[Serusers] Doubt on Radius

Xten India xten_india at yahoo.com
Tue Sep 16 12:10:12 CEST 2003


Hi,
   I have  installed 
   ser-0.8.11, 
   FreeRADIUS-0.9.0, 
   radiusclient-0.3.2.
I can register two useragents(Kphone) to ser with default authorization ( www_authorize())via mysql database.
But when I use radius_www_authorize(),the useragent(Kphone)dostnot get authorized.
What I have to do further to get radius authentication.
Please help me
Thanks in advance
Regards
Xten_india.
 I get the following message in radius.log file.
------------------------------------------------  
Sat Sep 13 13:29:48 2003 : Info: Listening on IP address 192.168.100.101, ports 1812/udp and 1813/udp, with proxy on 1814/udp.
Sat Sep 13 13:29:48 2003 : Info: Ready to process requests.
Sat Sep 13 13:30:04 2003 : Error: rlm_eap: EAP-Message not found
Sat Sep 13 13:30:04 2003 : Auth: Login OK: [root/support] (from client ser port 1645)
--------------------------------------------------
My configuration file is
 
# Uncomment this if you want to use SQL database
loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"
loadmodule "/usr/local/lib/ser/modules/acc.so"      
loadmodule "/usr/local/lib/ser/modules/exec.so"
loadmodule "/usr/local/lib/ser/modules/textops.so"
# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "/usr/local/lib/ser/modules/auth.so"
loadmodule "/usr/local/lib/ser/modules/auth_db.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
#modparam("usrloc", "db_mode",   0)
# Uncomment this if you want to use SQL database 
# for persistent storage and comment the previous line
modparam("usrloc", "db_mode", 1)
# -- auth params --
# Uncomment if you are using auth module
#
loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
modparam("auth_radius", "radius_config",
"/usr/local/etc/radiusclient/radiusclient.conf")
modparam("auth_db", "db_url","sql://root:support@localhost/radius")
modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config), 
# uncomment also the following parameter)
#
modparam("auth_db", "password_column", "password")
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)

modparam("acc", "log_level", 1)
#modparam("acc", "radius_flag", 1)
modparam("acc", "log_flag", 1)
modparam("auth_radius", "service_type", 15)
# -------------------------  request routing logic -------------------
# main routing logic
route{
 # initial sanity checks -- messages with
 # max_forwards==0, or excessively long requests
 if (!mf_process_maxfwd_header("10")) {
  sl_send_reply("483","Too Many Hops");
  break;
 };
 if (len_gt( max_len )) {
  sl_send_reply("513", "Message too big");
  break;
 };
 # we record-route all messages -- to make sure that
 # subsequent messages will go through our proxy; that's
 # particularly good if upstream and downstream entities
 # use different transport protocol
 record_route(); 
 # loose-route processing
 if (loose_route()) {
  t_relay();
  break;
 };
 # if the request is for other domain use UsrLoc
 # (in case, it does not work, use the following command
 # with proper names and addresses in it)
# if (uri==myself) {
  if (method=="REGISTER") {
# Uncomment this if you want to use digest authentication
   if (!radius_www_authorize("localdomain.com")) {
    www_challenge("localdomain.com", "0");
    break;
   };
   save("location");
   break;
  };
  # native SIP destinations are handled using our USRLOC DB
  if (!lookup("location")) {
   sl_send_reply("404", "Not Found");
   break;
  };
# };
 # forward to current uri now; use stateful forwarding; that
 # works reliably even if we forward from TCP to UDP
 if (!t_relay()) {
  sl_reply_error();
 };
}


---------------------------------
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20030916/aab23c03/attachment.htm>


More information about the sr-users mailing list