[Serusers] caller-id with raius using sip-rpid
Steve Dolloff
sdolloff at noc.dls.net
Thu Oct 2 22:18:49 CEST 2003
Any phone that supports caller-id. But I haven't gotten to work. I'm
seeing the username instead.
Subject: RE: [Serusers] caller-id with raius using sip-rpid
Which phone device should I use to see caller ID
information when using the ATA186?
Alejandro
--- Steve Dolloff <sdolloff at noc.dls.net> escreveu: >
At the top of the config I have the following
> statement....
>
> if (method=="INVITE") {
> record_route();
> if (!radius_www_authorize("")) {
> log(1,"radius auth
> failure");
>
> www_challenge("voip2.test.net","0");
> break;
> };
> append_rpid_hf();
> };
>
> If I call a phone with caller-id and my username is
> 256, it shows 256 on
> the phone, if I call with a username of test, it
> shows 4534 on the
> handset even though I have the sip-rpid set to 222.
>
> Stephen
>
>
> Subject: Re: [Serusers] caller-id with raius using
> sip-rpid
>
> Retrieving caller-id when users register doesn't
> work because REGISTER
> messages are processed by the server and the server
> generates a reply
> only.
>
> What you need is to insert Remote-Party-ID header
> field into INVITE
> message, to make it work you must authenticate also
> INVITE messages.
> My guess is that you do not authenticate INVITE
> messages and therefore
> there is nothing append_rpid_hf can add.
>
> Jan.
>
> On 02-10 11:35, Steve Dolloff wrote:
> > I want to retrieve the caller-id of a user from
> radius when they
> > register and use it when I redirect an invite
> request to the voicemail
> > system so that the voicemail system can route the
> call based on
> > caller-id. I also want to be able to send it to
> the sip gateway when
> I
> > am routing calls to the pstn.
> >
> > I have this in my config currently and it doesn't
> appear to set the
> > caller-id in the invite message.
> >
> >
> rewritehostport("209.242.10.153:5061");
> > append_rpid_hf();
> > t_relay();
> >
> >
> > Subject: Re: [Serusers] caller-id with raius using
> sip-rpid
> >
> > append_rpid_hf has no parameters. Version with 2
> parameters is in
> > unstable branch in the CVS only. What exactly do
> you want to do ?
> >
> > Jan.
> >
> > On 02-10 11:26, Steve Dolloff wrote:
> > > I found this example in a previous Serusers
> message.
> > >
> > > append_rpid_hf("<sip:+",
> > >
> > >
> >
>
"@zettou.net>;party=calling;id-type=subscriber;privacy=off;screen=yes");
> > >
> > > I tried calling append_rpid_hf();, but it does
> nothing.
> > >
> > > I also tried
> > >
> >
>
append_rpid_hf("party=calling;id-type=subscriber;privacy=off;screen=yes"
> > > ); but I get an unknown command presumably
> because I am not using
> the
> > > right number of parameters.
> > >
> > > I only want to modify the calling-id info.
> > >
> > > Can anyone provide an example?
> > >
> > > -----Original Message-----
> > > From: Jan Janak [mailto:jan at iptel.org]
> > > Sent: Thursday, October 02, 2003 11:09 AM
> > > To: Steve Dolloff
> > > Cc: serusers at lists.iptel.org
> > > Subject: Re: [Serusers] caller-id with raius
> using sip-rpid
> > >
> > > If you want to add Remote-Party-ID header field
> then you have to
> call
> > > append_rpid_hf function in your script.
> > >
> > > Jan.
> > >
> > > On 02-10 11:07, Steve Dolloff wrote:
> > > > OK, I am setting up a Voicemail system (using
> asterisk) and I am
> > > > currently doing a rewritehostport(ip:port) and
> then trelay() to
> send
> > > it
> > > > to the voicemail system if an invite fails.
> > > >
> > > > Should I change something? See my ser.cfg and
> output from the call
> > to
> > > > the vm.
> > > >
> > > > Here is the code from ser.cfg
> > > >
> > > >
> > > rewritehostport("219.242.10.153:5061");
> > > > t_relay();
> > > >
> > > > Here is the sip info from asterisk.
> > > >
> > > > INVITE sip:200 at 219.242.10.153:5061;user=phone
> SIP/2.0
> > > > Max-Forwards: 10
> > > > Record-Route:
> <sip:200 at 219.242.10.153;ftag=2236658534;lr=on>
> > > > Via: SIP/2.0/UDP
> 219.242.10.153;branch=z9hG4bK13de.31901234.0
> > > > Via: SIP/2.0/UDP
> 226.145.234.113:5060;rport=5060
> > > > From: sip:test at voip2.test.net;tag=2236658534
> > > > To: <sip:200 at voip2.test.net;user=phone>
> > > > Call-ID: 2218108971 at 226.145.234.113
> > > > CSeq: 1 INVITE
> > > > Contact:
> <sip:test at 226.145.234.113:5060;transport=udp>
> > > > User-Agent: Cisco ATA 186 v2.16.2 ata18x
> (030909a)
> > > > Expires: 300
> > > > Content-Length: 271
> > > > Content-Type: application/sdp
> > > >
> > > >
> > > >
> > > > Subject: Re: [Serusers] caller-id with raius
> using sip-rpid
> > > >
> > > > Remote-Party-ID header field is inserted into
> forwarded requests,
> > not
> > > > responses.
> > > >
> > > > Jan.
> > > >
> > > > On 02-10 10:53, Steve Dolloff wrote:
> > > > > Ser doesn't appear to be passing the
> Caller-id to the ata at
> auth
> > or
> > > I
> > > > > am doing something wrong. Can anyone point
> me in the right
> > > direction?
> > > > >
> > > > > Thanks,
> > > > >
> > > > > Stephen
> > > > >
> > > > > I have the following entry in my freeradius
> users file.
> > > > >
> > > > > test at voip2.test.net Auth-Type := Digest,
> User-Password == "test"
> > > > > Reply-Message = "Hello, test with
> digest", Sip-Rpid =
> > > > > "8472222222"
> > > > >
> > > > > When I run a radclient test I get the
> correct info..
> > > > >
> > > > > radclient -f digest.test 219.242.10.153:1812
> auth testing
> > > > > Received response ID 134, code 2, length =
> 57
>
=== message truncated ===
Yahoo! Mail - o melhor webmail do Brasil
http://mail.yahoo.com.br
More information about the sr-users
mailing list