[Users] 1.2.0 LCR schema error or my method of load_gw?
Ovidiu Sas
sip.nslu at gmail.com
Wed May 16 21:43:52 CEST 2007
`openserctl' script already does that when you add/remove/modify lcr tables.
Regards,
Ovidiu Sas
On 5/16/07, Angel Carpintero <ack at telefonica.net> wrote:
> Hi guys,
>
> Charles i think that you can use `openserctl fifo lcr_reload' that will
> refresh your cache with DB content.
>
> -Angel
>
> El mié, 16-05-2007 a las 15:23 -0400, Ovidiu Sas escribió:
> > Hi Charles,
> >
> > In 1.2 the DB was removed, so only cached mode is available.
> > It should speed up things :-)
> >
> >
> > Regards,
> > Ovidiu Sas
> >
> > On 5/16/07, Charles Wang <lazy.charles at gmail.com> wrote:
> > > Dear Ovidiu,
> > >
> > > Thank you for your kind, and I solved it. You are right, it is cached mode.
> > > Is it possible to always be loaded it from DB not in cache?
> > >
> > > Thank you again.
> > >
> > > Best regards,
> > > Charles
> > >
> > >
> > > 2007/5/17, Ovidiu Sas <sip.nslu at gmail.com>:
> > > > Hi Charles,
> > > >
> > > > Starting with 1.2 lcr is operating in cached mode and therefore there
> > > > will be no SQL queries during a call.
> > > > You can use `openserctl fifo lcr_dump' to check the content of your
> > > tables.
> > > >
> > > >
> > > > Regards,
> > > > Ovidiu Sas
> > > >
> > > > On 5/16/07, Charles Wang <lazy.charles at gmail.com> wrote:
> > > > > Hi, Ovidiu,
> > > > >
> > > > > I update the from_uri field from '%' to Empty string.
> > > > > But the result is the same as before.
> > > > >
> > > > > No any SQL command related to lcr or gw or gw_grp in my mysql.log during
> > > I
> > > > > make an offnet call.
> > > > >
> > > > > Best regards,
> > > > > Charles
> > > > >
> > > > >
> > > > > 2007/5/16, Ovidiu Sas <sip.nslu at gmail.com>:
> > > > > > Hi Charles,
> > > > > >
> > > > > >
> > > > > > In the lcr table you should have an empty string, not '%'.
> > > > > >
> > > > > >
> > > > > > Regards,
> > > > > > Ovidiu Sas
> > > > > >
> > > > > > On 5/16/07, Charles Wang < lazy.charles at gmail.com> wrote:
> > > > > > > Hi all,
> > > > > > >
> > > > > > > I got this openser.cfg from http://www.sipwise.com/wizard .
> > > > > > > I tried to make a offnet call prefix with 00.
> > > > > > >
> > > > > > > I try to load_gws and next_gw for lcr.
> > > > > > > But I can't find out such as "select xxx from lcr" or "select xxx
> > > from
> > > > > gw"
> > > > > > > during these steps in my mysql.log ( I opened the log file myself ).
> > > And
> > > > > > > also it will not redirect to the voice gateway.
> > > > > > >
> > > > > > > Is it the error of my schemas ? Any idea for it please.
> > > > > > >
> > > > > > >
> > > > > > > #################### /var/log/message ####################
> > > > > > > May 16 22:52:05 XXX /usr/local/sbin/openser[29112]: New request -
> > > > > M=INVITE
> > > > > > > RURI= sip:00862123456789 at XXX.XXX.XXX F=sip:101 at XXX.XXX.XXX
> > > > > > > T=sip:00862123456789 at XXX.XXX.XXX IP=61.217.XXX.XXX
> > > > > > > ID=
> > > C8F50846-1452-4EDC-9726-5A3AFECDF533 at 192.168.11.9
> > > > > > > May 16 22:52:05 XXX /usr/local/sbin/openser[29112]: Proxy
> > > authentication
> > > > > > > failed - M=INVITE RURI=sip:00862123456789 at XXX.XXX.XXX F=
> > > > > sip:101 at XXX.XXX.XXX
> > > > > > > T= sip:00862123456789 at XXX.XXX.XXX IP=61.217.XXX.XXX
> > > > > > > ID=
> > > C8F50846-1452-4EDC-9726-5A3AFECDF533 at 192.168.11.9
> > > > > > > May 16 22:52:05 XXX /usr/local/sbin/openser[29117]: New request -
> > > > > M=INVITE
> > > > > > > RURI=sip:00862123456789 at XXX.XXX.XXX F=sip:101 at XXX.XXX.XXX
> > > > > > > T= sip:00862123456789 at XXX.XXX.XXX IP=61.217.XXX.XXX
