[Serusers] Debug information
Rick Gocher
rgocher at coptalk.com
Mon Dec 15 18:20:26 CET 2003
Hi again,
I have only UID0 and UID1 and GKorProxy and use Sip, nothing in
gateway. I'm not sure where to set my domain in ser. My hostname in
/etc/sysconfig/network is set to sip.coptalk.com. Should I change it just
to sip? I have several aliases I have placed trying to get things working
in ser.cfg,
alias="coptalk.com"
alias="sip"
alias="sip.coptalk.com
Besides that the only other place which has my domain in ser.cfg is the
if (uri==myself) {
if (method=="REGISTER") {
# digest authentication
log(1,"request for registration");
# if (!www_authorize("coptalk.com", "subscriber")) {
# www_challenge("coptalk.com", "0");
# break;
# };
save("location");
break;
};
As you see I have commented out the www_authorize because if I don't Xten
lite cannot login. It and the ata just get the 401 unauthorized
error. Currently, I can dial out to a number, immediately the display on
the xten phone says error 404 user not found and just plays fast
busy. Then phone I was dialing out to, rings and if you pick it up there
is nothing there. I have to use the Xten for testing because with sip reg
on, the ata does not even get a dial tone. :p
I would like to think, with the call actually being passed to my gateway
and a return SIP/2.0 200 OK..Via: SIP/2.0/UDP, I must be getting close...
Thanks again for all your help,
Rick
At 12:45 PM 12/15/2003 +0100, Jesus Rodriguez wrote:
>On Fri, 12 Dec 2003, Rick Gocher wrote:
>
>Hello,
>
> > I'm not sure how to change the way the ata sends it credentials. I have my
> > name Rick listed for the UID:0 and UID:1 and the password for that user. I
> > filled in the gateway as both an IP and FQDN with neither changing the
> > actual problem. I tried placing @coptalk.com and @sip.coptalk.com behind
> > my UID: i.e. Rick at sip.coptalk.com but then the ngrep reports Unauthorized.
> > etc. sip:Rick at sip.coptalk.com@sip.coptalk.com.... If I can't change the
> > ata perhaps I can change the way ser challenges?
>
>With Cisco ATA you don't need the gateway field. You have to fill:
>
>UID0
>PWD0
>GkOrProxy
>UseSIP
>
>(and others, but these are required).
>
>For example, you have:
>
>UID0 = Rick
>PWD0 = password
>GkOrProxy = sip.coptalk.com
>UseSIP = 1
>
>Then, in SER you have to set you domain as sip.coptalk.com and NOT
>coptalk.com. You MUST use the same domain in SER and ATA. If you set GkOrPRoxy
>in ATA as coptalk.com then SER must challenge coptalk.com.
>
>Regards.
>
>
>
>
> > At 12:42 AM 12/12/2003 +0100, Jesus Rodriguez wrote:
> > >On Thu, 11 Dec 2003, Rick Gocher wrote:
> > >
> > >Hello,
> > >
> > > > Just me, still trying to get authentication working... I have found by
> > > > placing a high debug value and starting ser I received some errors
> I never
> > > > saw before as I had no ata box plugged in during the startup. I'm
> not sure
> > > > if this points to why I can't authenticate. When the output says
> there is
> > > > no routing headers, is that the fault of my ATA?
> > >
> > >I think was Jan who gave you the answer. SER is trying to challenge with
> > >domain sip.coptalk.com but you are sending credentials as coptalk.com
> > >
> > >
> > >
> > >
> > >
> > > > Dec 11 16:07:19 sip ser: 8(4583) SIP Request:
> > > > Dec 11 16:07:19 sip ser: 8(4583) method: <REGISTER>
> > > > Dec 11 16:07:19 sip ser: 8(4583) uri: <sip:sip.coptalk.com>
> > > > Dec 11 16:07:19 sip ser: 8(4583) version: <SIP/2.0>
> > > > Dec 11 16:07:19 sip ser: 8(4583) parse_headers: flags=1
> > > > Dec 11 16:07:19 sip ser: 8(4583) end of header reached, state=5
> > > > Dec 11 16:07:19 sip ser: 8(4583) parse_headers: Via found, flags=1
> > > > Dec 11 16:07:19 sip ser: 8(4583) parse_headers: this is the first via
> > > > Dec 11 16:07:19 sip ser: 8(4583) After parse_msg...
