[Kamailio-Users] kamailio speed dial
mythili ram
happyalways.d at hotmail.com
Fri Sep 11 09:56:41 CEST 2009
Hiii...I installed kamailio 1.5.1 and mysql 5.0.37 properly. Authnetication is working properly. Now i'm going to configure the feature "speed dial".
I tried with two config files. I'm facing the same problem with two config files..
1st config file
-----------------------------------------------------------
#
# $Id: speeddial.cfg 4585 2008-08-06 08:20:30Z klaus_darilion $
#
# sample config script to use speeddial module
#
debug=3
log_stderror=yes
log_facility=LOG_LOCAL0
fork=yes
children=4
# ----------- global configuration parameters ------------------------
check_via=no # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
port=5060
# ------------------ module loading ----------------------------------
loadmodule "/usr/local/lib/kamailio/modules/sl.so"
loadmodule "/usr/local/lib/kamailio/modules/tm.so"
loadmodule "/usr/local/lib/kamailio/modules/rr.so"
loadmodule "/usr/local/lib/kamailio/modules/maxfwd.so"
loadmodule "/usr/local/lib/kamailio/modules/usrloc.so"
loadmodule "/usr/local/lib/kamailio/modules/registrar.so"
loadmodule "/usr/local/lib/kamailio/modules/textops.so"
loadmodule "/usr/local/lib/kamailio/modules/db_mysql.so"
loadmodule "/usr/local/lib/kamailio/modules/speeddial.so"
loadmodule "/usr/local/lib/kamailio/modules/mi_fifo.so"
loadmodule "/usr/local/lib/kamailio/modules/xlog.so"
# ----------------- setting module-specific parameters ---------------
modparam("speeddial", "db_url", "mysql://openser:openserrw@localhost/openser")
modparam("speeddial", "use_domain", 1)
# -- mi_fifo params --
modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo")
# -- usrloc params --
modparam("usrloc", "db_mode", 0)
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
# ------------------------- request routing logic -------------------
# main routing logic
route{
# initial sanity checks
if (!mf_process_maxfwd_header("10"))
{
sl_send_reply("483","Too Many Hops");
exit;
};
if (msg:len >= max_len )
{
sl_send_reply("513", "Message too big");
exit;
};
if (!method=="REGISTER") record_route();
if (loose_route())
{
if (!t_relay())
{
sl_reply_error();
};
exit;
};
if (!uri==myself)
{
if (!t_relay())
{
sl_reply_error();
};
exit;
};
if (uri==myself)
{
if (method=="REGISTER")
{
save("location");
exit;
};
if(uri=~"sip:[0-9]{2}@.*"){
xlog("L_INFO","mylog: test1.\n");
sd_lookup("speed_dial");
#sd_lookup("speed_dial", "sip:$au@$fd");
xlog("L_INFO","mylog: test2.\n");
}
lookup("aliases");
if (!uri==myself)
{
if (!t_relay())
{
sl_reply_error();
};
exit;
};
if (!lookup("location"))
{
sl_send_reply("404", "Not Found");
exit;
};
};
if (!t_relay())
{
sl_reply_error();
};
}
--------------------------------------------------------------------
I'm using the table speed_dial. My data in table is
username=5001
domain=192.168.64.94
sd_username=51
sd_domain=192.168.64.94
I dialled 51 from useragent 1001. the output is not found.
but it is displaying test1 and test2 messages from my cfg file which i gave, i.e., it is entring into loop and function sd_lookup("speed_dial"). But the problem with speed_dial i think so...
Please help me......
