[Serusers] 483

[jerk face]

I'm adding the output from ngrep when my client tries
to register.  These packets are constantly looped.
Note the following changes to my logs:
67.70.NAT.IP -> the IP address of the NAT server in
which the client is connected to
67.70.SER.IP -> the IP address of my SER server
demosip.mydomain.com -> the DNS name of my server

U 67.70.NAT.IP:2862 -> 67.70.SER.IP:5060
  REGISTER sip:demosip.mydomain.com SIP/2.0..Via:
SIP/2.0/UDP 67.70.NAT.IP:5
  060..From: hsimpson
<sip:hsimpson at demosip.mydomain.com>;tag=1679191039..To:
   hsimpson
<sip:hsimpson at demosip.mydomain.com>..Call-ID:
1978684008 at 192.168.
  10.16..CSeq: 1 REGISTER..Contact:
<sip:hsimpson at 67.70.NAT.IP:5060>..max-fo
  rwards: 70..expires: 60..Content-Length: 0....
#
U 67.70.SER.IP:5060 -> 67.70.NAT.IP:5060
  SIP/2.0 200 OK..Via: SIP/2.0/UDP
67.70.NAT.IP:5060..From: hsimpson
<sip:hsimpson at demosip.mydomain.com>;tag=1679191039..To:
hsimpson
<sip:hsimpson at demosip.mydomain.com>;tag=b27e1a1d33761e85846fc98f5f3a7e58.05da..Call-ID:
1978
  684008 at 192.168.10.16..CSeq: 1 REGISTER..Contact:
<sip:hsimpson at 67.70.231.21
  8:5060>;q=0.00;expires=60..Server: Sip EXpress
router (0.8.12 (i386/linux))
  ..Content-Length: 0..Warning: 392 67.70.USER.IP:5060
"Noisy feedback tells:
    pid=8877 req_src_ip=67.70.NAT.IP req_src_port=2862
in_uri=sip:demopbx.te
  lantek.com out_uri=sip:demosip.mydomain.com
via_cnt==1"....
###
I 67.70.NAT.IP -> 67.70.SER.IP 3:3
  ....E..d.. at .@..6CF..CF.......P..SIP/2.0 200 OK..Via:
SIP/2.0/UDP 67.70.231.
  218:5060..From: hsimpson
<sip:hsimpson at demosip.mydomain.com>;tag=1679191039



--- jerk face <jerkface2098 at yahoo.com> wrote:
> Here's the scenario:
> As of now, I can only get users to register with my
> SER if I don't use database authentication.  These
> users must also have a static IP address to
> register.
> 
> I am now trying to get a client to register with SER
> from behind a NAT.  I am using a STUN server address
> to help with the NAT situation.  When I do this I
> get
> a 483 message.
> 
> >From looking at similar posts, the problem is
> usually
> caused by setting uri=="some.domain.com"
> I don't have this configuration; in ser.cfg I have
> the
> following:
> 
> alias="my.domain.com"
> 
> if(uri==myself)
> 
> Also, I am running ser-0.8.12 if that makes any
> difference.
> 
> Does anybody know why I am getting 483 error
> messages?
> 
> Any help is always appreciated.
> 
> __________________________________
> Do you Yahoo!?
> New Yahoo! Photos - easier uploading and sharing.
> http://photos.yahoo.com/
> 
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers


__________________________________
Do you Yahoo!?
New Yahoo! Photos - easier uploading and sharing.
http://photos.yahoo.com/