> > > > Dec 11 16:07:19 sip ser: 8(4583) preparing to run routing scripts...
> > > > Dec 11 16:07:19 sip ser: 8(4583) entering main route 8(4583) DEBUG :
> > > > is_maxfwd_present: searching for max_forwards header
> > > > Dec 11 16:07:19 sip ser: 8(4583) parse_headers: flags=128
> > > > Dec 11 16:07:19 sip ser: 8(4583) end of header reached, state=8
> > > > Dec 11 16:07:19 sip ser: 8(4583) DEBUG: get_hdr_field: <To> [27];
> > > > uri=[sip:Rick at sip.coptalk.com]
> > > > Dec 11 16:07:19 sip ser:
> > > > Dec 11 16:07:19 sip ser: ]
> > > > Dec 11 16:07:19 sip ser: 8(4583) get_hdr_field: cseq <CSeq>: <7>
> > > <REGISTER>
> > > > Dec 11 16:07:19 sip ser: 8(4583) DEBUG: get_hdr_body :
> content_length=0
> > > > Dec 11 16:07:19 sip ser: 8(4583) found end of header
> > > > Dec 11 16:07:19 sip ser: 8(4583) DEBUG: is_maxfwd_present:
> max_forwards
> > > > header not found!
> > > > Dec 11 16:07:19 sip ser: 8(4583) DEBUG: add_param: tag=1804086518
> > > > Dec 11 16:07:19 sip ser: 8(4583) end of header reached, state=29
> > > > Dec 11 16:07:19 sip ser: 8(4583) parse_headers: flags=256
> > > > Dec 11 16:07:19 sip ser: 8(4583) find_first_route(): No Route headers
> > > found
> > > > Dec 11 16:07:19 sip ser: 8(4583) loose_route(): There is no Route HF
> > > > Dec 11 16:07:19 sip ser: 8(4583) check_self - checking if
> host==us: 16==9
> > > > && [sip.coptalk.com] == [127.0.0.1]
> > > > Dec 11 16:07:19 sip ser: 8(4583) check_self - checking if port 5060
> > > > matches port 5060
> > > > Dec 11 16:07:19 sip ser: 8(4583) check_self - checking if
> host==us: 16==13
> > > > && [sip.coptalk.com] == [64.189.165.205]
> > > > Dec 11 16:07:19 sip ser: 8(4583) check_self - checking if port 5060
> > > > matches port 5060
> > > > Dec 11 16:07:19 sip ser: 8(4583) request for registration 8(4583)
> > > > check_nonce(): comparing [3fd907c2aa2d6c72cd666f9109e45155055b2d36] and
> > > > [3fd907c23a57f75133a55828041f2c9ee7b081c2]
> > > > Dec 11 16:07:19 sip ser: 8(4583) pre_auth(): Invalid nonce value
> received,
> > > > very suspicious !
> > > > Dec 11 16:07:19 sip ser:
> > > > Dec 11 16:07:19 sip ser: '
> > > > Dec 11 16:07:19 sip ser: 8(4583) parse_headers: flags=-1
> > > > Dec 11 16:07:19 sip ser: 8(4583) check_via_address(64.189.165.206,
> > > > 64.189.165.206, 0)
> > > > Dec 11 16:07:19 sip ser: 8(4583) receive_msg: cleaning up
> > > > Dec 11 16:07:19 sip ser: 6(4581) SIP Request:
> > > > Dec 11 16:07:19 sip ser: 6(4581) method: <REGISTER>
> > > > Dec 11 16:07:19 sip ser: 6(4581) uri: <sip:sip.coptalk.com>
> > > > Dec 11 16:07:19 sip ser: 6(4581) version: <SIP/2.0>
> > > > Dec 11 16:07:19 sip ser: 6(4581) parse_headers: flags=1
> > > > Dec 11 16:07:19 sip ser: 6(4581) end of header reached, state=5
> > > > Dec 11 16:07:19 sip ser: 6(4581) parse_headers: Via found, flags=1
> > > > Dec 11 16:07:19 sip ser: 6(4581) parse_headers: this is the first via
> > > > Dec 11 16:07:19 sip ser: 6(4581) After parse_msg...
