[Serusers] SERWEB+SER help!!!!!
gaillac harry
gaillacharry at yahoo.fr
Tue Apr 27 14:40:15 CEST 2004
I don't wait ser users from list do my job, I always try to help users
if possible.
I started from simple scenarios and move to more complicated ones only
if the previous works, I never try to solve everything at once. ser is
able to start.
I looked up mailing list and admin's guide
My problem is quite simple.
I want to use serweb with ser -:) i can send and receive IM from serweb
because of i had if (!lookup("location"))
if (! t_newtran()) {
sl_reply_error();
break
};
# we do not care about anything else but MESSAGEs
if (!method=="MESSAGE") {
if (!t_reply("404", "Not found")) {
sl_reply_error();
};
break;
}; ....
Now I would like to configure ser to send missed calls to offline or
inline users with acc module but I can't because of I don't know where
to put logic routing, may be (lookup location) block !
Harry
Le mar 27/04/2004 à 14:03, Jan Janak a écrit :
> The reason why you don't get any reply from the mailing list is that you
> did not formulate your problem properly and did not provide us with
> enough information.
>
> We know that you have problems at the time when your email appears on
> the mailing list, but if you want an answer then you must put some extra
> effort into debugging. Don't expect that we will take your config file
> and try to find out what's wrong -- nobody has time for this. Re-sending
> it does not really help, no matter how many exclamations marks you use.
>
> If you want help from us then you need to specify your problems
> precisely. Write down scenarios which you want to implement, think what
> ser should do in each scenario, how SIP messages should look like and
> where they should be sent. After that start debugging each scenario
> separately, use ngrep to get SIP message dumps and see what's in the
> messages, make sure that ser, mysql server and sems (if used) is
> running. Start from simple scenarios and move to more complicated ones
> only if the previous works, do not try to solve everything at once.
>
> In my opinion this list is pretty good in helping others, we try to do
> our best, so think how to reformulate your message to make it easier to
> understand and read if you get no response.
>
> You get no reply to email like "here is my cfg, how do I make
> voicemail work", you probably get a quick reply if you write something like
> "ser does not forward my INVITE to voicemail, instead it replies with
> 4xx, sip dumps and config file are attached".
>
> Do you see the difference ? Well formed and written questions, one after
> another, that is the key. And yes, it requires more effort on our side,
> but nobody said that SIP was easy, all of us have to learn.
>
> In your particular case, I recommend you to get the default
> configuration file and make it work. Then mysql-related stuff like
> authentication and accounting, after that enable logging of missed
> calls, and so on.
>
> Jan.
>
> On 26-04 14:40, gaillac harry wrote:
> > Here is my ser.cg file. I try to configure send IM, Missed calls,
> > Voicemail.
> > I just can configure Send IM.
> > Now I can call isdngw, ivr,..
> >
> > I need help to configure lookup location logic for missed calls and
> > voicemail (offline users)
> >
> > Anybody could help me to configure the others functions (problem with
> > logic !!).
> >
> > harry
> > Regards
> >
> > #
> > # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $
> > #
> > # simple quick-start config script
> > #
> >
> > # ----------- global configuration parameters ------------------------
> >
> > #debug=3 # debug level (cmd line: -dddddddddd)
> > #fork=yes
> > #log_stderror=no # (cmd line: -E)
> >
> > /* Uncomment these lines to enter debugging mode
> > debug=7
> > fork=no
> > log_stderror=yes
> > */
> >
> > check_via=no # (cmd. line: -v)
> > dns=no # (cmd. line: -r)
> > rev_dns=no # (cmd. line: -R)
> > listen=192.168.0.1
> > port=5060
> > children=4
> > fifo="/tmp/ser_fifo"
> > fifo_mode=0666
> > # ------------------ module loading ----------------------------------
> >
> > # Uncomment this if you want to use SQL database
> > loadmodule "/usr/lib/ser/modules/mysql.so"
> >
> > loadmodule "/usr/lib/ser/modules/sl.so"
> > loadmodule "/usr/lib/ser/modules/tm.so"
> > loadmodule "/usr/lib/ser/modules/rr.so"
> > loadmodule "/usr/lib/ser/modules/maxfwd.so"
> > loadmodule "/usr/lib/ser/modules/usrloc.so"
> > loadmodule "/usr/lib/ser/modules/registrar.so"
> > loadmodule "/usr/lib/ser/modules/domain.so"
> > loadmodule "/usr/lib/ser/modules/msilo.so"
> > loadmodule "/usr/lib/ser/modules/acc.so"
> > loadmodule "/usr/lib/ser/modules/vm.so"
> > loadmodule "/usr/lib/ser/modules/uri.so"
> > loadmodule "/usr/lib/ser/modules/group.so"
> > loadmodule "/usr/lib/ser/modules/textops.so"
> >
> > # Uncomment this if you want digest authentication
> > # mysql.so must be loaded !
> > loadmodule "/usr/lib/ser/modules/auth.so"
> > loadmodule "/usr/lib/ser/modules/auth_db.so"
> >
> > # ----------------- setting module-specific parameters ---------------
> > # -- usrloc params --
> >
> > #modparam("usrloc", "db_mode", 0)
> >
> > # Uncomment this if you want to use SQL database
> > # for persistent storage and comment the previous line
> > modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser")
> > modparam("usrloc", "db_mode", 2)
> > modparam("usrloc", "use_domain", 1)
> >
> > # -- auth params --
> > # Uncomment if you are using auth module
> > #
> > modparam("auth_db", "calculate_ha1", yes)
> > #
> > # If you set "calculate_ha1" parameter to yes (which true in this config),
> > # uncomment also the following parameter)
> > #
> > modparam("auth_db", "password_column", "password")
> >
> > # -- rr params --
> > # add value to ;lr param to make some broken UAs happy
> > modparam("rr", "enable_full_lr", 1)
> >
> > # --registrar params--
> > modparam("registrar", "use_domain", 1)
> >
> > # --domain params--
> > modparam("domain", "db_url", "mysql://ser:heslo@localhost/ser")
> > modparam("domain", "db_mode", 1) # Use chaching
> >
> > # --acc params--
> > modparam("acc", "db_url", "mysql://ser:heslo@localhost/ser")
> > modparam("acc", "db_missed_flag", 3)
> >
> > # --msilo params--
> > modparam("msilo", "db_url", "mysql://ser:heslo@localhost/ser")
> > modparam("msilo", "db_table", "silo")
> > modparam("msilo","registrar","sip:registrar at 192.168.0.1")
> >
> > # --uri params--
> > #modparam("uri", "db_url", "mysql://ser:heslo@localhost/ser")
> > #modparam("uri", "subscriber_table", "subscriber")
> >
> >
> > # --vm params--
> > modparam("voicemail", "db_url", "mysql://ser:heslo@localhost/ser")
> >
> > # ------------------------- request routing logic -------------------
> >
> > # main routing logic
> >
> > route{
> >
> > # initial sanity checks -- messages with
> > # max_forwards==0, or excessively long requests
> > if (!mf_process_maxfwd_header("10")) {
> > sl_send_reply("483","Too Many Hops");
> > break;
> > };
> > if ( msg:len > max_len ) {
> > sl_send_reply("513", "Message too big");
> > break;
> > };
> >
> > # we record-route all messages -- to make sure that
> > # subsequent messages will go through our proxy; that's
> > # particularly good if upstream and downstream entities
> > # use different transport protocol
> > record_route();
> > # loose-route processing
> > if (loose_route()) {
> > t_relay();
> > break;
> > };
> >
> > # --isdn gateway--
> > if(method=="INVITE" || method=="BYE" || method=="CANCEL"){
> > if (uri=~"sip:[0-9]{10}@.*") {
> > route(2);
> > break;
> > };
> > };
> >
> > # --ivr conf--
> > if(method=="INVITE" || method=="BYE" || method=="CANCEL"){
> > if (uri=~"sip:5000 at .*") {
> > route(4);
> > break;
> > };
> > };
> >
> > # --conference--
> > if(method=="INVITE" || method=="BYE" || method=="CANCEL"){
> > if (uri=~"sip:6000 at .*") {
> > route(5);
> > break;
> > };
> > };
> >
> > # --play an annoucement--
> > if(method=="INVITE" || method=="BYE" || method=="CANCEL"){
> > if (uri=~"sip:7000 at .*") {
> > route(6);
> > break;
