[Serusers] Cisco As5300 SIP/ISDN Interworking

[Alan Litster]

You know that you can set that with the bearer-cap voice-port command? Is
that what you were referring to?

Router(config)# voice-port 0:D
Router(config-voiceport)# bearer-cap 3100hz


-----Original Message-----
From: serusers-bounces at iptel.org [mailto:serusers-bounces at lists.iptel.org]On
Behalf Of Wolfgang Platzer
Sent: 16 February 2004 07:41
To: serusers at lists.iptel.org
Subject: [Serusers] Cisco As5300 SIP/ISDN Interworking



Hi,

does anybode know a SIP/SDP field that can be used to set the Bearer
Capability to Speech or 3.1 kHz on the outgoing Setup message? We need
this for FAX calls because some devices do not accept speech calls.

regards,
wolfgang


_______________________________________________
Serusers mailing list
serusers at lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers


-------------------------------------------------------------------------------------------------------
This email, and any files transmitted with it, is copyright and may contain confidential information.
The contents are intended for the use of the addressee(s) only.
Unauthorized use may be unlawful.
If you receive this email by mistake, please advise sender immediately.
The views of the author may not necessarily constitute the views of Telco Electronics Limited.
Nothing in this mail shall bind Telco Electronics Limited in any contract or obligation.

Telco Electronics Limited
6-8 Oxford Court
Brackley
Northants
NN13 7XY

Tel 07000 701999
Fax 07000 701777