[Serusers] BYE Message Problem

Andres andres at telesip.net
Thu Dec 18 21:25:14 CET 2003


On Thursday 18 December 2003 15:11, Darren Sessions wrote:
> Sipura Firmware is 1.0.20
>
> We are already in talks with Sipura about this issue as we found a bug for
> them yesterday. It appears though based on the Etheral traces and ngrep
> that the Sipura is sending the BYE messages - but SER is not forwarding
> them along.
Can you post all the messages here(INVITE...to ...BYE)?  Otherwise it is hard 
to guess where the problem might be.  I'm sure Jiri or Jan can spot the error 
right away.  

>
> We are using Ser 8.12 on a Sun Ultra 60 - and as I said before, all other
> instances work flawlessly.
>
> Thanks,
>
>  - Darren
>
> -----Original Message-----
> From: Andres [mailto:andres at telesip.net]
> Sent: Thursday, December 18, 2003 2:58 PM
> To: Darren Sessions; serusers at lists.iptel.org
> Subject: Re: [Serusers] BYE Message Problem
>
> On Thursday 18 December 2003 14:50, Darren Sessions wrote:
> > We also have a problem with BYE's not being sent from an on-net call
> > (sipura to sipura).
>
> What firmware version are you using?  We have been testing the SPA2000 for
> about 3 weeks now and have not seen this issue.
>
> > -----Original Message-----
> > From: Darren Sessions
> > Sent: Thursday, December 18, 2003 2:32 PM
> > To: 'serusers at lists.iptel.org'
> > Subject: RE: Serusers Digest, Vol 8, Issue 16
> > Importance: High
> >
> >
> > Situation:
> >
> > Endpoint is called Party (Sipura SPA2000)
> >
> > Calling Party is routed through from a TDM call and VoIP'd by Cisco 3640
> > router then sent to SER.
> >
> > Endpoint receives call - everything works. When the Sipura hangs up the
> > call, it sends a BYE to ser - but ser does not send the BYE to the router
> > to disconnect the TDM channel.
> >
> > All other situations result in a completed call with channels released on
> > the router just fine.
> >
> > After further inspection - we noticed that when the Sipura hangs up and
> > send the BYE to SER, SER responds with this:
> >
> >
> > SIP/2.0 481 Call/Transaction Does Not Exist
> > Via: SIP/2.0/UDP 11.11.111.155:5060;branch=z9hG4bK-b76fe29f
> > From: <sip:8646783182 at 22.22.222.154>;tag=bc5a80577e3d5642
> > To: <sip:8644679887 at 33.33.333.157>;tag=322BCA98-25A3
> > Call-ID: F429FDCE-30B011D8-BA0EDB9C-52307829 at 33.33.333.157
> > CSeq: 101 BYE
> > Contact: <sip:8644679887 at 44.44.444.148>
> > Server: Sip EXpress router (0.8.12 (i386/linux))
> > Content-Length: 0
> > Warning: 392 44.44.444.148:5060 "Noisy feedback tells:  pid=20033
> > req_src_ip=22.22.222.154 req_src_port=5060
> > in_uri=sip:8644679887 at 44.44.444.148:5060
> > out_uri=sip:8644679887 at 44.44.444.148:5060 via_cnt==0"
> >
> >
> > Any ideas?
> >
> > Thanks,
> >
> >  - Darren
> >
> > _______________________________________________
> > Serusers mailing list
> > serusers at lists.iptel.org
> > http://lists.iptel.org/mailman/listinfo/serusers




More information about the sr-users mailing list