[Kamailio-Users] Where are going my pua_dialoginfo publishes ?
Eric PTAK
eric.ptak.fr at gmail.com
Wed Mar 4 16:23:35 CET 2009
After a quick source inspection, for the expires=0 : the value is taken from
override_lifetime parameter from pua_dialoginfo or from the constructed
dialog timeout.
Both are equals to 0.
I still thinking this is not an error, because to remove a publication from
the PS a PUA must publish with expires=0.
Anca from opensips answered :
"In OpenSIPS you can set the 'presence_server' to configure where the
Publish messages are sent"
So I've tried to change outbound_proxy pua parameter but I'm still stuck...
Eric.
2009/3/4 Daniel-Constantin Mierla <miconda at gmail.com>
>
>
> On 03/04/2009 04:45 PM, Eric PTAK wrote:
>
>> Yes we're talking about the PUBLISH.
>> To clear my previous mail, the NOTIFY I mentioned is the NOTIFY that the
>> PS will send after the handle_publish().
>>
> OK, clear, handle_publish() does not happen as no PUBLISH is sent by PUA.
>
>> I checked pua_dialoginfo sources, and it uses dialog module's lifetime
>> parameter, I'll check on that.
>>
>
> Let me know if you discover there something wrong. I added lot of new
> features, but should not affect this side, however you never know...
>
> Cheers,
> Daniel
>
> Regards,
>> Eric.
>>
>> 2009/3/4 Daniel-Constantin Mierla <miconda at gmail.com <mailto:
>> miconda at gmail.com>>
>>
>>
>>
>> On 03/04/2009 04:36 PM, Eric PTAK wrote:
>>
>> I've well seen the expires=0 but I was thinking the PS will
>> notify with an expires=0.
>>
>>
>> But it is not a NOTIFY, it is the PUBLISH we talk here about, or
>> did I miss something?
>>
>> Cheers,
>> Daniel
>>
>> So I didn't thinking its a problem... I may be wrong :D
>> And to answer you, yes, it always happens.
>> Thanks you,
>> Eric.
>>
>> 2009/3/4 Daniel-Constantin Mierla <miconda at gmail.com
>> <mailto:miconda at gmail.com> <mailto:miconda at gmail.com
>>
>> <mailto:miconda at gmail.com>>>
>>
>>
>>
>>
>> On 03/04/2009 04:01 PM, Eric PTAK wrote:
>>
>> Hi,
>> I'm trying to use *_dialoginfo modules but I'm facing to a
>> missunderstanding, or a bug.
>> In fact, the presence server is working and I'm also
>> able to
>> subscribe to dialog event.
>> But when pua_dialoginfo uses pua to send the Publish, I
>> don't
>> know where it going...
>> I even not sure publishes are really sent.
>> This the log :
>> DBG:dialog:run_create_callbacks: dialog=0xb59d30b0
>> DBG:pua_dialoginfo:__dialog_created: new INVITE dialog
>> created: from=sip:alice at domain
>> DBG:core:grep_aliases: comparing host [0:domain:0] with us
>> [0:domain:0]
>> DBG:core:grep_aliases: match found for: [0:domain:0]
>> DBG:core:check_self: host == me
>> DBG:pua_dialoginfo:build_dialoginfo: new_body: <?xml
>> version="1.0"?> <dialog-info
>> xmlns="urn:ietf:params:xml:ns:dialog-info" version="0"
>> state="full" entity="sip:alice at domain"> <dialog
>> id="MzQ3N2FiMzhiZGIwNzhhNDhhNjcxN2Y5OGJhY2M0N2Q."
>> call-id="MzQ3N2FiMzhiZGIwNzhhNDhhNjcxN2Y5OGJhY2M0N2Q."
>> direction="initiator"> <state>Trying</state>
>> <remote>
>> <identity>sip:bob at domain</identity> <target
>> uri="sip:bob at domain"/> </remote> <local>
>> <identity>sip:alice at domain</identity> <target
>> uri="sip:alice at domain"/> </local> </dialog>
>> </dialog-info> DBG:pua_dialoginfo:dialog_publish:
>> publish uri=
>> sip:alice at domain
>> DBG:pua_dialoginfo:print_publ: publ:
>> DBG:pua_dialoginfo:print_publ: uri= sip:alice at domain
>> DBG:pua_dialoginfo:print_publ: id=
>> DIALOG_PUBLISH.MzQ3N2FiMzhiZGIwNzhhNDhhNjcxN2Y5OGJhY2M0N2Q.
>> DBG:pua_dialoginfo:print_publ: expires= 0
>> DBG:pua:send_publish: pres_uri=sip:alice at domain
>> DBG:pua:search_htable: core_hash= 118
>> DBG:pua:search_htable: record not found
>> DBG:pua:send_publish: insert type
>> DBG:pua:send_publish: UPDATE_TYPE and no record found
>> DBG:pua:send_publish: request for a publish with
>> expires 0 and
>> no record found
>>
>>
>> According to this message, the publish has the expires value 0,
>> therefore is no longer sent.
>>
>> Does this happen for all cases or from time to time?
>>
>> Cheers,
>> Daniel
>>
>> DBG:dialog:get_dlg_timeout: invalid AVP value, use
>> default timeout
>> DBG:tm:run_reqin_callbacks: trans=0xb59d3270, callback
>> type 1,
>> id 0 entered
>> Regards,
>> Eric.
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> Kamailio (OpenSER) - Users mailing list
>> Users at lists.kamailio.org
>> <mailto:Users at lists.kamailio.org>
>> <mailto:Users at lists.kamailio.org
>> <mailto:Users at lists.kamailio.org>>
>>
>> http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
>>
>> http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
>>
>>
>> -- Daniel-Constantin Mierla
>> http://www.asipto.com <http://www.asipto.com/>
>> <http://www.asipto.com/>
>>
>>
>>
>> -- Daniel-Constantin Mierla
>> http://www.asipto.com <http://www.asipto.com/>
>>
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> Kamailio (OpenSER) - Users mailing list
>> Users at lists.kamailio.org
>> http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
>> http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
>>
>
> --
> Daniel-Constantin Mierla
> http://www.asipto.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kamailio.org/pipermail/users/attachments/20090304/6ffae457/attachment.htm
More information about the Users
mailing list