[Serusers] routing question

[Jiri Kuthan]

Steve,

The fragment alone looks ok. It is hard to tell what script error
you have from such a small script fragment and without seeing the 
messages. We would need both to judge what the problem is.

-Jiri

At 07:54 PM 6/17/2003, Steve Blair wrote:

>Hello:
>
>  I have some Cisco phones registered to SER running on
>FreeBSD 4.7. Users of these phones want to dial a telephone
>number and have the call correctly routed out to the PSTN
>via a Cisco gateway on the network. The users of course
>only key-in a telephone number. No domain name or
>IP address. I thought the following code would correctly
>append the IP address and port of the gateway to their
>telephone number so the call could get routed correctly. This
>is not working. Instead either the IP address of the calling
>phone or the domain name for my domain is appended. Any
>thought on how to correct this would be appreciated.
>
>      # check if it's about PSTN destinations through our gateway;
>       if (uri=~"sip:9{10}")
>       {
>               route(4);
>               break;
>       };
>
>       route[4]
>                 .....
>                some account statements followed by
>                 .....            
>                rewritehostport("ip-address-of-pstn-gateway:5060");
>
>
>Thanks,Steve
>
>_______________________________________________
>Serusers mailing list
>serusers at lists.iptel.org
>http://lists.iptel.org/mailman/listinfo/serusers

--
Jiri Kuthan            http://iptel.org/~jiri/