[Serusers] nathelper

Dinesh feedbak at imelhk.com
Mon Feb 2 11:58:42 CET 2004


I am using Flag 6 to indicate behind NAT however when I look in the
mysql - ser -location - flags field shows a 1 in that column and not a 6
is this as it should be?

My ser.cfg is below.

Thanks,
Dinesh


fork=yes
log_stderror=no	# (cmd line: -E)
check_via=no	# (cmd. line: -v)
dns=no           # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/ser_fifo"

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database
loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/nathelper.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/textops.so"

# Uncomment this if you want digest authentication
# mysql.so must be loaded !
#loadmodule "/usr/local/lib/ser/modules/auth.so"
#loadmodule "/usr/local/lib/ser/modules/auth_db.so"

# ----------------- setting module-specific parameters ---------------

# -- usrloc params --

#modparam("usrloc", "db_mode",   0)

# Uncomment this if you want to use SQL database 
# for persistent storage and comment the previous line
# No Cache
#modparam("usrloc", "db_mode", 1)
# With Cache
modparam("usrloc", "db_mode", 2)

# -- auth params --
# Uncomment if you are using auth module
#
#modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this
config), 
# uncomment also the following parameter)
#
#modparam("auth_db", "password_column", "password")

# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)

#  Nathelper
modparam("registrar", "nat_flag", 6)
modparam("nathelper", "natping_interval", 30) # Ping interval 30 s
modparam("nathelper", "ping_nated_only", 1)   # Ping only clients behind
NAT

# -------------------------  request routing logic -------------------

# main routing logic

route{

	# initial sanity checks -- messages with
	# max_forwards==0, or excessively long requests
	if (!mf_process_maxfwd_header("10")) {
		sl_send_reply("483","Too Many Hops");
		break;
	};
	if (msg:len >=  max_len ) {
		sl_send_reply("513", "Message too big");
		break;
	};

     # !! Nathelper
	# Special handling for NATed clients; first, NAT test is
	# executed: it looks for via!=received and RFC1918 addresses
	# in Contact (may fail if line-folding is used); also,
	# the received test should, if completed, should check all
	# vias for rpesence of received
	if (nat_uac_test("2")) {
		# Allow RR-ed requests, as these may indicate that
		# a NAT-enabled proxy takes care of it; unless it is
		# a REGISTER

		if (method == "REGISTER" || ! search("^Record-Route:"))
{
		    log("LOG: Someone trying to register from private
IP, rewriting\n");
		    fix_nated_contact(); # Rewrite contact with source
IP of signalling
		    if (method == "INVITE") {
		        fix_nated_sdp("1"); # Add direction=active to
SDP
		    };
		    force_rport(); # Add rport parameter to topmost Via
		    setflag(6);    # Mark as NATed
		};
	};


	# we record-route all messages -- to make sure that
	# subsequent messages will go through our proxy; that's
	# particularly good if upstream and downstream entities
	# use different transport protocol
	if (!method=="REGISTER") record_route();	

	# subsequent messages withing a dialog should take the
	# path determined by record-routing
	if (loose_route()) {
		# mark routing logic in request
		append_hf("P-hint: rr-enforced\r\n"); 
		route(1);
		break;
	};

	if (!uri==myself) {
		# mark routing logic in request
		append_hf("P-hint: outbound\r\n"); 
		route(1);
		break;
	};


	if (uri==myself) {
		if (method=="INVITE") {
			record_route();
			if (isflagset(6)) {
				force_rtp_proxy();
			};
     	};


		if (method=="REGISTER") {
			save("location");
			break;
		};

		lookup("aliases");
		if (!uri==myself) {
			append_hf("P-hint: outbound alias\r\n"); 
			route(1);
			break;
		};


		# native SIP destinations are handled using our USRLOC
DB
		if (!lookup("location")) {
			sl_send_reply("404", "Not Found");
			break;
		};
	};
	append_hf("P-hint: usrloc applied\r\n"); 
	route(1);
}

route[1] 
{
	# send it out now; use stateful forwarding as it works reliably
	# even for UDP2TCP
	if (!t_relay()) {
		sl_reply_error();
	};
}

onreply_route[1] {
    # NATed transaction ?
    if (isflagset(6) && status =~ "(183)|2[0-9][0-9]") {
        fix_nated_contact();
	force_rtp_proxy();
    # otherwise, is it a transaction behind a NAT and we did not
    # know at time of request processing ? (RFC1918 contacts)
    } else if (nat_uac_test("1")) {
        fix_nated_contact();
    };
}




 




More information about the sr-users mailing list