[Serusers] gateway config help!

[seb.peterson at internet.lu]

Hi,
I'm doing a few tests to try SER. 
I use a simple configuration:
 -two Cisco ip phones
 -one Cisco 1760 Voice gateway with ISDN interfaces.

Calling between the ip phones works, but going through
the Voice Gateway is something else... I don't really 
understand how to edit the config file, and I suppose
their's a simple way. Here's how I tried.

I added these lines to the default config:
if (uri=~"^sip:452564 at 10.1.1.22") {
                t_relay_to("10.1.1.240","5060");
                break;
        };
And I call always teh same number 452564. 10.1.1.240 being 
my gateway, and 10.1.1.22 the SIP proxy server.
An extract of the debbuging info:
...
 6(13970) SIP Request:
 6(13970)  method:  <ACK>
 6(13970)  uri:     <sip:452564 at 10.1.1.22>
 6(13970)  version: <SIP/2.0>
 6(13970) parse_headers: flags=1
...
 6(13970) DEBUG: add_param: tag=d907c037823644515dfe0ede38ca9976.1dfc
 6(13970) end of header reached, state=29
 6(13970) DEBUG: get_hdr_field: <To> [66]; uri=[sip:452564 at 10.1.1.22] 
 6(13970) DEBUG: to body [<sip:452564 at 10.1.1.22>]
 6(13970) DEBUG: sl_filter_ACK : local ACK found -> dropping it! 
 6(13970) error:...
..


If you see something big, please let me know.
THanks.

Sebastien Peterson
Luxembourg.


route{
        # initial sanity checks -- messages with
        # max_forwars==0, or excessively long requests
        if (!mf_process_maxfwd_header("10")) {
                sl_send_reply("483","Too Many Hops");
                break;
        };
        if (len_gt( max_len )) {
                sl_send_reply("513", "Message too big");
                break;
        };
                  
        # Do strict routing if pre-loaded route headers present
        rewriteFromRoute();
        
                
        # if the request is for other domain use UsrLoc
        # (in case, it does not work, use the following command
        # with proper names and addresses in it)
        if (uri==myself) {
          
                if (method=="REGISTER") {

# Uncomment this if you want to use digest authentication
#                       if (!www_authorize("iptel.org", "subscriber")) {
#                               www_challenge("iptel.org", "0");
#                               break;
#                       };
 
                        save("location");
                        break;
                };
        
                
                # native SIP destinations are handled using our USRLOC DB
                if (!lookup("location")) {
                        sl_send_reply("404", "Not Found");
                        break;
                };
        };
        
        if (uri=~"^sip:452564 at 10.1.1.22") {
                t_relay_to("10.1.1.240","5060");
                break;
        };


        # forward to current uri now
        if (!t_relay()) {
                sl_reply_error();
        };
 
}