2nd config file
---------------------------------------------------------------------
#
# $Id: kamailio.cfg 5881 2009-06-22 09:13:04Z henningw $
#
# Kamailio (OpenSER) SIP Server - basic configuration script
# - web: http://www.kamailio.org
# - svn: http://openser.svn.sourceforge.net/viewvc/openser/
#
# Direct your questions about this file to: <users at lists.kamailio.org>
#
# Refer to the Core CookBook at http://www.kamailio.org/dokuwiki/doku.php
# for an explanation of possible statements, functions and parameters.
#
# There are comments showing how to enable different features in th econfig
# file. Such commented code starts with #X# where X is a letter to identify
# a feature. Delete entire #X# if you want to enable that feature. Next are
# sed commands that help you enable such features.
#
# *** To enamble mysql execute:
# sed -i 's///g' kamailio.cfg
#
# *** To enamble authentication execute:
# - enable mysql
# sed -i 's///g' kamailio.cfg
# - add users using 'kamctl'
#
# *** To enamble persistent user location execute:
# - enable mysql
# sed -i 's/#u#//g' kamailio.cfg
#
# *** To enamble presence server execute:
# - enable mysql
# sed -i 's/#p#//g' kamailio.cfg
#
# *** To enamble nat traversal execute:
# sed -i 's/#n#//g' kamailio.cfg
# - install RTPProxy: http://www.rtpproxy.org
# - start RTPProxy:
# rtpproxy -l _your_public_ip_ -s udp:localhost:7722
#
# *** To enhance accounting execute:
# - enable mysql
# sed -i 's/#c#//g' kamailio.cfg
# - add following columns to database
# ALTER TABLE acc ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT '';
# ALTER TABLE acc ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT '';
# ALTER TABLE acc ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT '';
# ALTER TABLE acc ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT '';
# ALTER TABLE acc ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT '';
# ALTER TABLE missed_calls ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT '';
# ALTER TABLE missed_calls ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT '';
# ALTER TABLE missed_calls ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT '';
# ALTER TABLE missed_calls ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT '';
# ALTER TABLE missed_calls ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT '';
#
####### Global Parameters #########
debug=3
log_stderror=yes
log_facility=LOG_LOCAL0
fork=yes
children=4
/* uncomment the following lines to enable debugging */
#debug=6
#fork=no
#log_stderror=yes
/* uncomment the next line to disable TCP (default on) */
#disable_tcp=yes
/* uncomment the next line to enable the auto temporary blacklisting of
not available destinations (default disabled) */
#disable_dns_blacklist=no
/* uncomment the next line to enable IPv6 lookup after IPv4 dns
lookup failures (default disabled) */
#dns_try_ipv6=yes
/* uncomment the next line to disable the auto discovery of local aliases
based on revers DNS on IPs (default on) */
#auto_aliases=no
/* uncomment the following lines to enable TLS support (default off) */
#disable_tls = no
#listen = tls:your_IP:5061
#tls_verify_server = 1
#tls_verify_client = 1
#tls_require_client_certificate = 0
#tls_method = TLSv1
#tls_certificate = "/usr/local/etc/kamailio/tls/user/user-cert.pem"
#tls_private_key = "/usr/local/etc/kamailio/tls/user/user-privkey.pem"
#tls_ca_list = "/usr/local/etc/kamailio/tls/user/user-calist.pem"
port=5070
/* uncomment and configure the following line if you want Kamailio to
bind on a specific interface/port/proto (default bind on all available) */
#listen=udp:192.168.1.2:5060
####### Modules Section ########
#set module path
mpath="/usr/local/lib/kamailio/modules/"
/* uncomment next line for MySQL DB support */
loadmodule "db_mysql.so"
loadmodule "mi_fifo.so"
loadmodule "sl.so"
loadmodule "tm.so"
loadmodule "rr.so"
loadmodule "pv.so"
loadmodule "maxfwd.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "textops.so"
loadmodule "uri_db.so"
loadmodule "siputils.so"
loadmodule "xlog.so"
loadmodule "acc.so"
loadmodule "speeddial.so"
/* uncomment next lines for MySQL based authentication support
NOTE: a DB (like db_mysql) module must be also loaded */
loadmodule "auth.so"
loadmodule "auth_db.so"
/* uncomment next line for aliases support
NOTE: a DB (like db_mysql) module must be also loaded */
#loadmodule "alias_db.so"
/* uncomment next line for multi-domain support
