[Kamailio-Users] Load Balancing Asterisk using Kamailio

[LetMeKnow]

Hi Kurt,
Use the LCR and dispatcher modules in Kamailio



Thanks &Regards
Ravi Prakash Sunkara
VoIP Architect & JAVA-SIP Developer
+91-9999882776

Winston Churchill<http://www.brainyquote.com/quotes/authors/w/winston_churchill.html>
- "The best argument against democracy is a five-minute conversation
with
the average voter."

2009/4/27 Kurt Weasel <kurt.weasel at gmail.com>

> Hi,
>
> I searched around the web to load balance asterisk servers and found
> Kamailio for possible solution. Let's say I have two identical asterisk
> servers with same dialplan and configuration and I want both servers look
> like they have same IP address from clients. Based on my understanding, we
> need 1 Kamailio as load balancer and 2 Asterisk servers as the real servers.
> Let's say the setup is :
>
> Kamailio load balancer 192.168.2.1
> Asterisk Server #1 192.168.2.2
> Asterisk Server #2 192.168.2.3
>
> My question is, X-Lite softphone Configuration should be set to domain
> 192.168.2.1, right?
>
> I also want to know the step by step configuration to set kamailio as load
> balancer. I have not used Kamailio before. However after searching the
> documentation, the step (based on my understanding) is somewhat like this :
>
> 1. Install Kamailio. I will use the step by step here :
> http://kamailio.org/dokuwiki/doku.php/install:kamailio-1.5.x-from-svn
>
> 2. Then, using dipatcher module, I will configure it using this guide here
> : http://kamailio.org/dokuwiki/doku.php/asterisk:load-balancing-and-ha
> Then modify the dispatcher.list file to match the IP address of my asterisk
> servers :
>
> *1 sip:192.168.2.2:5060
> 1 sip:192.168.2.3:5060*
>
> Am I missing some steps?
> Do I also need to configure dialplan or any other file at Kamailio load
> balancer? Or those two steps basically done it all for simple load balancing
> configuration? Thanks for your responses.
>
> Best Regard,
> Kurt Weasel.
>
> _______________________________________________
> Kamailio (OpenSER) - Users mailing list
> Users at lists.kamailio.org
> http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
> http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kamailio.org/pipermail/users/attachments/20090427/fddbc2a4/attachment.htm