AW: [Serusers] Cisco As5300 SIP/ISDN Interworking

[Wolfgang Platzer]

Yes I know this possibility. But I don't want to lose one port for Fax
calls. I looked for solution where I can set this IE per call basis like
in H.323.

regards,
wolfgang
 
> You know that you can set that with the bearer-cap voice-port 
> command? Is that what you were referring to?
> 
> Router(config)# voice-port 0:D
> Router(config-voiceport)# bearer-cap 3100hz
> 
> 
> -----Original Message-----
> From: serusers-bounces at iptel.org [mailto:serusers-bounces at lists.iptel.org]On
> Behalf Of Wolfgang Platzer
> Sent: 16 February 2004 07:41
> To: serusers at lists.iptel.org
> Subject: [Serusers] Cisco As5300 SIP/ISDN Interworking
> 
> 
> 
> Hi,
> 
> does anybode know a SIP/SDP field that can be used to set the 
> Bearer Capability to Speech or 3.1 kHz on the outgoing Setup 
> message? We need this for FAX calls because some devices do 
> not accept speech calls.
> 
> regards,
> wolfgang
> 
> 
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
> 
> 
> --------------------------------------------------------------
> -----------------------------------------
> This email, and any files transmitted with it, is copyright 
> and may contain confidential information. The contents are 
> intended for the use of the addressee(s) only. Unauthorized 
> use may be unlawful. If you receive this email by mistake, 
> please advise sender immediately. The views of the author may 
> not necessarily constitute the views of Telco Electronics 
> Limited. Nothing in this mail shall bind Telco Electronics 
> Limited in any contract or obligation.
> 
> Telco Electronics Limited
> 6-8 Oxford Court
> Brackley
> Northants
> NN13 7XY
> 
> Tel 07000 701999
> Fax 07000 701777
>