[Kamailio-Users] Send MaxCallDuration and UserCredit for freeradius-cdrtool
Diego Zuaneti Arruda
diego at fasternet.com.br
Tue Sep 30 17:58:42 CEST 2008
DanB,
I'm testing the freeradius-cdrtool, and found a possible problem.
When I turn off the call before answer, the session is not finished.
Here's a part of the logs:
rlm_python [freeradius-cdrtool]: Entering accounting section
rlm_python [freeradius-cdrtool]: Got the following params: (('Acct-Status-Type', 'Failed'), ('Service-Type', 'Sip-Session'), ('Sip-Response-Code', '503'), ('Sip-Method', 'Invite'), ('X-Ascend-Bridge', '0x694de248a0b22d087cf199b7'), ('Sip-From-Tag', '"000d6570880e01462b3c62f9-0908d279"'), ('Acct-Session-Id', '"000d6570-880e0028-2a382841-1ef5c833 at 200.187.80.9"'), ('User-Name', '"87001 at fastervoip.com.br"'), ('Calling-Station-Id', '"sip:87001 at fastervoip.com.br"'), ('Called-Station-Id', '"sip:01591184701 at fastervoip.com.br"'), ('Sip-Translated-Request-URI', '"sip:01591184701 at 200.187.80.17:5060;transport=udp"'), ('Sip-Rpid', '"87001"'), ('Source-IP', '"200.187.80.9"'), ('Source-Port', '"5070"'), ('Acct-Authentic', '49'), ('SIP-Proxy-IP', '"127.0.0.1"'), ('Canonical-URI', '"sip:01591184701 at fastervoip.com.br"'), ('Billing-Party', '"87001 at fastervoip.com.br"'), ('Contact', '"<sip:87001 at 200.187.80.9:5070;transport=udp>"'), ('NAS-Port', '5060'), ('Acct-Delay-Time', '0'), ('NAS-IP-Address', '127.0.0.1'), ('Client-IP-Address', '127.0.0.1'), ('Acct-Unique-Session-Id', '"3db548b64d9445ce"'))
rlm_python [freeradius-cdrtool]: Extracted atribute <Acct-Status-Type> with value <Failed>
rlm_python [freeradius-cdrtool]: Extracted atribute <User-Name> with value <87001 at fastervoip.com.br>
rlm_python [freeradius-cdrtool]: Extracted atribute <Canonical-URI> with value <sip:01591184701 at fastervoip.com.br>
rlm_python [freeradius-cdrtool]: Extracted atribute <Called-Station-Id> with value <sip:01591184701 at fastervoip.com.br>
rlm_python [freeradius-cdrtool]: Extracted atribute <Acct-Session-Id> with value <000d6570-880e0028-2a382841-1ef5c833 at 200.187.80.9>
rlm_python:EXCEPT:<type 'exceptions.TypeError'>: end_session() takes exactly 6 arguments (4 given)
modcall[accounting]: module "python" returns ?? for request 261
modcall: leaving group accounting (returns ok) for request 261
Sending Accounting-Response of id 147 to 127.0.0.1 port 41560
Finished request 261
Diego.
----- Original Message -----
From: DanB
To: Diego Zuaneti Arruda
Cc: users at lists.kamailio.org
Sent: Tuesday, September 30, 2008 11:54 AM
Subject: Re: [Kamailio-Users] Send MaxCallDuration and UserCredit for freeradius-cdrtool
"The avps received will be available in openser as: callMaxDur and credit, where callMaxDur is the maximum duration the user is allowed to be connected with the destination and credit represents the amount of credit available at starting of the call. This info can be used later in an bbua able to timeout calls based on duration.
"
On Tue, Sep 30, 2008 at 4:38 PM, Diego Zuaneti Arruda <diego at fasternet.com.br> wrote:
Thanks DanB, the problem was solved.
How send BYE when expires credit in conversation?
Thanks.
Diego.
----- Original Message -----
From: DanB
To: Diego Zuaneti Arruda
Cc: users at lists.kamailio.org
Sent: Tuesday, September 30, 2008 11:19 AM
Subject: Re: [Kamailio-Users] Send MaxCallDuration and UserCredit for freeradius-cdrtool
Here is an already patched version:
http://frad-cdrtool.sourceforge.net/rlm_digest.c
You should replace your rlm_digest.c with this one and recompile the server.
