[Serusers] Re: Serusers Digest, Vol 5, Issue 63

Jan Janak jan at iptel.org
Wed Oct 1 15:57:23 CEST 2003


Hello,

so is it working now ? I was offline for couple of days and from your
previous e-mail I got impression that you had some problems with radius
stop messages.

  Jan.

On 01-10 09:47, Steven R. Bunin wrote:
> Jan,
> 
> Here is my config that is allowing both start and stop accounting packages to the system. it is currently doing radius authentication as well. Most likely I will be setting the authentication to by Mysql
> with just the accounting going to FreeRadius or possibly XTradius in the future.
> 
> Steve
> 
> #
> # $Id: ser.cfg,v 1.21 2003/06/04 13:47:36 jiri Exp $
> #
> # simple quick-start config script
> #
> 
> # ----------- global configuration parameters ------------------------
> 
> debug=3         # debug level (cmd line: -dddddddddd)
> fork=yes
> log_stderror=no # (cmd line: -E)
> 
> /* Uncomment these lines to enter debugging mode
> debug=7
> fork=no
> log_stderror=yes
> */
> 
> check_via=no # (cmd. line: -v)
> dns=no           # (cmd. line: -r)
> rev_dns=no      # (cmd. line: -R)
> port=5060
> children=4
> fifo="/tmp/ser_fifo"
> 
> # ------------------ module loading ----------------------------------
> 
> # Uncomment this if you want to use SQL database
> loadmodule "/usr/local/lib/ser/modules/mysql.so"
> 
> loadmodule "/usr/local/lib/ser/modules/sl.so"
> loadmodule "/usr/local/lib/ser/modules/tm.so"
> loadmodule "/usr/local/lib/ser/modules/rr.so"
> loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
> loadmodule "/usr/local/lib/ser/modules/usrloc.so"
> loadmodule "/usr/local/lib/ser/modules/registrar.so"
> 
> # Uncomment this if you want digest authentication
> # mysql.so must be loaded !
> loadmodule "/usr/local/lib/ser/modules/auth.so"
> loadmodule "/usr/local/lib/ser/modules/auth_db.so"
> loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
> loadmodule "/usr/local/lib/ser/modules/acc.so"
> # ----------------- setting module-specific parameters ---------------
> 
> # -- usrloc params --
> 
> modparam("auth_radius","radius_config","/usr/local/etc/radiusclient/radiusclient.conf")
> 
> #modparam("usrloc", "db_mode",   0)
> 
> # Uncomment this if you want to use SQL database
> # for persistent storage and comment the previous line
> modparam("usrloc", "db_mode", 2)
> 
> # -- auth params --
> # Uncomment if you are using auth module
> #
> modparam("auth_db", "calculate_ha1", yes)
> #
> # If you set "calculate_ha1" parameter to yes (which true in this config),
> # uncomment also the following parameter)
> #
> modparam("auth_db", "password_column", "password")
> 
> # -- rr params --
> # add value to ;lr param to make some broken UAs happy
> modparam("rr", "enable_full_lr", 1)
> modparam("acc","log_level",1)
> modparam("acc","radius_flag",1)
> # -------------------------  request routing logic -------------------
> 
> # main routing logic
> 
> 
> 
> route{
> 
> 
> if (method =="INVITE" | method == "BYE")
>  {
>  log(1,"INVITE or BYE\n");
>  setflag(1);
>  };
> if (method=="MESSAGE") {
>  log(1,"MESSAGE\n");
>  setflag(1);
>  };
> if (method=="BYE"){
>  log (1, "BYEd or CANCEL\n");
>  setflag(1);
>  };
> if (method=="CANCEL"){
>  log (1, "BYEe or CANCEL\n");
>  setflag(1);
>  };
> 
>  # initial sanity checks -- messages with
>  # max_forwards==0, or excessively long requests
>  if (!mf_process_maxfwd_header("10")) {
>   sl_send_reply("483","Too Many Hops");
>   break;
>  };
>  if (len_gt( max_len )) {
>   sl_send_reply("513", "Message too big");
>   break;
>  };
> 
>  # we record-route all messages -- to make sure that
>  # subsequent messages will go through our proxy; that's
>  # particularly good if upstream and downstream entities
>  # use different transport protocol
>  record_route();
>  # loose-route processing
>  if (loose_route()) {
>   t_relay();
>   break;
>  };
> 
>  # if the request is for other domain use UsrLoc
>  # (in case, it does not work, use the following command
>  # with proper names and addresses in it)
>  if (uri=~"sip.solaas.com") {
> 
>   if (method=="REGISTER") {
> 
> # Uncomment this if you want to use digest authentication
>    if (!radius_www_authorize("")) {
>     www_challenge("", "0");
>     break;
>    };
> 
>    save("location");
>    break;
>   };
> 
> 
> 
> if (uri=~"^sip:[0-9]*@sip.solaas.com") {
>  setflag(1);
> 
>   log("forwarding to PSTN");
>   prefix("xxxx");
>   t_relay_to_udp("xxx.xxx.xxx.xxx","5060");
>   break;
>   };
> 
> 
> 
>   # native SIP destinations are handled using our USRLOC DB
> /*  if (!lookup("location")) {
>    sl_send_reply("404", "Not Found");
>    break;
>   };
> */
>  };
>  # forward to current uri now; use stateful forwarding; that
>  # works reliably even if we forward from TCP to UDP
>  if (!t_relay()) {
>   sl_reply_error();
>  };
> 
> }
> 
> 
> 
> Jan Janak wrote:
> 
> > Please send me the whole config file.
> >
> >   Jan.
> >
> > On 26-09 12:11, Steven R. Bunin wrote:
> > > Hi all,
> > >
> > > I have successfully gotten radius authentication working and I started getting Radius Start records for accounting but I am not sure what I am doing wrong in regards to getting radius Stop records.
> > >
> > > Below is the area I believe has the most affect on Radius Acccounting from my Log File. Any suggestions would be appreciated and if it would help to see the full Config file I will send it as well.
> > >
> > >
> > >  record_route();
> > >
> > >   if (method=="REGISTER") {
> > >
> > > # Uncomment this if you want to use digest authentication
> > >    if (!radius_www_authorize("")) {
> > >     www_challenge("", "0");
> > >     break;
> > >    };
> > >
> > >    save("location");
> > >    break;
> > >   };
> > >
> > > if (method =="INVITE")
> > >  {
> > >  log(1,"INVITE\n");
> > >  setflag(1);
> > >  };
> > > if (method=="MESSAGE") {
> > >  log(1,"MESSAGE\n");
> > >  setflag(1);
> > >  };
> > > if (method=="BYE"){
> > >  log (1, "BYE or CANCEL\n");
> > >  setflag(1);
> > >  };
> > > if (method=="CANCEL"){
> > >  log (1, "BYE or CANCEL\n");
> > >  setflag(1);
> > >  };
> > >
> > > Thanks in advance,
> > >
> > > Steve
> > >
> > > _______________________________________________
> > > Serusers mailing list
> > > serusers at lists.iptel.org
> > > http://lists.iptel.org/mailman/listinfo/serusers
> 
> --
> Steven R. Bunin - Managing Partner
> 
> SOLAAS LLC
> 10 East 39th Street
> Suite 1125
> New York, NY 10016
> (+001) 212-532-6700
> Cellular: 646-739-7000
> Fax (+001) 212-532-6776
> 
> http://www.solaas.com
> 
> --
> 
> This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this
> e-mail. Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden.
> 
> 




More information about the sr-users mailing list