NOTE: a DB (like db_mysql) module must be also loaded
NOTE: be sure and enable multi-domain support in all used modules
(see "multi-module params" section ) */
#loadmodule "domain.so"
/* uncomment the next two lines for presence server support
NOTE: a DB (like db_mysql) module must be also loaded */
#p#loadmodule "presence.so"
#p#loadmodule "presence_xml.so"
#n#loadmodule "nathelper.so"
# ----------------- setting module-specific parameters ---------------
# ----- mi_fifo params -----
modparam("mi_fifo", "fifo_name", "/tmp/kamailio_fifo")
# ----- rr params -----
# add value to ;lr param to cope with most of the UAs
modparam("rr", "enable_full_lr", 1)
# do not append from tag to the RR (no need for this script)
modparam("rr", "append_fromtag", 0)
# ----- rr params -----
modparam("registrar", "method_filtering", 1)
/* uncomment the next line to disable parallel forking via location */
# modparam("registrar", "append_branches", 0)
/* uncomment the next line not to allow more than 10 contacts per AOR */
#modparam("registrar", "max_contacts", 10)
# ----- uri_db params -----
/* by default we disable the DB support in the module as we do not need it
in this configuration */
modparam("uri_db", "use_uri_table", 0)
modparam("uri_db", "db_url", "")
# ----- acc params -----
/* what sepcial events should be accounted ? */
modparam("acc", "early_media", 1)
modparam("acc", "report_ack", 1)
modparam("acc", "report_cancels", 1)
/* by default ww do not adjust the direct of the sequential requests.
if you enable this parameter, be sure the enable "append_fromtag"
in "rr" module */
modparam("acc", "detect_direction", 0)
/* account triggers (flags) */
modparam("acc", "failed_transaction_flag", 3)
modparam("acc", "log_flag", 1)
modparam("acc", "log_missed_flag", 2)
modparam("acc", "log_extra",
"src_user=$fU;src_domain=$fd;dst_ouser=$tU;dst_user=$rU;dst_domain=$rd")
/* uncomment the following lines to enable DB accounting also */
#c#modparam("acc", "db_flag", 1)
#c#modparam("acc", "db_missed_flag", 2)
#c#modparam("acc", "db_url",
#c# "mysql://openser:openserrw@localhost/openser")
#c#modparam("acc", "db_extra",
#c# "src_user=$fU;src_domain=$fd;dst_ouser=$tU;dst_user=$rU;dst_domain=$rd")
# ----- usrloc params -----
/* uncomment the following lines if you want to enable DB persistency
for location entries */
#u#modparam("usrloc", "db_mode", 0)
#u#modparam("usrloc", "db_url",
#u# "mysql://openser:openserrw@localhost/openser")
# ----- auth_db params -----
/* uncomment the following lines if you want to enable the DB based
authentication */
modparam("auth_db", "calculate_ha1", yes)
modparam("auth_db", "password_column", "password")
modparam("auth_db", "db_url",
"mysql://openser:openserrw@localhost/openser")
modparam("auth_db", "load_credentials", "")
# ----- alias_db params -----
/* uncomment the following lines if you want to enable the DB based
aliases */
#modparam("alias_db", "db_url",
# "mysql://openser:openserrw@localhost/openser")
# ----- domain params -----
/* uncomment the following lines to enable multi-domain detection
support */
#modparam("domain", "db_url",
# "mysql://openser:openserrw@localhost/openser")
#modparam("domain", "db_mode", 1) # Use caching
# ----- multi-module params -----
/* uncomment the following line if you want to enable multi-domain support
in the modules (dafault off) */
#modparam("alias_db|auth_db|usrloc|uri_db", "use_domain", 1)
# ----- presence params -----
/* uncomment the following lines if you want to enable presence */
#p#modparam("presence|presence_xml", "db_url",
#p# "mysql://openser:openserrw@localhost/openser")
#p#modparam("presence_xml", "force_active", 1)
#p#modparam("presence", "server_address", "sip:192.168.1.2:5060")
# -- nathelper
#n#modparam("nathelper", "rtpproxy_sock", "udp:127.0.0.1:7722")
#n#modparam("nathelper", "natping_interval", 30)
#n#modparam("nathelper", "ping_nated_only", 1)
#n#modparam("nathelper", "sipping_bflag", 7)
#n#modparam("nathelper", "sipping_from", "sip:pinger at kamailio.org")
#n#modparam("registrar|nathelper", "received_avp", "$avp(i:80)")
#n#modparam("usrloc", "nat_bflag", 6)
####### Routing Logic ########
# main request routing logic
route{
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
exit;
}
#
# NAT detection
route(4);
if (has_totag()) {
# sequential request withing a dialog should
# take the path determined by record-routing
if (loose_route()) {
if (is_method("BYE")) {
setflag(1); # do accounting ...
