[Serusers] ser.cfg for radius

[Jan Janak]

Hello,

the config file seems to be correct, the problem is either in the
configuration of radiusclient library or freeradius server.

  Jan.

On 13-11 15:04, Madan wrote:
> hi
> this is my ser.cfg which i m trying to use with freeradius..but it is nt working,,i.e i can not get my SIPUA registered to make a call ,and i m getting following log for ser
> 
> ---ser log--
> 
> stateless - initializing
> Maxfwd module- initializing
>  0(13376) mod_init(): Database connection opened successfuly
>  0(0) INFO: udp_init: SO_RCVBUF is initially 65535
>  0(0) INFO: udp_init: SO_RCVBUF is finally 262142
>  2(13378) INFO: fifo process starting: 13378
>  2(13378) SER: open_uac_fifo: fifo server up at /tmp/ser_fifo...
>  0(13376) REGISTER: Authenticating user
>  0(13376) REGISTER: challenging user
>  0(13376) REGISTER: Authenticating user
>  0(13376) REGISTER: challenging user
>  0(13376) REGISTER: Authenticating user
>  0(13376) REGISTER: challenging user
>  0(13376) REGISTER: Authenticating user
>  0(13376) REGISTER: challenging user
>  0(13376) REGISTER: Authenticating user
>  0(13376) REGISTER: challenging user
>  0(13376) REGISTER: Authenticating user
>  0(13376) REGISTER: challenging user
> 
> 
> 
> 
> ---ser.cfg--
> 
> #
> # ----------- global configuration parameters ------------------------
> debug=3         # debug level (cmd line: -dddddddddd)
> fork=no
> log_stderror=yes # (cmd line: -E)
> listen=202.71.135.219
> /* Uncomment these lines to enter debugging mode 
> debug=7
> fork=no
> log_stderror=yes
> */
> 
> check_via=no # (cmd. line: -v)
> dns=no           # (cmd. line: -r)
> rev_dns=no      # (cmd. line: -R)
> port=5060
> children=4
> fifo="/tmp/ser_fifo"
> 
> # ------------------ module loading ----------------------------------
> 
> # Uncomment this if you want to use SQL database
> loadmodule "/usr/local/lib/ser/modules/mysql.so"
> loadmodule "/usr/local/lib/ser/modules/sl.so"
> loadmodule "/usr/local/lib/ser/modules/tm.so"
> loadmodule "/usr/local/lib/ser/modules/rr.so"
> loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
> loadmodule "/usr/local/lib/ser/modules/usrloc.so"
> loadmodule "/usr/local/lib/ser/modules/registrar.so"
> 
> # Uncomment this if you want digest authentication
> # mysql.so must be loaded !
> loadmodule "/usr/local/lib/ser/modules/auth.so"
> #loadmodule "/usr/local/lib/ser/modules/auth_db.so"
> #loadmodule "/usr/local/lib/ser/modules/acc.so"
> loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
> #loadmodule "/usr/local/lib/ser/modules/uri_radius.so"
> 
> 
> # ----------------- setting module-specific parameters ---------------
> 
> # -- usrloc params --
> 
> modparam("usrloc", "db_mode",   2)
> modparam("auth_radius", "radius_config","/usr/local/etc/radiusclient/radiusclient.conf")
> #modparam("uri_radius", "radius_config","/usr/local/etc/radiusclient/radiusclient.conf")
> modparam("auth_radius", "service_type", 15)
> 
> # -- rr params --
> # add value to ;lr param to make some broken UAs happy
> modparam("rr", "enable_full_lr", 1)
> #modparam("acc", "log_level", 1)
> #modparam("acc", "radius_flag", 1)
> 
> # -------------------------  request routing logic -------------------
> alias=sip.net4india.com
> 
> # main routing logic
> 
> route{
> # initial sanity checks -- messages with
>         # max_forwards==0, or excessively long requests
>         if (!mf_process_maxfwd_header("10")) {
>                 sl_send_reply("483","Too Many Hops");
>                 break;
>         };
>         if (len_gt( max_len )) {
>                 sl_send_reply("513", "Message too big");
>                 break;
>         };
> 
> 
> 
> # we record-route all messages -- to make sure that
> # subsequent messages will go through our proxy; that's
> # particularly good if upstream and downstream entities
> # use different transport protocol
> record_route(); 
> # loose-route processing
> if (loose_route()) {
> t_relay();
> break;
> };
> 
> # if the request is for other domain use UsrLoc
>         # (in case, it does not work, use the following command
>         # with proper names and addresses in it)
> 
>         if (method=="REGISTER") {
> 
>                 log(1, "REGISTER: Authenticating user\n");
> 
>                 if (!radius_www_authorize("")) {
>                         log(1, "REGISTER: challenging user\n");
>                         www_challenge("", "0");
>                         break;
>                 };
>                 save("location");
>                 break;
>         };
> 
> 
>         if (method=="INVITE") {
> 
>                 log(1, "INVITE\n");
>                 setflag(1); /* set for accounting (the same value as in
> log_flag!) */
>         };
> 
>         if (method=="MESSAGE") {
>                 log(1, "MESSAGE\n");
>                 setflag(1); /* set for accounting (the same value as in
> log_flag!) */
>         };
> 
>         if (method=="BYE" || method=="CANCEL") {
>                 log (1, "BYE or CANCEL\n");
>                 setflag(1);
>         };
> 
>         # native SIP destinations are handled using our USRLOC DB
>         if (!lookup("location")) {
>                 sl_send_reply("404", "Not Found");
>                 break;
>         };
>         if (!t_relay()) {
>                 sl_reply_error();
>                 break;
>         };
> 
> 
> }
> 
>  
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers