[OpenSER-Users] OpenSER + FreeRadius error

[Norman Brandinger]

Hi Marc,

I recall this problem when working on 64-bit machines.  Seems that
radiusclient-ng needed a patch.  Not sure if the current CVS has this
problem fixed.

The radiusclient distribution is here:
http://developer.berlios.de/projects/radiusclient-ng/
Take a look at the 64-bit patches.

If your machines aren't 64-bit, your problem may be somewhere else.

Regards,
Norm




Marc LEURENT wrote:
> It seems that the credentials send by radiusclient from openser are
> wrong whereas when I use a rastest, it's working!
> Strange!
>
> rad_recv: Accounting-Request packet from host 213.91.4.213:34734,
> id=43, length=293
> Received Accounting-Request packet from 213.91.4.213 with invalid
> signature!  (Shared secret is incorrect.) Dropping packet without
> response.
> Finished request 24
> Going to the next request
> --- Walking the entire request list ---
> Waking up in 6 seconds...
> --- Walking the entire request list ---
> Cleaning up request 24 ID 43 with timestamp 46f23ab0
> Nothing to do.  Sleeping until we see a request.
> rad_recv: Accounting-Request packet from host 213.91.4.213:34734,
> id=43, length=293
> Received Accounting-Request packet from 213.91.4.213 with invalid
> signature!  (Shared secret is incorrect.) Dropping packet without
> response.
> Finished request 25
> Going to the next request
> --- Walking the entire request list ---
> Waking up in 6 seconds...
> --- Walking the entire request list ---
> Cleaning up request 25 ID 43 with timestamp 46f23aba
> Nothing to do.  Sleeping until we see a request.
>
>
>
>
>
> Marc LEURENT a écrit :
> > Does this error means something to somebody??
> > Thanks
> > ERROR:acc:acc_rad_request: radius-ing failed
>
>
> > My openser.cfg
>
>
> > # -- acc params (with radius )--
> > modparam("acc", "radius_config",
> "/etc/radiusclient-ng/radiusclient.conf")
> > modparam("acc", "radius_flag", 1)
> > modparam("acc", "radius_missed_flag", 2)
>
>
> > .....
>
>
> > ################### SET RADIUS ACCOUTING FLAGS
> #################################
> >         # Set the acc flags
> >         xlog("JUSTE BEFORE SETTING FLAGS FOR RADIUS\r\n");
> >         if(is_method("INVITE") && !has_totag()) {
> >                xlog("L_INFO", "I AM SETTING THE FLAGS FOR RADIUS \r\n");
> >                $avp(can_uri) = $ru;            # SIP Request's URI
> >                $avp(billing_party) = "sip:" + $au + "@" + $ar; #
> From URI
> >                $avp(user_name) = $fu;
> >                xlog("!!!! FROM TAG = $ft\r\n");
>
> >                xlog("SETTING FLAGS 1 & 2 FOR RADIUS \r\n");
> >                setflag(1);             # radius_flag
> >                setflag(2);             # radius_missed_flag
> >         };
>
>
>
>
>
>
>
> > DEBUG OUTPUT:
>
> >  3(26026) DEBUG: update_totag_set: new totag
> >  3(26026) DEBUG: add_to_tail_of_timer[2]: 0x2b898c7eb9d0 (12)
> >  3(26026) DEBUG:tm:relay_reply: sent buf=0x61d2e8: SIP/2.0 2...,
> shmem=0x2b898c7ed7a8: SIP/2.0 2
> >  3(26026) DBG: trans=0x2b898c7eb950, callback type 128, id 0 entered
> >  3(26026) ERROR:acc:acc_rad_request: radius-ing failed
> >  3(26026) DEBUG: cleanup_uac_timers: RETR/FR timers reset
> >  3(26026) DEBUG:tm:UNREF_UNSAFE: after is 0
> >  3(26026) DEBUG:destroy_avp_list: destroying list (nil)
> >  3(26026) receive_msg: cleaning up
> >  1(26024) SIP Request:
> >  1(26024)  method:  <ACK>
> >  1(26024)  uri:     <sip:105 at 82.127.0.79:1030;user=phone;nat=yes>
> >  1(26024)  version: <SIP/2.0>
> >  1(26024) parse_headers: flags=2
> >  1(26024) Found param type 232, <branch> =
> <z9hG4bK2175363103192047157>; state=16
> >  1(26024) end of header reached, state=5
> >  1(26024) parse_headers: Via found, flags=2
> >  1(26024) parse_headers: this is the first via
>
> _______________________________________________
> Users mailing list
> Users at openser.org
> http://openser.org/cgi-bin/mailman/listinfo/users

_______________________________________________
Users mailing list
Users at openser.org
http://openser.org/cgi-bin/mailman/listinfo/users