DanB
On Tue, Sep 30, 2008 at 4:14 PM, Diego Zuaneti Arruda <diego at fasternet.com.br> wrote:
I'm using the freeradius 1.1.7, and not patched the rlm_digest.
Where to find the patch rlm_digest ?
Diego.
----- Original Message -----
From: DanB
To: Diego Zuaneti Arruda
Cc: users at lists.kamailio.org
Sent: Tuesday, September 30, 2008 11:08 AM
Subject: Re: [Kamailio-Users] Send MaxCallDuration and UserCredit for freeradius-cdrtool
Diego,
the problem is with your digest module which is sanitizing the parameters in authentication phase only, therefore the parameters like Username, Digest-URI are not available in the authorization phase (no way for the connector to read them).
Did u patch your rlm_digest as per the README.txt? What version of freeradius are u using?
DanB
On Tue, Sep 30, 2008 at 3:56 PM, Diego Zuaneti Arruda <diego at fasternet.com.br> wrote:
DanB,
Yes, I changed the kamailio.cfg.
I´m sending the full log of radius attached.
Diego.
----- Original Message -----
From: DanB
To: Diego Zuaneti Arruda
Cc: users at lists.kamailio.org
Sent: Tuesday, September 30, 2008 10:34 AM
Subject: Re: [Kamailio-Users] Send MaxCallDuration and UserCredit for freeradius-cdrtool
Diego,
looks like there was no session started at first place.
Did u change the openser.cfg config? You need to add callid into radius_proxy_authorize so that the callid should be used (example in README.txt of the freeradius-cdrtool sources).
Also, can u post a full authorize/account_start/account_stop sequence as logged by "radiusd -X".
DanB
On Tue, Sep 30, 2008 at 3:00 PM, Diego Zuaneti Arruda <diego at fasternet.com.br> wrote:
Hi DanB,
I updated the CDRTool to version 6.6.8 and freeradius-cdrtool to version 1.2-pre.
I'm getting this log and not doing the Debit.
Sep 30 09:57:22 sipserver1 cdrtool[12948]: DebitBalance CallId=000d6570-880e0035-39c8f267-5c77e9d2 at 192.168.0.1 From=87001 at mydomain.com.br To=sip:00551599998888 at mydomain.com.br Gateway=127.0.0.1 Duration=11
Sep 30 09:57:22 sipserver1 cdrtool[12948]: ConnectFee=0.00 Span=1 Duration=60 DestId=55159 domain=mydomain.com.br Profile=551 Period=weekday Rate=551 Interval=0-24 Cost=0.85/60 Price=0.8500
Sep 30 09:57:22 sipserver1 cdrtool[12948]: Error: session 000d6570-880e0035-39c8f267-5c77e9d2 at 192.168.0.1 for 87001 at mydomain.com.br does not exist
Thanks.
Diego.
----- Original Message -----
From: DanB
To: Diego Zuaneti Arruda
Cc: users at lists.kamailio.org
Sent: Tuesday, September 30, 2008 5:47 AM
Subject: Re: [Kamailio-Users] Send MaxCallDuration and UserCredit for freeradius-cdrtool
Hi Diego,
you don't need to set anything in Users file. The connector does that for you dynamically, based on the responses received from cdrtool. Your configuration will be static and always limit the user to the same call duration. For more information, see the README file within freeradius-cdrtool source directory.
Cheers,
DanB
On Mon, Sep 29, 2008 at 10:49 PM, Diego Zuaneti Arruda <diego at fasternet.com.br> wrote:
Hi all,
How I send to freeradius-cdrtool the maxCallDuration and UserCredit?
On the /etc/raddb/users I have:
87001 at mydomain.com.br Auth-Type := Digest, User-Password == "mypassword"
Reply-Message = "Authenticated",
SIP-AVP = "authentic#1",
SIP-AVP = "callMaxDur:60",
SIP-AVP = "credit:25"
Is this correct ?
Thanks.
Diego.
_______________________________________________
Users mailing list
Users at lists.kamailio.org
http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kamailio.org/pipermail/users/attachments/20080930/921953da/attachment.htm
More information about the Users
mailing list