[Serusers] Re: Problems with accounting - can't get stop records

marky mark at clubnet.lviv.ua
Thu Oct 2 21:51:39 CEST 2003


record route must be presen , in other case the next packets will be sent
directly between UAs as rar as i understood the logic of ser

regards

Mark
----- Original Message -----
From: "Jiri Kuthan" <jiri at iptel.org>
To: <Daniel-Constantin.Mierla at fokus.fraunhofer.de>; "Steven R. Bunin"
<steve at solaas.com>
Cc: <serusers at lists.iptel.org>
Sent: Tuesday, September 30, 2003 10:51 PM
Subject: Re: [Serusers] Re: Problems with accounting - can't get stop
records


> Indeed, Daniel hit the nail, thanks.
>
> Turning off record-routing as someone proposed previously is not
advicable.
> Not only subsequent requests, such as BYE, skip the proxy server. Getting
> the server out of loop may cause for example failed signaling if both
> parties use different signaling protocols and can't speak directly to
> each other.
>
> -jiri
>
> At 04:43 PM 9/30/2003, Daniel-Constantin Mierla wrote:
> >Hello,
> >the BYEs were not accounted because the next piece of configuration file:
> >
> >   if (loose_route()) {
> >        t_relay();
> >        break;
> >   };
> >
> >
> >BYEs are subsequent requests within a dialog and they include at least a
Route header and loose_route() returns true if no error occurs during
processing the top most. In the above piece of configuration after the loose
routing processing the request is forwarded to the next hope -- the one from
Route header -- without setting any flag for accounting. You have to set it
before t_relay(), e.g.,:
> >
> >   if (loose_route()) {
> >        if (method=="BYE" | ...){
> >            log (1, "Accounting flag on\n");
> >            setflag(1);
> >        };
> >        t_relay();
> >        break;
> >   };
> >
> >
> >Daniel
> >
> >
> >
> >On 9/30/2003 4:19 PM, Steven R. Bunin wrote:
> >
> >>Jaime,
> >>
> >>Thanks for the config. I managed to get it working yesterday by playing
with it
> >>quite a bit. What I ended up doing was moving my if (method=="bye") {}
statements
> >>to be the first thing after route { . I don't know what this worked but
it works
> >>even with loose_route() enabled. If you want a copy of my config just
let me know
> >>and I will send it out.
> >>
> >>Steve
> >>
> >>jaime.gil at orange.co.uk wrote:
> >>
> >>
> >>
> >>>Steven,
> >>>
> >>>This was the config used:
> >>>
> >>>#
> >>># $Id: ser.cfg,v 1.21 2003/06/04 13:47:36 jiri Exp $
> >>>#
> >>># simple quick-start config script
> >>>#
> >>>
> >>># ----------- global configuration parameters ------------------------
> >>>
> >>>debug=3         # debug level (cmd line: -dddddddddd)
> >>>fork=no
> >>>log_stderror=yes    # (cmd line: -E)
> >>>
> >>>/* Uncomment these lines to enter debugging mode
> >>>debug=7
> >>>fork=no
> >>>log_stderror=yes
> >>>*/
> >>>
> >>>check_via=no   # (cmd. line: -v)
> >>>dns=no           # (cmd. line: -r)
> >>>rev_dns=no      # (cmd. line: -R)
> >>>port=5060
> >>>children=4
> >>>fifo="/tmp/ser_fifo"
> >>>
> >>># ------------------ module loading ----------------------------------
> >>>
> >>># Uncomment this if you want to use SQL database
> >>>loadmodule "./modules/mysql/mysql.so"
> >>>
> >>>loadmodule "./modules/sl/sl.so"
> >>>loadmodule "./modules/tm/tm.so"
> >>>loadmodule "./modules/rr/rr.so"
> >>>loadmodule "./modules/maxfwd/maxfwd.so"
> >>>loadmodule "./modules/usrloc/usrloc.so"
> >>>loadmodule "./modules/registrar/registrar.so"
> >>>loadmodule "./modules/uri/uri.so"
> >>>
> >>># Uncomment this if you want digest authentication
> >>># mysql.so must be loaded !
> >>>loadmodule "./modules/auth/auth.so"
> >>>loadmodule "./modules/auth_db/auth_db.so"
> >>>
> >>>loadmodule "modules/acc/acc.so"
> >>>
> >>>loadmodule "./modules/auth_radius/auth_radius.so"
> >>>
> >>># ----------------- setting module-specific parameters ---------------
> >>>
> >>># -- usrloc params --
> >>>
> >>>modparam("usrloc", "db_mode",   2)
> >>>
> >>>modparam("auth_radius", "radius_config",
> >>>"/usr/local/etc/radiusclient/radiusclient.conf")
> >>>
> >>># -- rr params --
> >>># add value to ;lr param to make some broken UAs happy
> >>>modparam("rr", "enable_full_lr", 1)
> >>>
> >>>modparam("acc", "log_level", 1)
> >>>modparam("acc", "radius_flag", 1)
> >>>
> >>># -------------------------  request routing logic -------------------
> >>>
> >>>alias=xxxxx.orange.co.uk
> >>>
> >>># main routing logic
> >>>
> >>>route{
> >>>
> >>>    # initial sanity checks -- messages with
> >>>    # max_forwards==0, or excessively long requests
> >>>    if (!mf_process_maxfwd_header("10")) {
> >>>         sl_send_reply("483","Too Many Hops");
> >>>         break;
> >>>    };
> >>>    if (len_gt( max_len )) {
> >>>         sl_send_reply("513", "Message too big");
> >>>         break;
> >>>    };
> >>>
> >>>    # we record-route all messages -- to make sure that
> >>>    # subsequent messages will go through our proxy; that's
> >>>    # particularly good if upstream and downstream entities
> >>>    # use different transport protocol
> >>>    record_route();
> >>>    # loose-route processing
> >>>#    if (loose_route()) {
> >>>#         t_relay();
> >>>#         break;
> >>>#    };
> >>>
> >>>    # if the request is for other domain use UsrLoc
> >>>    # (in case, it does not work, use the following command
> >>>    # with proper names and addresses in it)
> >>>
> >>>    if (method=="REGISTER") {
> >>>
> >>>         log(1, "REGISTER: Authenticating user\n");
> >>>
> >>>         if (!radius_www_authorize("")) {
> >>>              log(1, "REGISTER: challenging user\n");
> >>>              www_challenge("", "0");
> >>>              break;
> >>>         };
> >>>         save("location");
> >>>         break;
> >>>    };
> >>>
> >>>    if (method=="INVITE") {
> >>>
> >>>         log(1, "INVITE\n");
> >>>
> >>>         setflag(1); /* set for accounting (the same value as in
log_flag!) */
> >>>    };
> >>>
> >>>    if (method=="MESSAGE") {
> >>>         log(1, "MESSAGE\n");
> >>>         setflag(1); /* set for accounting (the same value as in
log_flag!) */
> >>>    };
> >>>
> >>>    if (method=="BYE" || method=="CANCEL") {
> >>>         log (1, "BYE or CANCEL\n");
> >>>         setflag(1);
> >>>    };
> >>>
> >>>    # native SIP destinations are handled using our USRLOC DB
> >>>    if (!lookup("location")) {
> >>>         sl_send_reply("404", "Not Found");
> >>>         break;
> >>>    };
> >>>    if (!t_relay()) {
> >>>         sl_reply_error();
> >>>         break;
> >>>    };
> >>>
> >>>}
> >>>
> >>>"Steven R. Bunin" <steve at solaas.com> on 29/09/2003 19:01:55
> >>>
> >>>To:   Jaime GIL/EN/HTLUK at HTLUK
> >>>cc:   serusers at lists.iptel.org
> >>>
> >>>Subject:  re: Problems with accounting - can't get stop records
> >>>
> >>>Jaime,
> >>>
> >>>Thanks for the resposne.. I have my loose_route shut off. I think the
problem
> >>>may
> >>>have to do with an error message I am receiving which is "ERROR: reply
cannot be
> >>>parsed" from my stderr.