> > };
> > };
> >
> > # if the request is for other domain use UsrLoc
> > # (in case, it does not work, use the following command
> > # with proper names and addresses in it)
> > if (is_from_local()) {
> >
> > if (method=="REGISTER") {
> >
> > # Uncomment this if you want to use digest authentication
> > if (!www_authorize("", "subscriber")) {
> > www_challenge("", "0");
> > break;
> > };
> >
> > save("location");
> > # MSILO - dumping user's offline messages
> > if (m_dump())
> > {
> > log("MSILO: offline messages dumped - if they were\n");
> > }else{
> > log("MSILO: no offline messages dumped\n");
> > };
> > break;
> > };
> >
> > # does the user wish redirection on no availability? (i.e., is he
> > # in the voicemail (ser->grp) group?)
> > if (is_user_in("Request-URI", "voicemail")) {
> > t_on_failure("4");
> > setflag(4);
> > };
> >
> > # native SIP destinations are handled using our USRLOC DB
> > lookup("aliases");
> > if (!lookup("location")) {
> >
> > if (! t_newtran()) {
> > sl_reply_error();
> > break;
> > };
> > # we do not care about anything else but MESSAGEs
> > if (!method=="MESSAGE") {
> > if (!t_reply("404", "Not found")) {
> > sl_reply_error();
> > };
> > break;
> > };
> > log("MESSAGE received -> storing using MSILO\n");
> > # MSILO - storing as offline message
> > if (m_store("0")) {
> > log("MSILO: offline message stored\n");
> > if (!t_reply("202", "Accepted")) {
> > sl_reply_error();
> > };
> > }else{
> > log("MSILO: offline message NOT stored\n");
> > if (!t_reply("503", "Service Unavailable")) {
> > sl_reply_error();
> > };
> > };
> > break;
> > };
> > # if the downstream UA does not support MESSAGE requests
> > # go to failure_route[1]
> > t_on_failure("1");
> > t_relay();
> > break;
> > };
> > # forward to current uri now; use stateful forwarding; that
> > # works reliably even if we forward from TCP to UDP
> > if (!t_relay()) {
> > sl_reply_error();
> > };
> >
> > }
> >
> >
> > failure_route[1] {
> > # forwarding failed -- check if the request was a MESSAGE
> > if (!method=="MESSAGE")
> > {
> > break;
> > };
> >
> > log(1,"MSILO: the downstream UA does not support MESSAGE requests ...\n");
> > # we have changed the R-URI with the contact address -- ignore it now
> > if (m_store("1"))
> > {
> > log("MSILO: offline message stored\n");
> > t_reply("202", "Accepted for delivery");
> > }else{
> > log("MSILO: offline message NOT stored\n");
> > t_reply("503", "Service Unavailable");
> > };
> > }
> >
> > failure_route[4] {
> > route(3);
> > #append_branch("sip:80000 at 10.1.2.5");
> > append_urihf("CC-Diversion: ", "\r\n");
> > append_hf("P-hint: OFFLINE-VOICEMAIL\r\n");
> > t_relay();
> > }
> >
> > route[2] {
> > # ############################## #
> > # isdngw specific configuration #
> > # ############################## #
> > if(t_newtran()){
> >
> > if(method=="INVITE" || method=="BYE" || method=="CANCEL"){
> >
> > # send a response right at the start to avoid retransmissions
> > t_reply("100","Trying -- just wait a minute !");
> >
> > # isdngw only gets activated on invite requests
> > if(method=="INVITE"){
> >
> > # filename is defined in sems.conf.
