[Serusers] NatHelper & Portaone RTP Proxy

TeleSIP ricvil at telesip.net
Wed Dec 3 16:46:04 CET 2003


It works great on RedHat.  We have it running now for about 4 months on our
production servers and it has never crashed

----- Original Message ----- 
From: "Darren Sessions" <dsessions at ionosphere.net>
To: "TeleSIP" <ricvil at telesip.net>
Cc: <serusers at lists.iptel.org>
Sent: Wednesday, December 03, 2003 10:16 AM
Subject: RE: [Serusers] NatHelper & Portaone RTP Proxy


> I'm starting over on a Redhat Linux box right now.
>
> I'll let you know how it goes..
>
>
> -----Original Message-----
> From: TeleSIP [mailto:ricvil at telesip.net]
> Sent: Wednesday, December 03, 2003 10:15 AM
> To: Darren Sessions
> Cc: serusers at lists.iptel.org
> Subject: Re: [Serusers] NatHelper & Portaone RTP Proxy
>
>
> Darren,
>
> 3 months ago I tried to get this to work on Solaris 8.  Maxim also put
some
> time into it but I was never able to get it to compile.  If you have
better
> luck please let us all know.
>
> Thanks,
> Andres.
>
> ----- Original Message ----- 
> From: "Darren Sessions" <dsessions at ionosphere.net>
> To: "Andrei Pelinescu-Onciul" <pelinescu-onciul at fokus.fraunhofer.de>
> Cc: <serusers at lists.iptel.org>
> Sent: Wednesday, December 03, 2003 9:40 AM
> Subject: RE: [Serusers] NatHelper & Portaone RTP Proxy
>
>
> > I am having problems compiling rtpproxy on a Sun Netra 1400t with
Solaris
> 9.
> >
> > root:/export/home/rtpproxy # make all
> > cc  -o main.o -c main.c
> > In file included from main.c:45:
> > myqueue.h:40:23: sys/cdefs.h: No such file or directory
> > main.c:51:17: err.h: No such file or directory
> > main.c: In function `main':
> > main.c:486: structure has no member named `sun_len'
> > make: *** [main.o] Error 1
> >
> > I am new to this stuff, so everyone will have to bear with me.
> >
> > I can't seem to find cdefs.h or err.h. I did however throw the
> Makefile.gnu
> > up as Makefile and uncommented the section labeled "for Solaris".
> >
> > Any help would be appreciated! :)
> >
> > Thanks,
> >
> >  - Darren
> >
> > -----Original Message-----
> > From: Andrei Pelinescu-Onciul
> > [mailto:pelinescu-onciul at fokus.fraunhofer.de]
> > Sent: Tuesday, December 02, 2003 5:36 PM
> > To: Darren Sessions
> > Cc: serusers at lists.iptel.org
> > Subject: Re: [Serusers] NatHelper & Portaone RTP Proxy
> >
> >
> > On Dec 02, 2003 at 17:10, Darren Sessions <dsessions at ionosphere.net>
> wrote:
> > > Someone correct me if I'm wrong, but is the typical setup for
Nathelper
> > and
> > > Portaone RTP proxy work on seperate servers with dual network cards?
> >
> > No. nathelper use unix sockets to communicate with rtprpoxy so they must
> > be located on the same box (ser runing nathelper and rtproxy).
> >
> > Also it is better to run/configure them on only one interface (to avoid
> >  packets with different source address than the destination of the
intial
> >  packet going back to the nat).
> >
> > >then
> > > talking to another SER box doing registrations and call routing? and
the
> > > Portaone RTP taking the voice packets?
> >
> >
> > Andrei
> >
> > _______________________________________________
> > Serusers mailing list
> > serusers at lists.iptel.org
> > http://lists.iptel.org/mailman/listinfo/serusers
> >
> >
>





More information about the sr-users mailing list