.labodomain.net:5060
> >>>             *: labodomain.net:*
> >>>
> >>>WARNING: no fork mode
> >>>acc - initializing
> >>>Segmentation fault
> >>>
> >>>Thanks
> >>>Ezequiel Colombo
> >>>
> >>>
>
>>>------------------------------------------------------------------------
> >>>
> >>>_______________________________________________
> >>>Serusers mailing list
> >>>serusers at lists.iptel.org
> >>>http://lists.iptel.org/mailman/listinfo/serusers
> >>
> >>
> >
>
>