> > if(uri=~"sip:[0-9]{10}@.*"){
> > if(!vm("/tmp/am_fifo","isdngw")){
> > log("could not contact isdngw\n");
> > t_reply("500","could not contact isdngw");
> > };
> > # Allow the announcement module of sems to be used as well.
> > # This can be useful for testing the isdngw.
> > } else if(uri=~"sip:7000 at .*"){
> > if(!vm("/tmp/am_fifo","announcement")){
> > log("could not contact announcement\n");
> > t_reply("500","could not contact announcement");
> > };
> > # we dont feel responsible for sip addresses of any other kind,
> > # so send the right error code.
> > } else {
> > t_reply("404","Not Found");
> > };
> > # stop routing here, the message is now processed by the media server
> > break;
> > };
> >
> > # The following handles the call termination, we must pass these requests
> > # to the media server as follows. Again make shure the fifo name and permissions
> > # are set correctly (like im sems.conf).
> > if((method=="BYE")||(method=="CANCEL")){
> > if(!vm("/tmp/am_fifo","bye")){
> > log("could not contact the media server\n");
> > t_reply("500","could not contact the media server");
> > };
> > break;
> > };
> > # other methods than INVITE, BYE and CANCEL are not handled by this SIP Server
> > # so we sent an error message
> > } else {
> > log("ERROR: method not supported\n");
> > t_reply("500", "sorry, method not supported");
> > };
> > } else {
> > # for any reason the transaction could not be created, send error code
> > log("could not create new transaction\n");
> > sl_send_reply("500","could not create new transaction");
> > };
> > # in isdngw.conf. Don't change this setting.
> > t_relay();
> > # end of routing.
> > }
> >
> > route[3] {
> > ############################################
> > # Voicemail specific configuration - begin #
> > ############################################
> > if(method=="ACK" || method=="INVITE" || method=="BYE"){
> >
> > if (!t_newtran()) {
> > log("could not create new transaction\n");
> > sl_send_reply("500","could not create new transaction");
> > break;
> > };
> >
> > t_reply("100","Trying -- just wait a minute !");
> > if(method=="INVITE"){
> > if(!vm("/tmp/am_fifo","voicemail")) {
> > log("couldn't contact announcement server\n");
> > t_reply("500", "couldn not contact announcement server");
> > };
> > break;
> > };
> >
> > if(method=="BYE" || method=="CANCEL") {
> > if(!vm("/tmp/am_fifo","bye")) {
> > log("could not contact the answer machine\n");
> > t_reply("500","could not contact the answer machine");
> > };
> > break;
> > };
> >
> > };
> > if (method=="CANCEL") {
> > sl_send_reply("200", "cancels are junked here");
> > break;
> > };
> > sl_send_reply("501", "method not understood here");
> > }
> >
> > route[4] {
> > ######################################
> > # ivr specific configuration - begin #
> > ######################################
> > if(method=="ACK" || method=="INVITE" || method=="BYE"){
> >
> > if (!t_newtran()) {
> > log("could not create new transaction\n");
> > sl_send_reply("500","could not create new transaction");
> > break;
> > };
> >
> > t_reply("100","Trying -- just wait a minute !");
> > if(method=="INVITE"){
> > log("**************** vm start - begin ******************\n");
> > if (uri=~"sip:5000 at .*") {
> > if (!vm("/tmp/am_fifo", "ivr")) {
> > log("couldn't contact ivr server\n");
> > t_reply("500", "couldn not contact ivr server");
> > };
> > };
> > log("**************** vm start - end ******************\n");
> > } else if(method=="BYE"){
> > log("**************** vm end - begin ******************\n");
> > if(!vm("/tmp/am_fifo","bye")){
> > log("could not contact ivr\n");
> > t_reply("500","could not contact ivr");
> > };
> > log("**************** vm end - end ******************\n");
> > };
> > break;
> > };
> > if (method=="CANCEL") {
> > sl_send_reply("200", "cancels are junked here");
> > break;
> > };
> > sl_send_reply("501", "method not understood here");
> > }
> >
> > route[5] {
> >
> > # ####################################
> > # conference specific configuration #
> > # ####################################
> > if(t_newtran()){
> >
> > if(method=="INVITE" || method=="BYE" || method=="CANCEL"){
> >
> > # send a response right at the start to avoid retransmissions
> > t_reply("100","Trying -- just wait a minute !");
> >
> > # isdngw only gets activated on invite requests
> > if(method=="INVITE"){
> >
> > # filename is defined in sems.conf.