setflag(3); # ... even if the transaction fails
}
route(1);
} else {
if (is_method("SUBSCRIBE") && uri == myself) {
# in-dialog subscribe requests
route(2);
exit;
}
if ( is_method("ACK") ) {
if ( t_check_trans() ) {
# non loose-route, but stateful ACK; must be an ACK after a 487 or e.g. 404 from upstream server
t_relay();
exit;
} else {
# ACK without matching transaction ... ignore and discard.\n");
exit;
}
}
sl_send_reply("404","Not here");
}
exit;
}
#initial requests
# CANCEL processing
if (is_method("CANCEL"))
{
if (t_check_trans())
t_relay();
exit;
}
t_check_trans();
# authentication
route(3);
# record routing
if (!is_method("REGISTER|MESSAGE"))
record_route();
# account only INVITEs
if (is_method("INVITE")) {
setflag(1); # do accounting
}
if (!uri==myself)
/* replace with following line if multi-domain support is used */
##if (!is_uri_host_local())
{
append_hf("P-hint: outbound\r\n");
# if you have some interdomain connections via TLS
##if($rd=="tls_domain1.net") {
## t_relay("tls:domain1.net");
## exit;
##} else if($rd=="tls_domain2.net") {
## t_relay("tls:domain2.net");
## exit;
##}
route(1);
}
# requests for my domain
if( is_method("PUBLISH|SUBSCRIBE"))
route(2);
if (is_method("REGISTER"))
{
if (!save("location"))
sl_reply_error();
exit;
}
if ($rU==NULL) {
# request with no Username in RURI
sl_send_reply("484","Address Incomplete");
exit;
}
# apply DB based aliases (uncomment to enable)
##alias_db_lookup("dbaliases");
if(uri=~"sip:[0-9]{2}@.*"){
xlog("L_INFO","mylog: test1.\n");
sd_lookup("speed_dial", "sip:$au@$fd");
#sd_lookup("speed_dial");
xlog("L_INFO","mylog: test2.\n");
}
if (!lookup("location")) {
switch ($retcode) {
case -1:
case -3:
t_newtran();
t_reply("404", "Not Found");
exit;
case -2:
sl_send_reply("405", "Method Not Allowed");
exit;
}
}
# when routing via usrloc, log the missed calls also
setflag(2);
route(1);
}
route[1] {
#n# if (check_route_param("nat=yes")) {
#n# setbflag(6);
#n# }
#n# if (isflagset(5) || isbflagset(6)) {
#n# route(5);
#n# }
/* example how to enable some additional event routes */
if (is_method("INVITE")) {
#t_on_branch("1");
t_on_reply("1");
t_on_failure("1");
}
if (!t_relay()) {
sl_reply_error();
}
exit;
}
# Presence route
/* uncomment the whole following route for enabling presence server */
route[2]
{
#p# if (!t_newtran())
#p# {
#p# sl_reply_error();
#p# exit;
#p# };
#p#
#p# if(is_method("PUBLISH"))
#p# {
#p# handle_publish();
#p# t_release();
#p# }
#p# else
#p# if( is_method("SUBSCRIBE"))
#p# {
#p# handle_subscribe();
#p# t_release();
#p# }
#p# exit;
# if presence enabled, this part will not be executed
if (is_method("PUBLISH") || $rU==null)
{
sl_send_reply("404", "Not here");
exit;
}
return;
}
# Authentication route
/* uncomment the whole following route for enabling authentication */
route[3] {
if (is_method("REGISTER"))
{