> > > > Dec 11 16:07:19 sip ser: 6(4581) preparing to run routing scripts...
> > > > Dec 11 16:07:19 sip ser: 6(4581) entering main route 6(4581) DEBUG :
> > > > is_maxfwd_present: searching for max_forwards header
> > > > Dec 11 16:07:19 sip ser: 6(4581) parse_headers: flags=128
> > > > Dec 11 16:07:19 sip ser: 6(4581) end of header reached, state=8
> > > > Dec 11 16:07:19 sip ser: 6(4581) DEBUG: get_hdr_field: <To> [27];
> > > > uri=[sip:Rick at sip.coptalk.com]
> > > > Dec 11 16:07:19 sip ser:
> > > > Dec 11 16:07:19 sip ser: ]
> > > > Dec 11 16:07:19 sip ser: 6(4581) get_hdr_field: cseq <CSeq>: <8>
> > > <REGISTER>
> > > > Dec 11 16:07:19 sip ser: 6(4581) DEBUG: get_hdr_body :
> content_length=0
> > > > Dec 11 16:07:19 sip ser: 6(4581) found end of header
> > > > Dec 11 16:07:19 sip ser: 6(4581) DEBUG: is_maxfwd_present:
> max_forwards
> > > > header not found!
> > > > Dec 11 16:07:19 sip ser: 6(4581) DEBUG: add_param: tag=1804086518
> > > > Dec 11 16:07:19 sip ser: 6(4581) end of header reached, state=29
> > > > Dec 11 16:07:19 sip ser: 6(4581) parse_headers: flags=256
> > > > Dec 11 16:07:19 sip ser: 6(4581) find_first_route(): No Route headers
> > > found
> > > > Dec 11 16:07:19 sip ser: 6(4581) loose_route(): There is no Route HF
> > > > Dec 11 16:07:19 sip ser: 6(4581) check_self - checking if
> host==us: 16==9
> > > > && [sip.coptalk.com] == [127.0.0.1]
> > > > Dec 11 16:07:19 sip ser: 6(4581) check_self - checking if port 5060
> > > > matches port 5060
> > > > Dec 11 16:07:19 sip ser: 6(4581) check_self - checking if
> host==us: 16==13
> > > > && [sip.coptalk.com] == [64.189.165.205]
> > > > Dec 11 16:07:19 sip ser: 6(4581) check_self - checking if port 5060
> > > > matches port 5060
> > > > Dec 11 16:07:20 sip ser: 6(4581) request for registration 6(4581)
> > > > check_nonce(): comparing [3fd907e3929aea9bad25fbd47b3ea062d9215574] and
> > > > [3fd907e3929aea9bad25fbd47b3ea062d9215574]
> > > > Dec 11 16:07:20 sip ser: 6(4581) get_ha1(): no result for user
> > > > 'Rick at coptalk.com'
> > > > Dec 11 16:07:20 sip ser:
> > > > Dec 11 16:07:20 sip ser: '
> > > > Dec 11 16:07:20 sip ser: 6(4581) parse_headers: flags=-1
> > > > Dec 11 16:07:20 sip ser: 6(4581) check_via_address(64.189.165.206,
> > > > 64.189.165.206, 0)
> > > > Dec 11 16:07:20 sip ser: 6(4581) receive_msg: cleaning up
> > > >
> > > > _______________________________________________
> > > > Serusers mailing list
> > > > serusers at lists.iptel.org
> > > > http://lists.iptel.org/mailman/listinfo/serusers
> > > >
> > >
> > >
> > >Saludos
> > >JesusR.
> > >
> > >-------------------------------
> > >Jesus Rodriguez
> > >VozTelecom Sistemas, S.L.
> > >jesusr at voztele.com
> > >http://www.voztele.com
> > >Tel. 902360305
> > >-------------------------------
> >
>
>
>Saludos
>JesusR.
>
>-------------------------------
>Jesus Rodriguez
>VozTelecom Sistemas, S.L.
>jesusr at voztele.com
>http://www.voztele.com
>Tel. 902360305
>-------------------------------
More information about the sr-users
mailing list