> > if(uri=~"sip:6000 at .*"){
> > if(!vm("/tmp/am_fifo","conference")){
> > log("could not contact conference\n");
> > t_reply("500","could not contact conference");
> > };
> > # Allow the announcement module of sems to be used as well.
> > # This can be useful for testing the conference.
> > } else if(uri=~"sip:5000 at .*"){
> > if(!vm("/tmp/am_fifo","announcement")){
> > log("could not contact announcement\n");
> > t_reply("500","could not contact announcement");
> > };
> > # we dont feel responsible for sip addresses of any other kind,
> > # so send the right error code.
> > } else {
> > t_reply("404","Not Found");
> > };
> > # stop routing here, the message is now processed by the media server
> > break;
> > };
> >
> > # The following handles the call termination, we must pass these requests
> > # to the media server as follows. Again make shure the fifo name and permissions
> > # are set correctly (like im sems.conf).
> > if((method=="BYE")||(method=="CANCEL")){
> > if(!vm("/tmp/am_fifo","bye")){
> > log("could not contact the media server\n");
> > t_reply("500","could not contact the media server");
> > };
> > break;
> > };
> > # other methods than INVITE, BYE and CANCEL are not handled by this SIP Server
> > # so we sent an error message
> > } else {
> > log("ERROR: method not supported\n");
> > t_reply("500", "sorry, method not supported");
> > };
> > } else {
> > # for any reason the transaction could not be created, send error code
> > log("could not create new transaction\n");
> > sl_send_reply("500","could not create new transaction");
> > };
> > # in isdngw.conf. Don't change this setting.
> > t_relay();
> > # end of routing.
> > }
> >
> > route[6] {
> > ######################################
> > # announcement configuration - begin #
> > ######################################
> > if(method=="ACK" || method=="INVITE" || method=="BYE"){
> >
> > if (!t_newtran()) {
> > log("could not create new transaction\n");
> > sl_send_reply("500","could not create new transaction");
> > break;
> > };
> >
> > t_reply("100","Trying -- just wait a minute !");
> > if(method=="INVITE"){
> > log("**************** vm start - begin ******************\n");
> > if (uri=~"sip:7000 at .*") {
> > if (!vm("/tmp/am_fifo", "announcement")) {
> > log("couldn't contact ivr server\n");
> > t_reply("500", "couldn not contact announcement");
> > };
> > };
> > log("**************** vm start - end ******************\n");
> > } else if(method=="BYE"){
> > log("**************** vm end - begin ******************\n");
> > if(!vm("/tmp/am_fifo","bye")){
> > log("could not contact annoucement\n");
> > t_reply("500","could not contact annoucement");
> > };
> > log("**************** vm end - end ******************\n");
> > };
> > break;
> > };
> > if (method=="CANCEL") {
> > sl_send_reply("200", "cancels are junked here");
> > break;
> > };
> > sl_send_reply("501", "method not understood here");
> > }
> >
> > route[7] {
> > # non-Voip -- just send "off-line"
> > if (!(method=="INVITE" || method=="ACK" || method=="CANCEL")) {
> > sl_send_reply("404", "Not Found");
> > break;
> > };
> > if (t_newtran()) {
> > t_reply("404", "Not Found");
> > acc_db_request("404 missed call", "missed_calls");
> >
> > };
> > }
> >
> >
> >
> > _______________________________________________
> > Serusers mailing list
> > serusers at lists.iptel.org
> > http://lists.iptel.org/mailman/listinfo/serusers
More information about the sr-users
mailing list