[Kamailio-Users] LCR in Kamailio 1.4

[Asim Riaz]

On Thu, Feb 19, 2009 at 4:12 PM, Daniel-Constantin Mierla <miconda at gmail.com
> wrote:

>
>
> On 02/19/2009 06:06 PM, Asim Riaz wrote:
>
>>
>>
>> On Thu, Feb 19, 2009 at 3:53 PM, Daniel-Constantin Mierla <
>> miconda at gmail.com <mailto:miconda at gmail.com>> wrote:
>>
>>    Hello,
>>
>>
>>    On 02/19/2009 05:34 PM, Asim Riaz wrote:
>>
>>        Hello,
>>        I am using LCR, for some reason load_gws() function is not
>>        finding the gateway in DB, it was working in the start then
>>        added some more routes and after that everything stopped
>>        working, I am not sure where to start troubleshooting,  any idea ?
>>
>>
>>    run kamailio with higher debug mode (e.g., debug=5) in
>>    configuration file.
>>
>>    You should get more debug messages in the syslog, that may give
>>    you some hints. look for lines containing 'lcr'.
>>
>>    Cheers,
>>    Daniel
>>
>>
>> Hi Daniel,
>> I tried  higher debug level, not getting anything related to LCR all i am
>> getting XLOG messages "unable to find Gateway".
>>
>
> can you check if you have matching LCR rule for your call?
>
> Cheers,
> Daniel


 I have only one LCR route entry for now  with prefix 0 which is  matching
the GW with ID 1, as mentioned below and the number I am dialing is starting
from 0 so i think it should match my route entry right ?

Thanks,

Asim


>
>
>
>
>> Thanks,
>>
>> Asim
>>
>>
>>
>>
>>        kamctl lcr show
>>
>>        lcr routes
>>        +----+--------+----------+--------+----------+
>>        | id | prefix | from_uri | grp_id | priority |
>>        +----+--------+----------+--------+----------+
>>        |  9 | 0      |          |      1 |        1 |
>>        +----+--------+----------+--------+----------+
>>        lcr gateways
>>
>>  +------------+---------------+------+------------+-----------+--------+-------+------+-------+
>>        | gw_name    | ip_addr       | port | uri_scheme | transport |
>>        grp_id | strip | tag  | flags |
>>
>>  +------------+---------------+------+------------+-----------+--------+-------+------+-------+
>>        | XXXX           | XXXX | 5060 |          1 |         1 |
>>   1 |     0 |      |     0 |
>>
>>  +------------+---------------+------+------------+-----------+--------+-------+------+-------+
>>
>>
>>
>>        my routing script
>>
>>                 if(!load_gws()) {
>>                xlog("L_INFO", "[ROUTE-X] Unable To Find Gateway ");
>>                       sl_send_reply("503", "unable to find gateway");
>>                       exit;
>>               }
>>        Thanks in advance.
>>
>>        Asim
>>
>>  ------------------------------------------------------------------------
>>
>>        _______________________________________________
>>        Kamailio (OpenSER) - Users mailing list
>>        Users at lists.kamailio.org <mailto:Users at lists.kamailio.org>
>>        http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
>>        http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
>>
>>
>>    --    Daniel-Constantin Mierla
>>    http://www.asipto.com
>>
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> Kamailio (OpenSER) - Users mailing list
>> Users at lists.kamailio.org
>> http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
>> http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
>>
>
> --
> Daniel-Constantin Mierla
> http://www.asipto.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kamailio.org/pipermail/users/attachments/20090219/e82db9c0/attachment.htm