[Serusers] Urgent help: ser & digest authorization!

[Jan Janak]

The default config script authenticates REGISTER messages only.

  Jan.

On 23-11 14:24, Igor Borisovsky wrote:
> Hi.
> > If you are using the default config, look for the comments:
> >
> > # Uncomment this if you want digest authentication
> >
> > Do as they say.
> 
> I've already uncommented this lines. My config file is:
> #
> # $Id: ser.cfg,v 1.21.2.1 2003/07/30 16:46:18 andrei Exp $
> #
> # simple quick-start config script
> #
> 
> # ----------- global configuration parameters ------------------------
> 
> #debug=3         # debug level (cmd line: -dddddddddd)
> #fork=yes
> #log_stderror=no # (cmd line: -E)
> 
> /* Uncomment these lines to enter debugging mode
> debug=7
> fork=no
> log_stderror=yes
> */
> 
> check_via=no # (cmd. line: -v)
> dns=no           # (cmd. line: -r)
> rev_dns=no      # (cmd. line: -R)
> #port=5060
> #children=4
> fifo="/tmp/ser_fifo"
> 
> # ------------------ module loading ----------------------------------
> 
> # Uncomment this if you want to use SQL database
> loadmodule "/usr/local/lib/ser/modules/mysql.so"
> 
> loadmodule "/usr/local/lib/ser/modules/sl.so"
> loadmodule "/usr/local/lib/ser/modules/tm.so"
> loadmodule "/usr/local/lib/ser/modules/rr.so"
> loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
> loadmodule "/usr/local/lib/ser/modules/usrloc.so"
> loadmodule "/usr/local/lib/ser/modules/registrar.so"
> 
> # Uncomment this if you want digest authentication
> # mysql.so must be loaded !
> loadmodule "/usr/local/lib/ser/modules/auth.so"
> loadmodule "/usr/local/lib/ser/modules/auth_db.so"
> 
> # ----------------- setting module-specific parameters ---------------
> 
> # -- usrloc params --
> 
> #modparam("usrloc", "db_mode",   0)
> 
> # Uncomment this if you want to use SQL database
> # for persistent storage and comment the previous line
> modparam("usrloc", "db_mode", 2)
> 
> # -- auth params --
> # Uncomment if you are using auth module
> #
> modparam("auth_db", "calculate_ha1", yes)
> #
> # If you set "calculate_ha1" parameter to yes (which true in this config),
> # uncomment also the following parameter)
> #
> modparam("auth_db", "password_column", "password")
> 
> # -- rr params --
> # add value to ;lr param to make some broken UAs happy
> modparam("rr", "enable_full_lr", 1)
> 
> # -------------------------  request routing logic -------------------
> 
> # main routing logic
> 
> route{
> 
>  # initial sanity checks -- messages with
>  # max_forwards==0, or excessively long requests
>  if (!mf_process_maxfwd_header("10")) {
>   sl_send_reply("483","Too Many Hops");
>   break;
>  };
>  if (len_gt( max_len )) {
>   sl_send_reply("513", "Message too big");
>   break;
>  };
> 
>  # we record-route all messages -- to make sure that
>  # subsequent messages will go through our proxy; that's
>  # particularly good if upstream and downstream entities
>  # use different transport protocol
>  record_route();
>  # loose-route processing
>  if (loose_route()) {
>   t_relay();
>   break;
>  };
> 
>  # if the request is for other domain use UsrLoc
>  # (in case, it does not work, use the following command
>  # with proper names and addresses in it)
>  if (uri=~"domain.com") {
> 
>   if (method=="REGISTER") {
> 
> # Uncomment this if you want to use digest authentication
>    if (!www_authorize("domain.com", "subscriber")) {
>     www_challenge("domain.com", "0");
>     break;
>    };
> 
>    save("location");
>    break;
>   };
> 
>   # native SIP destinations are handled using our USRLOC DB
>   if (!lookup("location")) {
>    sl_send_reply("404", "Not Found");
>    break;
>   };
>  };
>  # forward to current uri now; use stateful forwarding; that
>  # works reliably even if we forward from TCP to UDP
>  if (!t_relay()) {
>   sl_reply_error();
>  };
> 
> }
> 
> Besides, I tried to use proxy_authorize instead of www_authorize.
> I didn't help.
> By the way, i used the following sip-clients:
> 1. sj-phone(http://www.sjlabs.com/);
> 2. sipps(http://www.nero.com)
> 
> ----- Original Message ----- 
> From: "Andrei Pelinescu-Onciul" <pelinescu-onciul at fokus.fraunhofer.de>
> To: "Igor Borisovsky" <igor at datanaut.com>
> Cc: <serusers at lists.iptel.org>
> Sent: Saturday, November 22, 2003 4:52 PM
> Subject: Re: [Serusers] Urgent help: ser & digest authorization!
> 
> 
> > On Nov 22, 2003 at 15:48, Igor Borisovsky <igor at datanaut.com> wrote:
> > > Hi.
> > > I've installed ser 0.8.11, mysql 4.0. Then i did everything according to
> > > Dan's howto. So ser+mysql bundle working well. I created some users
> using
> > > serctl utility. The my goal is the digest authorization via ser. Does
> anyone
> > > know how can i enable this feature?
> > > Thanks.
> >
> >
> > If you are using the default config, look for the comments:
> >
> > # Uncomment this if you want digest authentication
> >
> > Do as they say.
> >
> >
> > Andrei
> 
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers