[Serusers] ser/radius accounting not happening

[Madan]

here is the radacct table which records the accounting, let me know if you
need other details


+---------------------+---------------------+
| AcctStartTime       | AcctStopTime        |
+---------------------+---------------------+

 2004-01-19 18:11:48 | 0000-00-00 00:00:00 |
| 2004-01-19 18:11:48 | 0000-00-00 00:00:00 |
| 2004-01-19 18:12:01 | 2004-01-19 18:12:01 |
| 2004-01-19 18:12:19 | 2004-01-19 18:12:19 |
| 2004-01-20 18:43:14 | 0000-00-00 00:00:00 |
| 2004-01-20 18:43:15 | 0000-00-00 00:00:00 |
| 2004-01-20 18:43:53 | 2004-01-20 18:43:53 |


----- Original Message ----- 
From: "Jan Janak" <jan at iptel.org>
To: "Madan" <madan.r at net4india.net>
Cc: <serusers at lists.iptel.org>
Sent: Tuesday, January 20, 2004 9:18 PM
Subject: Re: [Serusers] ser/radius accounting not happening


> Could you post some examples of start and stop records with the same
> time ?
>
>  Jan.
>
> On 17-01 08:35, Madan wrote:
> > Hi List,
> > I 'am facing a problem with ser/radius configuration which is working
fine except for the accounting part. In freeradius accounting details I see
that both start and stop time is same, can somebody help me on how to fix
this.
> >
> > here is my ser.cfg
> >
> > #
> > # ----------- global configuration parameters ------------------------
> > debug=9         # debug level (cmd line: -dddddddddd)
> > fork=no
> > log_stderror=yes # (cmd line: -E)
> > listen=10.0.0.1
> > /* Uncomment these lines to enter debugging mode
> > debug=7
> > fork=no
> > log_stderror=yes
> > */
> >
> > check_via=no # (cmd. line: -v)
> > dns=no           # (cmd. line: -r)
> > rev_dns=no      # (cmd. line: -R)
> > port=5060
> > children=4
> > fifo="/tmp/ser_fifo"
> >
> > # ------------------ module loading ----------------------------------
> >
> > # Uncomment this if you want to use SQL database
> > loadmodule "/usr/local/lib/ser/modules/mysql.so"
> > loadmodule "/usr/local/lib/ser/modules/sl.so"
> > loadmodule "/usr/local/lib/ser/modules/tm.so"
> > loadmodule "/usr/local/lib/ser/modules/rr.so"
> > loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
> > loadmodule "/usr/local/lib/ser/modules/usrloc.so"
> > loadmodule "/usr/local/lib/ser/modules/registrar.so"
> > loadmodule "/usr/local/lib/ser/modules/uri.so"
> > loadmodule "/usr/local/lib/ser/modules/auth.so"
> > loadmodule "/usr/local/lib/ser/modules/auth_db.so"
> > loadmodule "/usr/local/lib/ser/modules/acc.so"
> > loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
> > loadmodule "/usr/local/lib/ser/modules/group_radius.so"
> >
> >
> > # ----------------- setting module-specific parameters ---------------
> >
> > # -- usrloc params --
> >
> > modparam("usrloc", "db_mode",   2)
> > modparam("auth_radius",
"radius_config","/usr/local/etc/radiusclient/radiusclient.conf")
> > #modparam("auth_radius", "service_type", 15)
> >
> > # -- rr params --
> > # add value to ;lr param to make some broken UAs happy
> > modparam("rr", "enable_full_lr", 1)
> > modparam("acc", "log_level", 1)
> > modparam("acc", "radius_flag", 1)
> >
> > # -------------------------  request routing logic -------------------
> > # main routing logic
> >
> > route{
> > # initial sanity checks -- messages with
> >         # max_forwards==0, or excessively long requests
> >         if (!mf_process_maxfwd_header("10")) {
> >                 sl_send_reply("483","Too Many Hops");
> >                 break;
> >         };
> >         if (len_gt( max_len )) {
> >                 sl_send_reply("513", "Message too big");
> >                 break;
> >         };
> >
> >
> >
> > # we record-route all messages -- to make sure that
> > # subsequent messages will go through our proxy; that's
> > # particularly good if upstream and downstream entities
> > # use different transport protocol
> > record_route();
> > # loose-route processing
> > # t_relay();
> > # break;
> > # };
> >
> > if (loose_route()) {
> >
> >          if (method=="BYE" || method=="CANCEL") {
> >                  log (1, "BYE or CANCEL\n");
> >                  setflag(1);
> >          };
> >
> >
> >          t_relay();
> >          break;
> >   };
> >
> >
> >
> >
> > # if the request is for other domain use UsrLoc
> >         # (in case, it does not work, use the following command
> >         # with proper names and addresses in it)
> >
> >         if (method=="REGISTER") {
> >
> >                 log(1, "REGISTER: Authenticating user\n");
> >
> >                 if (!radius_www_authorize("")) {
> >                         log(1, "REGISTER: challenging user\n");
> >                         www_challenge("", "0");
> >                         break;
> >                 };
> >                 save("location");
> >                 break;
> >         };
> >
> >
############################################################################
##############################
> >         if (uri=~"^sip:44[127][0-9]+ at .*$")
> >         {
> >
> >               if (rewritehostport("10.0.0.8:5060"))
> >               {
> >                 if (!t_relay())
> >                 {
> >                    sl_reply_error();
> >                 };
> >
> >               }
> >               else
> >               {
> >                 sl_reply_error ();
> >               };
> >               break;
> >
> >         }
> >         else if (method=="INVITE")
> >         {
> >                 sl_send_reply("403", "Call cannot be served here");
> >
> >         };
> >
> >
> >         # account completed transactions via syslog
> >         setflag(1);
> >
> >
> >
############################################################################
###################################
> >         if (method=="INVITE") {
> >
> >                 log(1, "INVITE\n");
> >                 setflag(1); /* set for accounting (the same value as in
> > log_flag!) */
> >         };
> >
> >         if (method=="MESSAGE") {
> >                 log(1, "MESSAGE\n");
> >                 setflag(1); /* set for accounting (the same value as in
> > log_flag!) */
> >         };
> >
> >         if (method=="BYE" || method=="CANCEL") {
> >                 log (1, "BYE or CANCEL\n");
> >                 setflag(1);
> >         };
> >
> >         # native SIP destinations are handled using our USRLOC DB
> >         if (!lookup("location")) {
> >                 sl_send_reply("404", "Not Found");
> >                 break;
> >         };
> >         if (!t_relay()) {
> >                 sl_reply_error();
> >                 break;
> >         };
> >
> >
> > }
> >
> >
>
> > _______________________________________________
> > Serusers mailing list
> > serusers at lists.iptel.org
> > http://lists.iptel.org/mailman/listinfo/serusers
>
>