[Serusers] Doubt on Radius

[Jan Janak]

Hello,

there is ser-radius howto available, see

http://iptel.org/ser/ser_radius.html
 
   Jan.

On 16-09 03:10, Xten India wrote:
> Hi,
>    I have  installed 
>    ser-0.8.11, 
>    FreeRADIUS-0.9.0, 
>    radiusclient-0.3.2.
> I can register two useragents(Kphone) to ser with default authorization ( www_authorize())via mysql database.
> But when I use radius_www_authorize(),the useragent(Kphone)dostnot get authorized.
> What I have to do further to get radius authentication.
> Please help me
> Thanks in advance
> Regards
> Xten_india.
>  I get the following message in radius.log file.
> ------------------------------------------------  
> Sat Sep 13 13:29:48 2003 : Info: Listening on IP address 192.168.100.101, ports 1812/udp and 1813/udp, with proxy on 1814/udp.
> Sat Sep 13 13:29:48 2003 : Info: Ready to process requests.
> Sat Sep 13 13:30:04 2003 : Error: rlm_eap: EAP-Message not found
> Sat Sep 13 13:30:04 2003 : Auth: Login OK: [root/support] (from client ser port 1645)
> --------------------------------------------------
> My configuration file is
>  
> # Uncomment this if you want to use SQL database
> loadmodule "/usr/local/lib/ser/modules/mysql.so"
> loadmodule "/usr/local/lib/ser/modules/sl.so"
> loadmodule "/usr/local/lib/ser/modules/tm.so"
> loadmodule "/usr/local/lib/ser/modules/rr.so"
> loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
> loadmodule "/usr/local/lib/ser/modules/usrloc.so"
> loadmodule "/usr/local/lib/ser/modules/registrar.so"
> loadmodule "/usr/local/lib/ser/modules/acc.so"      
> loadmodule "/usr/local/lib/ser/modules/exec.so"
> loadmodule "/usr/local/lib/ser/modules/textops.so"
> # Uncomment this if you want digest authentication
> # mysql.so must be loaded !
> loadmodule "/usr/local/lib/ser/modules/auth.so"
> loadmodule "/usr/local/lib/ser/modules/auth_db.so"
> # ----------------- setting module-specific parameters ---------------
> # -- usrloc params --
> #modparam("usrloc", "db_mode",   0)
> # Uncomment this if you want to use SQL database 
> # for persistent storage and comment the previous line
> modparam("usrloc", "db_mode", 1)
> # -- auth params --
> # Uncomment if you are using auth module
> #
> loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
> modparam("auth_radius", "radius_config",
> "/usr/local/etc/radiusclient/radiusclient.conf")
> modparam("auth_db", "db_url","sql://root:support@localhost/radius")
> modparam("auth_db", "calculate_ha1", yes)
> #
> # If you set "calculate_ha1" parameter to yes (which true in this config), 
> # uncomment also the following parameter)
> #
> modparam("auth_db", "password_column", "password")
> # -- rr params --
> # add value to ;lr param to make some broken UAs happy
> modparam("rr", "enable_full_lr", 1)
> 
> modparam("acc", "log_level", 1)
> #modparam("acc", "radius_flag", 1)
> modparam("acc", "log_flag", 1)
> modparam("auth_radius", "service_type", 15)
> # -------------------------  request routing logic -------------------
> # main routing logic
> route{
>  # initial sanity checks -- messages with
>  # max_forwards==0, or excessively long requests
>  if (!mf_process_maxfwd_header("10")) {
>   sl_send_reply("483","Too Many Hops");
>   break;
>  };
>  if (len_gt( max_len )) {
>   sl_send_reply("513", "Message too big");
>   break;
>  };
>  # we record-route all messages -- to make sure that
>  # subsequent messages will go through our proxy; that's
>  # particularly good if upstream and downstream entities
>  # use different transport protocol
>  record_route(); 
>  # loose-route processing
>  if (loose_route()) {
>   t_relay();
>   break;
>  };
>  # if the request is for other domain use UsrLoc
>  # (in case, it does not work, use the following command
>  # with proper names and addresses in it)
> # if (uri==myself) {
>   if (method=="REGISTER") {
> # Uncomment this if you want to use digest authentication
>    if (!radius_www_authorize("localdomain.com")) {
>     www_challenge("localdomain.com", "0");
>     break;
>    };
>    save("location");
>    break;
>   };
>   # native SIP destinations are handled using our USRLOC DB
>   if (!lookup("location")) {
>    sl_send_reply("404", "Not Found");
>    break;
>   };
> # };
>  # forward to current uri now; use stateful forwarding; that
>  # works reliably even if we forward from TCP to UDP
>  if (!t_relay()) {
>   sl_reply_error();
>  };
> }
> 
> 
> ---------------------------------
> Do you Yahoo!?
> Yahoo! SiteBuilder - Free, easy-to-use web site design software
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers