[Serusers] Re: Serusers Digest, Vol 5, Issue 63
Steven R. Bunin
steve at solaas.com
Wed Oct 1 16:04:30 CEST 2003
Jan,
Thanks, it is working now.. I'm not sure it is the best way to do it, but it works.
Steve
Jan Janak wrote:
> Hello,
>
> so is it working now ? I was offline for couple of days and from your
> previous e-mail I got impression that you had some problems with radius
> stop messages.
>
> Jan.
>
> On 01-10 09:47, Steven R. Bunin wrote:
> > Jan,
> >
> > Here is my config that is allowing both start and stop accounting packages to the system. it is currently doing radius authentication as well. Most likely I will be setting the authentication to by Mysql
> > with just the accounting going to FreeRadius or possibly XTradius in the future.
> >
> > Steve
> >
> > #
> > # $Id: ser.cfg,v 1.21 2003/06/04 13:47:36 jiri Exp $
> > #
> > # simple quick-start config script
> > #
> >
> > # ----------- global configuration parameters ------------------------
> >
> > debug=3 # debug level (cmd line: -dddddddddd)
> > fork=yes
> > log_stderror=no # (cmd line: -E)
> >
> > /* Uncomment these lines to enter debugging mode
> > debug=7
> > fork=no
> > log_stderror=yes
> > */
> >
> > check_via=no # (cmd. line: -v)
> > dns=no # (cmd. line: -r)
> > rev_dns=no # (cmd. line: -R)
> > port=5060
> > children=4
> > fifo="/tmp/ser_fifo"
> >
> > # ------------------ module loading ----------------------------------
> >
> > # Uncomment this if you want to use SQL database
> > loadmodule "/usr/local/lib/ser/modules/mysql.so"
> >
> > loadmodule "/usr/local/lib/ser/modules/sl.so"
> > loadmodule "/usr/local/lib/ser/modules/tm.so"
> > loadmodule "/usr/local/lib/ser/modules/rr.so"
> > loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
> > loadmodule "/usr/local/lib/ser/modules/usrloc.so"
> > loadmodule "/usr/local/lib/ser/modules/registrar.so"
> >
> > # Uncomment this if you want digest authentication
> > # mysql.so must be loaded !
> > loadmodule "/usr/local/lib/ser/modules/auth.so"
> > loadmodule "/usr/local/lib/ser/modules/auth_db.so"
> > loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
> > loadmodule "/usr/local/lib/ser/modules/acc.so"
> > # ----------------- setting module-specific parameters ---------------
> >
> > # -- usrloc params --
> >
> > modparam("auth_radius","radius_config","/usr/local/etc/radiusclient/radiusclient.conf")
> >
> > #modparam("usrloc", "db_mode", 0)
> >
> > # Uncomment this if you want to use SQL database
> > # for persistent storage and comment the previous line
> > modparam("usrloc", "db_mode", 2)
> >
> > # -- auth params --
> > # Uncomment if you are using auth module
> > #
> > modparam("auth_db", "calculate_ha1", yes)
> > #
> > # If you set "calculate_ha1" parameter to yes (which true in this config),
> > # uncomment also the following parameter)
> > #
> > modparam("auth_db", "password_column", "password")
> >
> > # -- rr params --
> > # add value to ;lr param to make some broken UAs happy
> > modparam("rr", "enable_full_lr", 1)
> > modparam("acc","log_level",1)
> > modparam("acc","radius_flag",1)
> > # ------------------------- request routing logic -------------------
> >
> > # main routing logic
> >
> >
> >
> > route{
> >
> >
> > if (method =="INVITE" | method == "BYE")
> > {
> > log(1,"INVITE or BYE\n");
> > setflag(1);
> > };
> > if (method=="MESSAGE") {
> > log(1,"MESSAGE\n");
> > setflag(1);
> > };
> > if (method=="BYE"){
> > log (1, "BYEd or CANCEL\n");
> > setflag(1);
> > };
> > if (method=="CANCEL"){
> > log (1, "BYEe or CANCEL\n");
> > setflag(1);
> > };
> >
> > # initial sanity checks -- messages with
> > # max_forwards==0, or excessively long requests
> > if (!mf_process_maxfwd_header("10")) {
> > sl_send_reply("483","Too Many Hops");
> > break;
> > };
> > if (len_gt( max_len )) {
> > sl_send_reply("513", "Message too big");
> > break;
> > };
> >
> > # we record-route all messages -- to make sure that
> > # subsequent messages will go through our proxy; that's
> > # particularly good if upstream and downstream entities
> > # use different transport protocol
> > record_route();
> > # loose-route processing
> > if (loose_route()) {
> > t_relay();
> > break;
> > };
> >
> > # if the request is for other domain use UsrLoc
> > # (in case, it does not work, use the following command
> > # with proper names and addresses in it)
> > if (uri=~"sip.solaas.com") {
> >
> > if (method=="REGISTER") {
> >
> > # Uncomment this if you want to use digest authentication
> > if (!radius_www_authorize("")) {
> > www_challenge("", "0");
> > break;
> > };
> >
> > save("location");
> > break;
> > };
> >
> >
> >
> > if (uri=~"^sip:[0-9]*@sip.solaas.com") {
> > setflag(1);
> >
> > log("forwarding to PSTN");
> > prefix("xxxx");
> > t_relay_to_udp("xxx.xxx.xxx.xxx","5060");
> > break;
> > };
> >
> >
> >
> > # native SIP destinations are handled using our USRLOC DB
> > /* if (!lookup("location")) {
> > sl_send_reply("404", "Not Found");
> > break;
> > };
> > */
> > };
> > # forward to current uri now; use stateful forwarding; that
> > # works reliably even if we forward from TCP to UDP
> > if (!t_relay()) {
> > sl_reply_error();
> > };
> >
> > }
> >
> >
> >
> > Jan Janak wrote:
> >
> > > Please send me the whole config file.
> > >
> > > Jan.
> > >
> > > On 26-09 12:11, Steven R. Bunin wrote:
> > > > Hi all,
> > > >
> > > > I have successfully gotten radius authentication working and I started getting Radius Start records for accounting but I am not sure what I am doing wrong in regards to getting radius Stop records.
> > > >
> > > > Below is the area I believe has the most affect on Radius Acccounting from my Log File. Any suggestions would be appreciated and if it would help to see the full Config file I will send it as well.
> > > >
> > > >
> > > > record_route();
> > > >
> > > > if (method=="REGISTER") {
> > > >
> > > > # Uncomment this if you want to use digest authentication
> > > > if (!radius_www_authorize("")) {
> > > > www_challenge("", "0");
> > > > break;
> > > > };
> > > >
> > > > save("location");
> > > > break;
> > > > };
> > > >
> > > > if (method =="INVITE")
> > > > {
> > > > log(1,"INVITE\n");
> > > > setflag(1);
> > > > };
> > > > if (method=="MESSAGE") {
> > > > log(1,"MESSAGE\n");
> > > > setflag(1);
> > > > };
> > > > if (method=="BYE"){
> > > > log (1, "BYE or CANCEL\n");
> > > > setflag(1);
> > > > };
> > > > if (method=="CANCEL"){
> > > > log (1, "BYE or CANCEL\n");
> > > > setflag(1);
> > > > };
> > > >
> > > > Thanks in advance,
> > > >
> > > > Steve
> > > >
> > > > _______________________________________________
> > > > Serusers mailing list
> > > > serusers at lists.iptel.org
> > > > http://lists.iptel.org/mailman/listinfo/serusers
> >
> > --
> > Steven R. Bunin - Managing Partner
> >
> > SOLAAS LLC
> > 10 East 39th Street
> > Suite 1125
> > New York, NY 10016
> > (+001) 212-532-6700
> > Cellular: 646-739-7000
> > Fax (+001) 212-532-6776
> >
> > http://www.solaas.com
> >
> > --
> >
> > This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this
> > e-mail. Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden.
> >
> >
--
Steven R. Bunin - Managing Partner
SOLAAS LLC
10 East 39th Street
Suite 1125
New York, NY 10016
(+001) 212-532-6700
Cellular: 646-739-7000
Fax (+001) 212-532-6776
http://www.solaas.com
--
This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail.
Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden.
More information about the sr-users
mailing list