[Serusers] nathelper updated to support RTP proxy

[Maxim Sobolev]

Oh, sorry, I've misunderstood your problem. What kind of device UA1 is? 
Can you please try the same with ATAs on both ends?

-Maxim

Ricardo Villa wrote:

> Hi Maxim,
> 
> Sorry but I don't understand what you mean.  Ser and RTP Proxy are on a
> machine with  IP Address=192.168.1.111.  The WAN interface of the NAT Router
> is 192.168.1.1.   What exactly should I do?
> 
> UA1---SER(192.168.1.111)---(192.168.1.1)NAT(192.168.0.1)----ATA186(192.168.0
> .15)
> 
> 
> Thanks,
> Ricardo
> 
> 
> ----- Original Message -----
> From: "Maxim Sobolev" <sobomax at portaone.com>
> To: "Ricardo Villa" <ricvil at epm.net.co>
> Cc: <serusers at lists.iptel.org>; <serdev at lists.iptel.org>
> Sent: Wednesday, July 09, 2003 7:18 PM
> Subject: Re: [Serusers] nathelper updated to support RTP proxy
> 
> 
> 
>>Try to bind both ser and rtpproxy to the IP address of "WAN" interface -
>>192.168.0.1 and let me know if it helps or not.
>>
>>-Maxim
>>
>>Ricardo Villa wrote:
>>
>>
>>>Hi Maxim,
>>>
>>>I have tested on 0.8.12dev-t10 installed on RedHat 7.3.
>>>
>>>The results are mixed.  Only about 40% of the calls have audio even
> 
> though
> 
>>>the SDP is rewritten properly.
>>>
>>>My test setup is like this:
>>>
>>>UA1(192.168.1.10) --
>>>SER(192.168.1.111)---(192.168.1.1)NAT(192.168.0.1)--ATA186(192.168.0.15)
>>>
>>>I have included the "-f" output from the rtpproxy plus 4 ngrep files.
>>>
>>>1.  success_from_internet.txt --> good call from UA1 to ATA186
>>>2.  fail_from_internet.txt ---> no audio call from UA1 to ATA186
>>>3.  success_from_nat.txt ----> good call from ATA186 to UA1
>>>4.  fail_from_nat.txt  ---> no audio call from ATA186 to UA1
>>>
>>>Please let me know how else we can troubleshoot this.
>>>
>>>Thanks,
>>>Ricardo
>>>
>>>
>>>
>>>----- Original Message -----
>>>From: "Maxim Sobolev" <sobomax at portaone.com>
>>>To: <serusers at lists.iptel.org>
>>>Cc: <serdev at lists.iptel.org>
>>>Sent: Sunday, July 06, 2003 12:16 PM
>>>Subject: [Serusers] nathelper updated to support RTP proxy
>>>
>>>
>>>
>>>
>>>>Folks,
>>>>
>>>>Today I've updated nathelper module to support RTP proxy. It would
>>>>be nice if somebody can test it on platforms other than FreeBSD,
>>>>because I don't have an access to such boxes right now. The RTP
>>>>proxy itself can be downloaded from:
>>>>
>>>>https://demo.portaone.com/~sobomax/PortaSIP/rtpproxy/
>>>>
>>>>Any feedback is greatly appreciated.
>>>>
>>>>-Maxim
>>>>P.S. I've committed it to the HEAD, those with 0.8.11 prerelease
>>>>please apply the following patch:
>>>>
>>>>https://demo.portaone.com/~sobomax/nathelper.diff
>>>>
>>>>_______________________________________________
>>>>Serusers mailing list
>>>>serusers at lists.iptel.org
>>>>http://lists.iptel.org/mailman/listinfo/serusers
>>>>
>>>>
>>>>
>>>>------------------------------------------------------------------------
>>>>
>>>>_______________________________________________
>>>>Serusers mailing list
>>>>serusers at lists.iptel.org
>>>>http://lists.iptel.org/mailman/listinfo/serusers
>>
>>
>>
> 
> 
> 
>