> >>>
> >>>Do you have a working version of a script that works with 0.8.11 and
gets stop
> >>>records I could look at? It should give me a hand.. I know I am so
close to
> >>>solving
> >>>this but it is a struggle.
> >>>
> >>>Steve
> >>>
> >>>jaime.gil at orange.co.uk wrote:
> >>>
> >>>
> >>>
> >>>>Steven,
> >>>>
> >>>>I remember having the same problem. In my case, the problem seemed to
be in
> >>>>
> >>>the
> >>>
> >>>
> >>>>loose_route processing. I don't know what it has to do with the
accounting
> >>>>module, but commenting out this part made the trick in my case.
> >>>>
> >>>>Jaime
> >>>>
> >>>>"Steven R. Bunin" <steve at solaas.com> on 26/09/2003 17:11:41
> >>>>
> >>>>To:   serusers at lists.iptel.org
> >>>>cc:    (bcc: Jaime GIL/EN/HTLUK)
> >>>>
> >>>>Subject:  [Serusers] Re: Serusers Digest, Vol 5, Issue 63
> >>>>
> >>>>Hi all,
> >>>>
> >>>>I have successfully gotten radius authentication working and I started
getting
> >>>>Radius Start records for accounting but I am not sure what I am doing
wrong in
> >>>>regards to getting radius Stop records.
> >>>>
> >>>>Below is the area I believe has the most affect on Radius Acccounting
from my
> >>>>Log File. Any suggestions would be appreciated and if it would help to
see the
> >>>>full Config file I will send it as well.
> >>>>
> >>>>record_route();
> >>>>
> >>>> if (method=="REGISTER") {
> >>>>
> >>>># Uncomment this if you want to use digest authentication
> >>>>  if (!radius_www_authorize("")) {
> >>>>   www_challenge("", "0");
> >>>>   break;
> >>>>  };
> >>>>
> >>>>  save("location");
> >>>>  break;
> >>>> };
> >>>>
> >>>>if (method =="INVITE")
> >>>>{
> >>>>log(1,"INVITE\n");
> >>>>setflag(1);
> >>>>};
> >>>>if (method=="MESSAGE") {
> >>>>log(1,"MESSAGE\n");
> >>>>setflag(1);
> >>>>};
> >>>>if (method=="BYE"){
> >>>>log (1, "BYE or CANCEL\n");
> >>>>setflag(1);
> >>>>};
> >>>>if (method=="CANCEL"){
> >>>>log (1, "BYE or CANCEL\n");
> >>>>setflag(1);
> >>>>};
> >>>>
> >>>>Thanks in advance,
> >>>>
> >>>>Steve
> >>>>
> >>>>_______________________________________________
> >>>>Serusers mailing list
> >>>>serusers at lists.iptel.org
> >>>>http://lists.iptel.org/mailman/listinfo/serusers
> >>>>
>
>>>> -----------------------------------------------------------------------
-
> >>>>              Name: att1.eml
> >>>>  att1.eml    Type: Internet E-Mail Message (message/rfc822)
> >>>>          Encoding: base64
> >>>>
>
>>>> -----------------------------------------------------------------------
-
> >>>>
> >>>>
> >>>>
>
>>>*************************************************************************
******
> >>>
> >>>
> >>>>Important.
> >>>>Confidentiality: This communication is intended for the above-named
person and
> >>>>may be confidential and/or legally privileged. Any opinions expressed
in this
> >>>>communication are not necessarily those of the company. If it has come
to you
> >>>>in error you must take no action based on it, nor must you copy or
show it to
> >>>>anyone; please delete/destroy and inform the sender immediately.
