[Serusers] ser/radius accounting not happening

Jan Janak jan at iptel.org
Tue Jan 20 16:48:18 CET 2004


Could you post some examples of start and stop records with the same
time ?

 Jan.

On 17-01 08:35, Madan wrote:
> Hi List,
> I 'am facing a problem with ser/radius configuration which is working fine except for the accounting part. In freeradius accounting details I see that both start and stop time is same, can somebody help me on how to fix this.
> 
> here is my ser.cfg
> 
> #
> # ----------- global configuration parameters ------------------------
> debug=9         # debug level (cmd line: -dddddddddd)
> fork=no
> log_stderror=yes # (cmd line: -E)
> listen=10.0.0.1
> /* Uncomment these lines to enter debugging mode 
> debug=7
> fork=no
> log_stderror=yes
> */
> 
> check_via=no # (cmd. line: -v)
> dns=no           # (cmd. line: -r)
> rev_dns=no      # (cmd. line: -R)
> port=5060
> children=4
> fifo="/tmp/ser_fifo"
> 
> # ------------------ module loading ----------------------------------
> 
> # Uncomment this if you want to use SQL database
> loadmodule "/usr/local/lib/ser/modules/mysql.so"
> loadmodule "/usr/local/lib/ser/modules/sl.so"
> loadmodule "/usr/local/lib/ser/modules/tm.so"
> loadmodule "/usr/local/lib/ser/modules/rr.so"
> loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
> loadmodule "/usr/local/lib/ser/modules/usrloc.so"
> loadmodule "/usr/local/lib/ser/modules/registrar.so"
> loadmodule "/usr/local/lib/ser/modules/uri.so"
> loadmodule "/usr/local/lib/ser/modules/auth.so"
> loadmodule "/usr/local/lib/ser/modules/auth_db.so"
> loadmodule "/usr/local/lib/ser/modules/acc.so"
> loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
> loadmodule "/usr/local/lib/ser/modules/group_radius.so"
> 
> 
> # ----------------- setting module-specific parameters ---------------
> 
> # -- usrloc params --
> 
> modparam("usrloc", "db_mode",   2)
> modparam("auth_radius", "radius_config","/usr/local/etc/radiusclient/radiusclient.conf")
> #modparam("auth_radius", "service_type", 15)
> 
> # -- rr params --
> # add value to ;lr param to make some broken UAs happy
> modparam("rr", "enable_full_lr", 1)
> modparam("acc", "log_level", 1)
> modparam("acc", "radius_flag", 1)
> 
> # -------------------------  request routing logic -------------------
> # main routing logic
> 
> route{
> # initial sanity checks -- messages with
>         # max_forwards==0, or excessively long requests
>         if (!mf_process_maxfwd_header("10")) {
>                 sl_send_reply("483","Too Many Hops");
>                 break;
>         };
>         if (len_gt( max_len )) {
>                 sl_send_reply("513", "Message too big");
>                 break;
>         };
> 
> 
> 
> # we record-route all messages -- to make sure that
> # subsequent messages will go through our proxy; that's
> # particularly good if upstream and downstream entities
> # use different transport protocol
> record_route(); 
> # loose-route processing
> # t_relay();
> # break;
> # };
> 
> if (loose_route()) {
> 
>          if (method=="BYE" || method=="CANCEL") {
>                  log (1, "BYE or CANCEL\n");
>                  setflag(1);
>          };
> 
> 
>          t_relay();
>          break;
>   };
> 
> 
> 
> 
> # if the request is for other domain use UsrLoc
>         # (in case, it does not work, use the following command
>         # with proper names and addresses in it)
> 
>         if (method=="REGISTER") {
> 
>                 log(1, "REGISTER: Authenticating user\n");
> 
>                 if (!radius_www_authorize("")) {
>                         log(1, "REGISTER: challenging user\n");
>                         www_challenge("", "0");
>                         break;
>                 };
>                 save("location");
>                 break;
>         };
> 
> ##########################################################################################################
>         if (uri=~"^sip:44[127][0-9]+ at .*$")
>         {
> 
>               if (rewritehostport("10.0.0.8:5060"))
>               {
>                 if (!t_relay())
>                 {
>                    sl_reply_error();
>                 };
> 
>               }
>               else
>               {
>                 sl_reply_error ();
>               };
>               break;
> 
>         }
>         else if (method=="INVITE") 
>         {
>                 sl_send_reply("403", "Call cannot be served here");
> 
>         };
> 
> 
>         # account completed transactions via syslog
>         setflag(1);
> 
> 
> ###############################################################################################################
>         if (method=="INVITE") {
> 
>                 log(1, "INVITE\n");
>                 setflag(1); /* set for accounting (the same value as in
> log_flag!) */
>         };
> 
>         if (method=="MESSAGE") {
>                 log(1, "MESSAGE\n");
>                 setflag(1); /* set for accounting (the same value as in
> log_flag!) */
>         };
> 
>         if (method=="BYE" || method=="CANCEL") {
>                 log (1, "BYE or CANCEL\n");
>                 setflag(1);
>         };
> 
>         # native SIP destinations are handled using our USRLOC DB
>         if (!lookup("location")) {
>                 sl_send_reply("404", "Not Found");
>                 break;
>         };
>         if (!t_relay()) {
>                 sl_reply_error();
>                 break;
>         };
> 
> 
> }
> 
> 

> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers




More information about the sr-users mailing list