[Serusers] Debug information

Jesus Rodriguez jesusr at voztele.com
Mon Dec 15 12:45:56 CET 2003 

On Fri, 12 Dec 2003, Rick Gocher wrote:

Hello,

> I'm not sure how to change the way the ata sends it credentials.  I have my
> name Rick listed for the UID:0 and UID:1 and the password for that user.  I
> filled in the gateway as both an IP and FQDN with neither changing the
> actual problem.  I tried placing @coptalk.com and @sip.coptalk.com behind
> my UID: i.e. Rick at sip.coptalk.com but then the ngrep reports Unauthorized.
> etc. sip:Rick at sip.coptalk.com@sip.coptalk.com....  If I can't change the
> ata perhaps I can change the way ser challenges?

With Cisco ATA you don't need the gateway field. You have to fill:

UID0
PWD0
GkOrProxy
UseSIP

(and others, but these are required).

For example, you have:

UID0 = Rick
PWD0 = password
GkOrProxy = sip.coptalk.com
UseSIP = 1

Then, in SER you have to set you domain as sip.coptalk.com and NOT
coptalk.com. You MUST use the same domain in SER and ATA. If you set GkOrPRoxy
in ATA as coptalk.com then SER must challenge coptalk.com.

Regards.




> At 12:42 AM 12/12/2003 +0100, Jesus Rodriguez wrote:
> >On Thu, 11 Dec 2003, Rick Gocher wrote:
> >
> >Hello,
> >
> > > Just me, still trying to get authentication working...  I have found by
> > > placing a high debug value and starting ser I received some errors I never
> > > saw before as I had no ata box plugged in during the startup.  I'm not sure
> > > if this points to why I can't authenticate.  When the output says there is
> > > no routing headers, is that the fault of my ATA?
> >
> >I think was Jan who gave you the answer. SER is trying to challenge with
> >domain sip.coptalk.com but you are sending credentials as coptalk.com
> >
> >
> >
> >
> >
> > > Dec 11 16:07:19 sip ser:  8(4583) SIP Request:
> > > Dec 11 16:07:19 sip ser:  8(4583)  method:  <REGISTER>
> > > Dec 11 16:07:19 sip ser:  8(4583)  uri:     <sip:sip.coptalk.com>
> > > Dec 11 16:07:19 sip ser:  8(4583)  version: <SIP/2.0>
> > > Dec 11 16:07:19 sip ser:  8(4583) parse_headers: flags=1
> > > Dec 11 16:07:19 sip ser:  8(4583) end of header reached, state=5
> > > Dec 11 16:07:19 sip ser:  8(4583) parse_headers: Via found, flags=1
> > > Dec 11 16:07:19 sip ser:  8(4583) parse_headers: this is the first via
> > > Dec 11 16:07:19 sip ser:  8(4583) After parse_msg...
> > > Dec 11 16:07:19 sip ser:  8(4583) preparing to run routing scripts...
> > > Dec 11 16:07:19 sip ser:  8(4583) entering main route 8(4583) DEBUG :
> > > is_maxfwd_present: searching for max_forwards header
> > > Dec 11 16:07:19 sip ser:  8(4583) parse_headers: flags=128
> > > Dec 11 16:07:19 sip ser:  8(4583) end of header reached, state=8
> > > Dec 11 16:07:19 sip ser:  8(4583) DEBUG: get_hdr_field: <To> [27];
> > > uri=[sip:Rick at sip.coptalk.com]
> > > Dec 11 16:07:19 sip ser:
> > > Dec 11 16:07:19 sip ser: ]
> > > Dec 11 16:07:19 sip ser:  8(4583) get_hdr_field: cseq <CSeq>: <7>
> > <REGISTER>
> > > Dec 11 16:07:19 sip ser:  8(4583) DEBUG: get_hdr_body : content_length=0
> > > Dec 11 16:07:19 sip ser:  8(4583) found end of header
> > > Dec 11 16:07:19 sip ser:  8(4583) DEBUG: is_maxfwd_present: max_forwards
> > > header not found!
> > > Dec 11 16:07:19 sip ser:  8(4583) DEBUG: add_param: tag=1804086518
> > > Dec 11 16:07:19 sip ser:  8(4583) end of header reached, state=29
> > > Dec 11 16:07:19 sip ser:  8(4583) parse_headers: flags=256
> > > Dec 11 16:07:19 sip ser:  8(4583) find_first_route(): No Route headers
> > found
> > > Dec 11 16:07:19 sip ser:  8(4583) loose_route(): There is no Route HF
> > > Dec 11 16:07:19 sip ser:  8(4583) check_self - checking if host==us: 16==9
> > > &&  [sip.coptalk.com] == [127.0.0.1]
> > > Dec 11 16:07:19 sip ser:  8(4583) check_self - checking if port 5060
> > > matches port 5060
> > > Dec 11 16:07:19 sip ser:  8(4583) check_self - checking if host==us: 16==13
> > > &&  [sip.coptalk.com] == [64.189.165.205]
> > > Dec 11 16:07:19 sip ser:  8(4583) check_self - checking if port 5060
> > > matches port 5060
> > > Dec 11 16:07:19 sip ser:  8(4583) request for registration 8(4583)
> > > check_nonce(): comparing [3fd907c2aa2d6c72cd666f9109e45155055b2d36] and
> > > [3fd907c23a57f75133a55828041f2c9ee7b081c2]
> > > Dec 11 16:07:19 sip ser:  8(4583) pre_auth(): Invalid nonce value received,
> > > very suspicious !
> > > Dec 11 16:07:19 sip ser:
> > > Dec 11 16:07:19 sip ser: '
> > > Dec 11 16:07:19 sip ser:  8(4583) parse_headers: flags=-1
> > > Dec 11 16:07:19 sip ser:  8(4583) check_via_address(64.189.165.206,
> > > 64.189.165.206, 0)
> > > Dec 11 16:07:19 sip ser:  8(4583) receive_msg: cleaning up
> > > Dec 11 16:07:19 sip ser:  6(4581) SIP Request:
> > > Dec 11 16:07:19 sip ser:  6(4581)  method:  <REGISTER>
> > > Dec 11 16:07:19 sip ser:  6(4581)  uri:     <sip:sip.coptalk.com>
> > > Dec 11 16:07:19 sip ser:  6(4581)  version: <SIP/2.0>
> > > Dec 11 16:07:19 sip ser:  6(4581) parse_headers: flags=1
> > > Dec 11 16:07:19 sip ser:  6(4581) end of header reached, state=5
> > > Dec 11 16:07:19 sip ser:  6(4581) parse_headers: Via found, flags=1
> > > Dec 11 16:07:19 sip ser:  6(4581) parse_headers: this is the first via
> > > Dec 11 16:07:19 sip ser:  6(4581) After parse_msg...
> > > Dec 11 16:07:19 sip ser:  6(4581) preparing to run routing scripts...
> > > Dec 11 16:07:19 sip ser:  6(4581) entering main route 6(4581) DEBUG :
> > > is_maxfwd_present: searching for max_forwards header
> > > Dec 11 16:07:19 sip ser:  6(4581) parse_headers: flags=128
> > > Dec 11 16:07:19 sip ser:  6(4581) end of header reached, state=8
> > > Dec 11 16:07:19 sip ser:  6(4581) DEBUG: get_hdr_field: <To> [27];
> > > uri=[sip:Rick at sip.coptalk.com]
> > > Dec 11 16:07:19 sip ser:
> > > Dec 11 16:07:19 sip ser: ]
> > > Dec 11 16:07:19 sip ser:  6(4581) get_hdr_field: cseq <CSeq>: <8>
> > <REGISTER>
> > > Dec 11 16:07:19 sip ser:  6(4581) DEBUG: get_hdr_body : content_length=0
> > > Dec 11 16:07:19 sip ser:  6(4581) found end of header
> > > Dec 11 16:07:19 sip ser:  6(4581) DEBUG: is_maxfwd_present: max_forwards
> > > header not found!
> > > Dec 11 16:07:19 sip ser:  6(4581) DEBUG: add_param: tag=1804086518
> > > Dec 11 16:07:19 sip ser:  6(4581) end of header reached, state=29
> > > Dec 11 16:07:19 sip ser:  6(4581) parse_headers: flags=256
> > > Dec 11 16:07:19 sip ser:  6(4581) find_first_route(): No Route headers
> > found
> > > Dec 11 16:07:19 sip ser:  6(4581) loose_route(): There is no Route HF
> > > Dec 11 16:07:19 sip ser:  6(4581) check_self - checking if host==us: 16==9
> > > &&  [sip.coptalk.com] == [127.0.0.1]
> > > Dec 11 16:07:19 sip ser:  6(4581) check_self - checking if port 5060
> > > matches port 5060
> > > Dec 11 16:07:19 sip ser:  6(4581) check_self - checking if host==us: 16==13
> > > &&  [sip.coptalk.com] == [64.189.165.205]
> > > Dec 11 16:07:19 sip ser:  6(4581) check_self - checking if port 5060
> > > matches port 5060
> > > Dec 11 16:07:20 sip ser:  6(4581) request for registration 6(4581)
> > > check_nonce(): comparing [3fd907e3929aea9bad25fbd47b3ea062d9215574] and
> > > [3fd907e3929aea9bad25fbd47b3ea062d9215574]
> > > Dec 11 16:07:20 sip ser:  6(4581) get_ha1(): no result for user
> > > 'Rick at coptalk.com'
> > > Dec 11 16:07:20 sip ser:
> > > Dec 11 16:07:20 sip ser: '
> > > Dec 11 16:07:20 sip ser:  6(4581) parse_headers: flags=-1
> > > Dec 11 16:07:20 sip ser:  6(4581) check_via_address(64.189.165.206,
> > > 64.189.165.206, 0)
> > > Dec 11 16:07:20 sip ser:  6(4581) receive_msg: cleaning up
> > >
> > > _______________________________________________
> > > Serusers mailing list
> > > serusers at lists.iptel.org
> > > http://lists.iptel.org/mailman/listinfo/serusers
> > >
> >
> >
> >Saludos
> >JesusR.
> >
> >-------------------------------
> >Jesus Rodriguez
> >VozTelecom Sistemas, S.L.
> >jesusr at voztele.com
> >http://www.voztele.com
> >Tel. 902360305
> >-------------------------------
>


Saludos
JesusR.

-------------------------------
Jesus Rodriguez
VozTelecom Sistemas, S.L.
jesusr at voztele.com
http://www.voztele.com
Tel. 902360305
-------------------------------

More information about the sr-users mailing list