> >>>>
> >>>>Monitoring/Viruses
> >>>>Orange may monitor all incoming and outgoing emails in line with
current
> >>>>legislation.  Although we have taken steps to ensure that this email
and
> >>>>attachments are free from any virus, we advise that in keeping with
good
> >>>>computing practice the recipient should ensure they are actually virus
free.
> >>>>
> >>>>Orange PCS Limited is a subsidiary of Orange SA and is registered in
England
> >>>>
> >>>No
> >>>
> >>>
> >>>>2178917, with its address at St James Court, Great Park Road,
Almondsbury
> >>>>
> >>>Park,
> >>>
> >>>
> >>>>Bradley Stoke, Bristol BS32 4QJ.
> >>>>
> >>>>
>
>>>*************************************************************************
******
> >>>
> >>>--
> >>>Steven R. Bunin - Managing Partner
> >>>
> >>>SOLAAS LLC
> >>>10 East 39th Street
> >>>Suite 1125
> >>>New York, NY 10016
> >>>(+001) 212-532-6700
> >>>Cellular: 646-739-7000
> >>>Fax (+001) 212-532-6776
> >>>
> >>>http://www.solaas.com
> >>>
> >>>--
> >>>
> >>>This e-mail may contain confidential and/or privileged information. If
you are
> >>>not
> >>>the intended recipient (or have received this e-mail in error) please
notify the
> >>>sender immediately and destroy this e-mail. Any unauthorized copying,
disclosure
> >>>or
> >>>distribution of the material in this e-mail is strictly forbidden.
> >>>
>
>>> ------------------------------------------------------------------------
> >>>              Name: att1.eml
> >>>  att1.eml    Type: Internet E-Mail Message (message/rfc822)
> >>>          Encoding: base64
> >>>
>
>>> ------------------------------------------------------------------------
> >>>
>
>>>*************************************************************************
******
> >>>Important.
> >>>Confidentiality: This communication is intended for the above-named
person and
> >>>may be confidential and/or legally privileged. Any opinions expressed
in this
> >>>communication are not necessarily those of the company. If it has come
to you
> >>>in error you must take no action based on it, nor must you copy or show
it to
> >>>anyone; please delete/destroy and inform the sender immediately.
> >>>
> >>>Monitoring/Viruses
> >>>Orange may monitor all incoming and outgoing emails in line with
current
> >>>legislation.  Although we have taken steps to ensure that this email
and
> >>>attachments are free from any virus, we advise that in keeping with
good
> >>>computing practice the recipient should ensure they are actually virus
free.
> >>>
> >>>Orange PCS Limited is a subsidiary of Orange SA and is registered in
England No
> >>>2178917, with its address at St James Court, Great Park Road,
Almondsbury Park,
> >>>Bradley Stoke, Bristol BS32 4QJ.
>
>>>*************************************************************************
******
> >>>
> >>
> >>--
> >>Steven R. Bunin - Managing Partner
> >>
> >>SOLAAS LLC
> >>10 East 39th Street
> >>Suite 1125
> >>New York, NY 10016
> >>(+001) 212-532-6700
> >>Cellular: 646-739-7000
> >>Fax (+001) 212-532-6776
> >>
> >>http://www.solaas.com
> >>
> >>--
> >>
> >>This e-mail may contain confidential and/or privileged information. If
you are not
> >>the intended recipient (or have received this e-mail in error) please
notify the
> >>sender immediately and destroy this e-mail. Any unauthorized copying,
disclosure or
> >>distribution of the material in this e-mail is strictly forbidden.
> >>
> >>
> >>_______________________________________________
> >>Serusers mailing list
> >>serusers at lists.iptel.org
> >>http://lists.iptel.org/mailman/listinfo/serusers
> >>
> >>
> >
> >
> >_______________________________________________
> >Serusers mailing list
> >serusers at lists.iptel.org
> >http://lists.iptel.org/mailman/listinfo/serusers
>
> --
> Jiri Kuthan            http://iptel.org/~jiri/
>
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>





More information about the sr-users mailing list