# authenticate the REGISTER requests (uncomment to enable auth)
if (!www_authorize("", "subscriber"))
{
www_challenge("", "0");
exit;
}
if ($au!=$tU)
{
sl_send_reply("403","Forbidden auth ID");
exit;
}
} else {
# authenticate if from local subscriber (uncomment to enable auth)
if (from_uri==myself)
{
if (!proxy_authorize("", "subscriber")) {
proxy_challenge("", "0");
exit;
}
if (is_method("PUBLISH"))
{
if ($au!=$tU) {
sl_send_reply("403","Forbidden auth ID");
exit;
}
} else {
if ($au!=$fU) {
sl_send_reply("403","Forbidden auth ID");
exit;
}
}
consume_credentials();
# caller authenticated
}
}
return;
}
# Caller NAT detection route
/* uncomment the whole following route for enabling Caller NAT Detection */
route[4]{
#n# force_rport();
#n# if (nat_uac_test("19")) {
#n# if (method=="REGISTER") {
#n# fix_nated_register();
#n# } else {
#n# fix_nated_contact();
#n# }
#n# setflag(5);
#n# }
return;
}
# RTPProxy control
/* uncomment the whole following route for enabling RTPProxy Control */
route[5] {
#n# if (is_method("BYE")) {
#n# unforce_rtp_proxy();
#n# } else if (is_method("INVITE")){
#n# force_rtp_proxy();
#n# }
#n# if (!has_totag()) add_rr_param(";nat=yes");
return;
}
branch_route[1] {
xdbg("new branch at $ru\n");
}
onreply_route[1] {
xdbg("incoming reply\n");
#n# if ((isflagset(5) || isbflagset(6)) && status=~"(183)|(2[0-9][0-9])") {
#n# force_rtp_proxy();
#n# }
#n# if (isbflagset(6)) {
#n# fix_nated_contact();
#n# }
}
failure_route[1] {
#n# if (is_method("INVITE")
#n# && (isbflagset(6) || isflagset(5))) {
#n# unforce_rtp_proxy();
#n# }
if (t_was_cancelled()) {
exit;
}
# uncomment the following lines if you want to block client
# redirect based on 3xx replies.
##if (t_check_status("3[0-9][0-9]")) {
##t_reply("404","Not found");
## exit;
##}
# uncomment the following lines if you want to redirect the failed
# calls to a different new destination
##if (t_check_status("486|408")) {
## sethostport("192.168.2.100:5060");
## append_branch();
## # do not set the missed call flag again
## t_relay();
##}
}
-------------------------------------------------------------------
Here i'm using the table speed_dial. My data in table is
username=5001
domain=192.168.64.94
sd_username=51
sd_domain=192.168.64.94
I dialled 51 from useragent 1001. the output is not found.
but it is displaying test1 and test2 messages from my cfg file which i gave, i.e., it is entring into loop and function sd_lookup("speed_dial"). But the problem with speed_dial i think so
Problem is same in two files...
Please help me...
Thanks in advance....
regards,
Mythili.
_________________________________________________________________
News, sports, entertainment and fine living…learn the ropes on MSN India
http://in.msn.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.kamailio.org/pipermail/users/attachments/20090911/58917ac0/attachment-0001.htm>
More information about the Users
mailing list