[Kamailio-Users] Authentication problems.

Buzukelis buzukelis at gmail.com
Wed Aug 6 13:48:52 CEST 2008


*Hi all,
** I'm trying to register few ata's to openser.*
*i puted two registrations to subscribers table.*
*but registaration allwais unauthorized.*
**
**
*ngrep output: *
*interface: eth0 (192.168.27.0/255.255.255.0)
filter: (ip) and ( port 5060 )*
*U 192.168.27.117:10186 -> 192.168.27.201:5060
REGISTER sip:192.168.27.201 SIP/2.0.
Via: SIP/2.0/UDP 192.168.27.117:10186;branch=z9hG4bK645148049;rport.
From: <sip:1000 at 192.168.27.201 <sip%3A1000 at 192.168.27.201>>;tag=604945105.
To: <sip:1000 at 192.168.27.201 <sip%3A1000 at 192.168.27.201>>.
Call-ID: 53873712-10186-1 at 192.168.27.117.
CSeq: 2000 REGISTER.
Contact: *.
Max-Forwards: 70.
User-Agent: Grandstream HT-502  V1.0B 1.0.1.8.
Expires: 0.
Allow: INVITE, ACK, OPTIONS, CANCEL, BYE, SUBSCRIBE, NOTIFY, INFO, REFER,
UPDATE.
Content-Length: 0.
.*
*
U 192.168.27.201:5060 -> 192.168.27.117:10186
SIP/2.0 401 Unauthorized.
Via: SIP/2.0/UDP 192.168.27.117:10186;branch=z9hG4bK645148049;rport=10186.
From: <sip:1000 at 192.168.27.201 <sip%3A1000 at 192.168.27.201>>;tag=604945105.
To: <sip:1000 at 192.168.27.201 <sip%3A1000 at 192.168.27.201>
>;tag=329cfeaa6ded039da25ff8cbb8668bd2.b963.
Call-ID: 53873712-10186-1 at 192.168.27.117.
CSeq: 2000 REGISTER.
WWW-Authenticate: Digest realm="192.168.27.201",
nonce="48998a3ba4544026eab5a8f7cf93dc258a5d26d7".
Server: OpenSER (1.3.2-notls (i386/linux)).
Content-Length: 0.
.
U 192.168.27.117:10186 -> 192.168.27.201:5060
REGISTER sip:192.168.27.201 SIP/2.0.
Via: SIP/2.0/UDP 192.168.27.117:10186;branch=z9hG4bK142179605;rport.
From: <sip:1000 at 192.168.27.201 <sip%3A1000 at 192.168.27.201>>;tag=604945105.
To: <sip:1000 at 192.168.27.201 <sip%3A1000 at 192.168.27.201>>.
Call-ID: 53873712-10186-1 at 192.168.27.117.
CSeq: 2001 REGISTER.
Contact: *.
Authorization: Digest username="1000", realm="192.168.27.201",
nonce="48998a3ba4544026eab5a8f7cf93dc258a5d26d7", uri="sip:19$
Max-Forwards: 70.
User-Agent: Grandstream HT-502  V1.0B 1.0.1.8.
Expires: 0.
Allow: INVITE, ACK, OPTIONS, CANCEL, BYE, SUBSCRIBE, NOTIFY, INFO, REFER,
UPDATE.
Content-Length: 0.
.

U 192.168.27.201:5060 -> 192.168.27.117:10186
SIP/2.0 401 Unauthorized.
Via: SIP/2.0/UDP 192.168.27.117:10186;branch=z9hG4bK142179605;rport=10186.
From: <sip:1000 at 192.168.27.201 <sip%3A1000 at 192.168.27.201>>;tag=604945105.
To: <sip:1000 at 192.168.27.201 <sip%3A1000 at 192.168.27.201>
>;tag=329cfeaa6ded039da25ff8cbb8668bd2.3c26.
Call-ID: 53873712-10186-1 at 192.168.27.117.
CSeq: 2001 REGISTER.
WWW-Authenticate: Digest realm="192.168.27.201",
nonce="48998a3ba4544026eab5a8f7cf93dc258a5d26d7".
Server: OpenSER (1.3.2-notls (i386/linux)).
Content-Length: 0.

openser.cfg

:#
# $Id: openser.cfg 1676 2007-02-21 13:16:34Z bogdan_iancu $
#
# simple quick-start config script
# Please refer to the Core CookBook at
http://www.openser.org/dokuwiki/doku.php
# for a explanation of possible statements, functions and parameters.
#
# ----------- global configuration parameters ------------------------
debug=3            # debug level (cmd line: -dddddddddd)
fork=yes
log_stderror=no    # (cmd line: -E)
children=4
# Uncomment these lines to enter debugging mode
#fork=no
#log_stderror=yes
#
port=5060
# ------------------ module loading ----------------------------------
#set module path
mpath="//lib/openser/modules/"
# Uncomment this if you want to use SQL database
loadmodule "mysql.so"
loadmodule "sl.so"
loadmodule "tm.so"
loadmodule "rr.so"
loadmodule "maxfwd.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "textops.so"
loadmodule "mi_fifo.so"
# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "auth.so"
loadmodule "auth_db.so"
# ----------------- setting module-specific parameters ---------------
# -- mi_fifo params --
modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo")
# -- usrloc params --
#modparam("usrloc", "db_mode",   0)
# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
modparam("usrloc", "db_mode", 2)
# -- auth params --
# Uncomment if you are using auth module
#
modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config),
# uncomment also the following parameter)
#
modparam("auth_db", "password_column", "password")
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
# -------------------------  request routing logic -------------------
# main routing logic
route{
    # initial sanity checks -- messages with
    # max_forwards==0, or excessively long requests
    if (!mf_process_maxfwd_header("10")) {
        sl_send_reply("483","Too Many Hops");
        exit;
    };
    if (msg:len >=  2048 ) {
        sl_send_reply("513", "Message too big");
        exit;
    };
    # we record-route all messages -- to make sure that
    # subsequent messages will go through our proxy; that's
    # particularly good if upstream and downstream entities
    # use different transport protocol
    if (!method=="REGISTER")
        record_route();
    # subsequent messages withing a dialog should take the
    # path determined by record-routing
    if (loose_route()) {
        # mark routing logic in request
        append_hf("P-hint: rr-enforced\r\n");
        route(1);
    };
    if (!uri==myself) {
        # mark routing logic in request
        append_hf("P-hint: outbound\r\n");
        # if you have some interdomain connections via TLS
        #if(uri=~"@tls_domain1.net") {
        #       t_relay("tls:domain1.net");
        #       exit;
        #} else if(uri=~"@tls_domain2.net") {
        #       t_relay("tls:domain2.net");
        #       exit;
        #}
        route(1);
    };
    # if the request is for other domain use UsrLoc
    # (in case, it does not work, use the following command
    # with proper names and addresses in it)
    if (uri==myself) {
        if (method=="REGISTER") {
        # Uncomment this if you want to use digest.
            if (!www_authorize("", "subscriber")) {
                www_challenge("", "0");
                exit;
            };
            save("location");
            exit;
        };
        if (!proxy_authorize("","subscriber")) {
            proxy_challenge("","0");
            exit;
        };
        consume_credentials();
        lookup("aliases");
        if (!uri==myself) {
            append_hf("P-hint: outbound alias\r\n");
            route(1);
        };
        # native SIP destinations are handled using our USRLOC DB
        if (!lookup("location")) {
            sl_send_reply("404", "Not Found");
            exit;
        };
        append_hf("P-hint: usrloc applied\r\n");
    };
    route(1);
}
route[1] {
    # send it out now; use stateful forwarding as it works reliably
    # even for UDP2TCP
    if (!t_relay()) {
        sl_reply_error();
    };
    exit;
}



can not understand why this configuration is not working to me???
any help will be apreciated.

*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kamailio.org/pipermail/users/attachments/20080806/d56a89d3/attachment.htm 


More information about the Users mailing list