[Serusers] Sems Error

Shirley shirleytoh at jpcomputers.com.sg
Thu Apr 8 15:46:13 CEST 2004 

Hi, 

Thank you for your reply. Now sems is running now...Thank you so much.

When I try to do test call. It show "connected" on my UA but I hear no audio
and the session ended. Please advice. Thanks again.
 <<logNoAudio.txt>> 
Regards, 
Shirley

> -----Original Message-----
> From:	Ulrich Abend [SMTP:ullstar at iptel.org]
> Sent:	Thursday, April 08, 2004 4:15 PM
> To:	serusers at lists.iptel.org
> Cc:	Shirley
> Subject:	Re: [Serusers] Sems Error
> 
> Hi,
> 
> from your debugging:
> 
> Apr  8 11:53:41 sipserver2 sems: (7785) DEBUG: loadAppPlugIn 
> (AmPlugIn.cpp:262): application 'number_reader' loaded.
> Apr  8 11:53:41 sipserver2 sems: (7785) WARNING: reloadModuleConfig 
> (SemsConfiguration.cpp:66): no configuration found for module
> number_reader, 
> maybe you want to specify config.number_reader in config file.
> Apr  8 11:53:41 sipserver2 sems: (7785) ERROR: onLoad
> (NumberReader.cpp:55): 
> required parameter number_path missing
> Apr  8 11:53:41 sipserver2 sems: (7785) ERROR: load (AmPlugIn.cpp:85):
> while 
> loading plug-in '/usr/local/lib/sems/plug-in/apps/number_reader.so'
> 
> This says that number reader refuses to start and therefor SEMS refuses to
> 
> start at all. You have two options now:
> 
> 1. configure number_reader to start by supplying valid entries in the 
> following new section of your sems.conf (edit wav to your valid path!):
> 
> config.number_reader=inline
> number_path=wav
> prolog_file=wav/prolog.wav
> epilog_file=wav/prolog.wav
> config.number_reader=end
> 
> 2. remove '/usr/local/lib/sems/plug-in/apps/number_reader.so', then sems 
> should start. Be careful, if you do a "make install" again, the module
> will 
> be regenerated, you might have to delete it again.
> 
> 
> I call this a bug in SEMS, we will fix it someday. Modules should start 
> without any configuration entries. By now, please use one of the options 
> above.
> 
> > I have also tested this ps ax | grep sems. I get this result:~
> > [root at sipserver2 root]# ps ax | grep sems
> >  5518 ?        S      1:25 gedit file:///etc/sems/sems.conf
> >  7805 pts/0    S      0:00 grep sems
> 
> This shows, that no SEMS is running, from all processes containing "sems"
> in 
> their command line, it's only your editor and the grep command itself.
> 
> Please always view the output of SEMS startup and review all lines
> starting 
> with ERROR.
> 
> Regards,
> 
> Uli.
> 
> 
> On Thursday 08 April 2004 06:05, Shirley wrote:
> > Hi,
> >
> > Thank you for your prompt reply.
> > I have  tested :~ set log_stderr=yes and fork=no and debug=3 in
> sems.conf.
> > I have attached the log. Please help.
> >
> >  <<SemsError1.txt>>  <<sems.conf>>
> > I have also tested this ps ax | grep sems. I get this result:~
> > [root at sipserver2 root]# ps ax | grep sems
> >  5518 ?        S      1:25 gedit file:///etc/sems/sems.conf
> >  7805 pts/0    S      0:00 grep sems
> >
> > Regards,
> > Shirley
> >
> > > -----Original Message-----
> > > From:	Ulrich Abend [SMTP:ullstar at iptel.org
> > > Sent:	Thursday, April 08, 2004 12:18 AM
> > > To:	Shirley
> > > Cc:	serusers at lists.iptel.org
> > > Subject:	Re: [Serusers] Sems Error
> > >
> > > Hi,
> > >
> > > try to set log_stderr=yes and fork=no and debug=3 in sems.conf for
> > > testing, it
> > > should produce a lot of debugging output on your console when starting
> > > up.
> > >
> > > There are a lot of possible reasons for SEMS not starting, please post
