[Serusers] ser.cfg for radius

[Madan]

hi
this is my ser.cfg which i m trying to use with freeradius..but it is nt working,,i.e i can not get my SIPUA registered to make a call ,and i m getting following log for ser

---ser log--

stateless - initializing
Maxfwd module- initializing
 0(13376) mod_init(): Database connection opened successfuly
 0(0) INFO: udp_init: SO_RCVBUF is initially 65535
 0(0) INFO: udp_init: SO_RCVBUF is finally 262142
 2(13378) INFO: fifo process starting: 13378
 2(13378) SER: open_uac_fifo: fifo server up at /tmp/ser_fifo...
 0(13376) REGISTER: Authenticating user
 0(13376) REGISTER: challenging user
 0(13376) REGISTER: Authenticating user
 0(13376) REGISTER: challenging user
 0(13376) REGISTER: Authenticating user
 0(13376) REGISTER: challenging user
 0(13376) REGISTER: Authenticating user
 0(13376) REGISTER: challenging user
 0(13376) REGISTER: Authenticating user
 0(13376) REGISTER: challenging user
 0(13376) REGISTER: Authenticating user
 0(13376) REGISTER: challenging user




---ser.cfg--

#
# ----------- global configuration parameters ------------------------
debug=3         # debug level (cmd line: -dddddddddd)
fork=no
log_stderror=yes # (cmd line: -E)
listen=202.71.135.219
/* Uncomment these lines to enter debugging mode 
debug=7
fork=no
log_stderror=yes
*/

check_via=no # (cmd. line: -v)
dns=no           # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
port=5060
children=4
fifo="/tmp/ser_fifo"

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database
loadmodule "/usr/local/lib/ser/modules/mysql.so"
loadmodule "/usr/local/lib/ser/modules/sl.so"
loadmodule "/usr/local/lib/ser/modules/tm.so"
loadmodule "/usr/local/lib/ser/modules/rr.so"
loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
loadmodule "/usr/local/lib/ser/modules/usrloc.so"
loadmodule "/usr/local/lib/ser/modules/registrar.so"

# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "/usr/local/lib/ser/modules/auth.so"
#loadmodule "/usr/local/lib/ser/modules/auth_db.so"
#loadmodule "/usr/local/lib/ser/modules/acc.so"
loadmodule "/usr/local/lib/ser/modules/auth_radius.so"
#loadmodule "/usr/local/lib/ser/modules/uri_radius.so"


# ----------------- setting module-specific parameters ---------------

# -- usrloc params --

modparam("usrloc", "db_mode",   2)
modparam("auth_radius", "radius_config","/usr/local/etc/radiusclient/radiusclient.conf")
#modparam("uri_radius", "radius_config","/usr/local/etc/radiusclient/radiusclient.conf")
modparam("auth_radius", "service_type", 15)

# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
#modparam("acc", "log_level", 1)
#modparam("acc", "radius_flag", 1)

# -------------------------  request routing logic -------------------
alias=sip.net4india.com

# main routing logic

route{
# initial sanity checks -- messages with
        # max_forwards==0, or excessively long requests
        if (!mf_process_maxfwd_header("10")) {
                sl_send_reply("483","Too Many Hops");
                break;
        };
        if (len_gt( max_len )) {
                sl_send_reply("513", "Message too big");
                break;
        };



# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy; that's
# particularly good if upstream and downstream entities
# use different transport protocol
record_route(); 
# loose-route processing
if (loose_route()) {
t_relay();
break;
};

# if the request is for other domain use UsrLoc
        # (in case, it does not work, use the following command
        # with proper names and addresses in it)

        if (method=="REGISTER") {

                log(1, "REGISTER: Authenticating user\n");

                if (!radius_www_authorize("")) {
                        log(1, "REGISTER: challenging user\n");
                        www_challenge("", "0");
                        break;
                };
                save("location");
                break;
        };


        if (method=="INVITE") {

                log(1, "INVITE\n");
                setflag(1); /* set for accounting (the same value as in
log_flag!) */
        };

        if (method=="MESSAGE") {
                log(1, "MESSAGE\n");
                setflag(1); /* set for accounting (the same value as in
log_flag!) */
        };

        if (method=="BYE" || method=="CANCEL") {
                log (1, "BYE or CANCEL\n");
                setflag(1);
        };

        # native SIP destinations are handled using our USRLOC DB
        if (!lookup("location")) {
                sl_send_reply("404", "Not Found");
                break;
        };
        if (!t_relay()) {
                sl_reply_error();
                break;
        };


}

 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20031113/a7446b99/attachment.htm>