[Serusers] NatHelper & Portaone RTP Proxy

[Darren Sessions]

My next questions is then, what configuration changes do I make to the
nathelper server to make it forward requests made from the endpoints to the
primary ser box? and how does voicemail come into play (using sems)? Does
the nathelper server "know" about all the servers or simply does the
signaling traffic and rtp traffic get routed through the nathelper box?

Thanks a ton for all the help!

 - Darren

-----Original Message-----
From: TeleSIP [mailto:ricvil at telesip.net]
Sent: Wednesday, December 03, 2003 10:46 AM
To: Darren Sessions
Cc: serusers at lists.iptel.org
Subject: Re: [Serusers] NatHelper & Portaone RTP Proxy


It works great on RedHat.  We have it running now for about 4 months on our
production servers and it has never crashed

----- Original Message ----- 
From: "Darren Sessions" <dsessions at ionosphere.net>
To: "TeleSIP" <ricvil at telesip.net>
Cc: <serusers at lists.iptel.org>
Sent: Wednesday, December 03, 2003 10:16 AM
Subject: RE: [Serusers] NatHelper & Portaone RTP Proxy


> I'm starting over on a Redhat Linux box right now.
>
> I'll let you know how it goes..
>
>
> -----Original Message-----
> From: TeleSIP [mailto:ricvil at telesip.net]
> Sent: Wednesday, December 03, 2003 10:15 AM
> To: Darren Sessions
> Cc: serusers at lists.iptel.org
> Subject: Re: [Serusers] NatHelper & Portaone RTP Proxy
>
>
> Darren,
>
> 3 months ago I tried to get this to work on Solaris 8.  Maxim also put
some
> time into it but I was never able to get it to compile.  If you have
better
> luck please let us all know.
>
> Thanks,
> Andres.
>
> ----- Original Message ----- 
> From: "Darren Sessions" <dsessions at ionosphere.net>
> To: "Andrei Pelinescu-Onciul" <pelinescu-onciul at fokus.fraunhofer.de>
> Cc: <serusers at lists.iptel.org>
> Sent: Wednesday, December 03, 2003 9:40 AM
> Subject: RE: [Serusers] NatHelper & Portaone RTP Proxy
>
>
> > I am having problems compiling rtpproxy on a Sun Netra 1400t with
Solaris
> 9.
> >
> > root:/export/home/rtpproxy # make all
> > cc  -o main.o -c main.c
> > In file included from main.c:45:
> > myqueue.h:40:23: sys/cdefs.h: No such file or directory
> > main.c:51:17: err.h: No such file or directory
> > main.c: In function `main':
> > main.c:486: structure has no member named `sun_len'
> > make: *** [main.o] Error 1
> >
> > I am new to this stuff, so everyone will have to bear with me.
> >
> > I can't seem to find cdefs.h or err.h. I did however throw the
> Makefile.gnu
> > up as Makefile and uncommented the section labeled "for Solaris".
> >
> > Any help would be appreciated! :)
> >
> > Thanks,
> >
> >  - Darren
> >
> > -----Original Message-----
> > From: Andrei Pelinescu-Onciul
> > [mailto:pelinescu-onciul at fokus.fraunhofer.de]
> > Sent: Tuesday, December 02, 2003 5:36 PM
> > To: Darren Sessions
> > Cc: serusers at lists.iptel.org
> > Subject: Re: [Serusers] NatHelper & Portaone RTP Proxy
> >
> >
> > On Dec 02, 2003 at 17:10, Darren Sessions <dsessions at ionosphere.net>
> wrote:
> > > Someone correct me if I'm wrong, but is the typical setup for
Nathelper
> > and
> > > Portaone RTP proxy work on seperate servers with dual network cards?
> >
> > No. nathelper use unix sockets to communicate with rtprpoxy so they must
> > be located on the same box (ser runing nathelper and rtproxy).
> >
> > Also it is better to run/configure them on only one interface (to avoid
> >  packets with different source address than the destination of the
intial
> >  packet going back to the nat).
> >
> > >then
> > > talking to another SER box doing registrations and call routing? and
the
> > > Portaone RTP taking the voice packets?
> >
> >
> > Andrei
> >
> > _______________________________________________
> > Serusers mailing list
> > serusers at lists.iptel.org
> > http://lists.iptel.org/mailman/listinfo/serusers
> >
> >
>