> > > the
> > >
> > > debugging output either from the commands above or from
> /var/log/syslog
> > > (under redhat the file might be another one under /var/log/ ...)
> > >
> > > You can also check is sems runs by calling in your shell:
> > >
> > >  ps ax | grep sems
> > >
> > > Regards,
> > >
> > > Uli.
> > >
> > > P.S.: Please always CC to the list, others might answer quicker than
> me
> > >
> > > :-)
> > >
> > > On Wednesday 07 April 2004 14:43, Shirley wrote:
> > > > Hi,
> > > >
> > > > Thank you for your reply. How to make sure that the SEMS is running?
> > > > I uses the /usr/local/sin/sems.redhat start- to start the sems
> service?
> > >
> > > Am
> > >
> > > > I correct?
> > > > My fifo name is same in both file that you mention. Please advice!
> > >
> > > Thanks
> > >
> > > > Regards,
> > > > Shirley
> > > >
> > > > > -----Original Message-----
> > > > > From:	Ulrich Abend [SMTP:ullstar at iptel.org]
> > > > > Sent:	Wednesday, April 07, 2004 8:00 PM
> > > > > To:	serusers at lists.iptel.org
> > > > > Cc:	Shirley
> > > > > Subject:	Re: [Serusers] Sems Error
> > > > >
> > > > > Hi,
> > > > >
> > > > > you should make shure, SEMS is running and uses the same fifo name
> > > > > (in sems.conf) as SER (in ser.cfg).
> > > > >
> > > > > It is also important, that the fifo file (default: /tmp/am_fifo)
> has
> > > > > write
> > > > >
> > > > > permissions for the user SER runs as. The easiest setup is to run
> SER
> > >
> > > and
> > >
> > > > > SEMS as the same user.
> > > > >
> > > > > If you still experience problems, please post SER and SEMS
> debugging
> > > > > output,
> > > > > the config files, and the results of
> > > > > ls -la /tmp/*fifo
> > > > >
> > > > > Regards,
> > > > >
> > > > > Uli.
> > > > >
> > > > > On Wednesday 07 April 2004 12:28, Shirley wrote:
> > > > > > Hi all,
> > > > > >
> > > > > > Please Help!!! I am trying to install the sems when I try to
> start
> > >
> > > the
> > >
> > > > > sems
> > > > >
> > > > > > I encountered this problem as per below. I am running on Linux
> 9.0
> > >
> > > and
> > >
> > > > > > please also advice on how to check the fifo version....Thanks
> > > > > >
> > > > > > Mar 24 19:04:25 sipserver2 /usr/local/sbin/ser[12876]: ERROR:
> > > > > > voicemail: ans_machine deamon is not running !
> > > > > > Mar 24 19:04:25 sipserver2 /usr/local/sbin/ser[12876]: ERROR:
> > > > > > voicemail:
> > > > >
> > > > > No
> > > > >
> > > > > > such device or address
> > > > > > Mar 24 19:04:25 sipserver2 /usr/local/sbin/ser[12876]: ERROR:
> > >
> > > vm_start:
> > > > > > write_to_fifo failed
> > > > > > Mar 24 19:04:35 sipserver2 /usr/local/sbin/ser[12874]: ERROR:
> > > > > > voicemail: ans_machine deamon is not running !
> > > > > > Mar 24 19:04:35 sipserver2 /usr/local/sbin/ser[12874]: ERROR:
> > > > > > voicemail:
> > > > >
> > > > > No
> > > > >
> > > > > > such device or address
> > > > > > Mar 24 19:04:35 sipserver2 /usr/local/sbin/ser[12874]: ERROR:
> > >
> > > vm_start:
> > > > > > write_to_fifo failed
> > > > > >
> > > > > > regards,
> > > > > > shirley
> > > > > >
> > > > > > _______________________________________________
> > > > > > Serusers mailing list
> > > > > > serusers at lists.iptel.org
> > > > > > http://lists.iptel.org/mailman/listinfo/serusers
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: logNoAudio.txt
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20040408/2b974497/attachment.txt>

More information about the sr-users mailing list