> > > > > > > ID=
> > > C8F50846-1452-4EDC-9726-5A3AFECDF533 at 192.168.11.9
> > > > > > > May 16 22:52:05 XXX /usr/local/sbin/openser[29117]: Clear caller
> > > > > preferences
> > > > > > > - M=INVITE RURI=sip:00862123456789 at XXX.XXX.XXX F=
> > > sip:101 at XXX.XXX.XXX
> > > > > > > T= sip:00862123456789 at XXX.XXX.XXX IP=61.217.XXX.XXX
> > > > > > > ID=
> > > C8F50846-1452-4EDC-9726-5A3AFECDF533 at 192.168.11.9
> > > > > > > May 16 22:52:05 XXX /usr/local/sbin/openser[29117]: Load caller
> > > > > preferences
> > > > > > > for uuid '1' - M=INVITE RURI= sip:00862123456789 at XXX.XXX.XXX F=
> > > > > > > sip:101 at XXX.XXX.XXX T=sip:00862123456789 at XXX.XXX.XXX
> > > IP=61.217.XXX.XXX
> > > > > > > ID=
> > > C8F50846-1452-4EDC-9726-5A3AFECDF533 at 192.168.11.9
> > > > > > > May 16 22:52:05 XXX /usr/local/sbin/openser[29117]: Clear callee
> > > > > preferences
> > > > > > > - M=INVITE RURI= sip:00862123456789 at XXX.XXX.XXX F=
> > > sip:101 at XXX.XXX.XXX
> > > > > > > T=sip:00862123456789 at XXX.XXX.XXX IP=61.217.XXX.XXX
> > > > > > >
> > > ID=C8F50846-1452-4EDC-9726-5A3AFECDF533 at 192.168.11.9
> > > > > > > May 16 22:52:05 XXX /usr/local/sbin/openser[29117]: Callee is not
> > > local
> > > > > -
> > > > > > > M=INVITE RURI=sip:00862123456789 at XXX.XXX.XXX F=sip:101 at XXX.XXX.XXX
> > > > > > > T= sip:00862123456789 at XXX.XXX.XXX IP=61.217.XXX.XXX
> > > > > > >
> > > ID=C8F50846-1452-4EDC-9726-5A3AFECDF533 at 192.168.11.9
> > > > > > > May 16 22:52:05 XXX /usr/local/sbin/openser[29117]: Ready to Invite
> > > To
> > > > > > > External - M=INVITE RURI=sip:00862123456789 at XXX.XXX.XXX F=
> > > > > > > sip:101 at XXX.XXX.XXX T= sip:00862123456789 at XXX.XXX.XXX
> > > IP=61.217.XXX.XXX
> > > > > > >
> > > ID=C8F50846-1452-4EDC-9726-5A3AFECDF533 at 192.168.11.9
> > > > > > > May 16 22:52:05 XXX /usr/local/sbin/openser[29117]: Ready to 00 -
> > > > > M=INVITE
> > > > > > > RURI=sip:00862123456789 at XXX.XXX.XXX F=sip:101 at XXX.XXX.XXX
> > > > > > > T= sip:00862123456789 at XXX.XXX.XXX IP=61.217.XXX.XXX
> > > > > > >
> > > ID=C8F50846-1452-4EDC-9726-5A3AFECDF533 at 192.168.11.9
> > > > > > > May 16 22:52:05 XXX /usr/local/sbin/openser[29117]: Ready to Load
> > > PSTN
> > > > > > > gateways - M=INVITE RURI=sip:00862123456789 at XXX.XXX.XXX F=
> > > > > > > sip:101 at XXX.XXX.XXX T= sip:00862123456789 at XXX.XXX.XXX
> > > IP=61.217.XXX.XXX
> > > > > > >
> > > ID=C8F50846-1452-4EDC-9726-5A3AFECDF533 at 192.168.11.9
> > > > > > > May 16 22:52:05 XXX /usr/local/sbin/openser[29117]: Ready to NextGW
> > > -
> > > > > > > M=INVITE RURI=sip:00862123456789 at XXX.XXX.XXX F=sip:101 at XXX.XXX.XXX
> > > > > > > T= sip:00862123456789 at XXX.XXX.XXX IP=61.217.XXX.XXX
> > > > > > >
> > > ID=C8F50846-1452-4EDC-9726-5A3AFECDF533 at 192.168.11.9
> > > > > > > May 16 22:52:05 XXX /usr/local/sbin/openser[29117]: No PSTN gateways
> > > > > > > available - M=INVITE RURI=sip:00862123456789 at XXX.XXX.XXX F=
> > > > > > > sip:101 at XXX.XXX.XXX T= sip:00862123456789 at XXX.XXX.XXX
> > > IP=61.217.XXX.XXX
> > > > > > >
> > > ID=C8F50846-1452-4EDC-9726-5A3AFECDF533 at 192.168.11.9
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > #################### /tmp/mysql.log ####################
> > > > > > > 070516 22:52:05 755 Query select password,uuid from
> > > subscriber
> > > > > > > where username='101' AND domain=' xxx.xxx.xxx'
> > > > > > > 755 Query select value,attribute,type from
> > > > > > > usr_preferences where uuid='1'
> > > > > > > 755 Query select uuid from subscriber
> > > where
> > > > > > > username = '00862123456789'
> > > > > > >
> > > > > > >
> > > > > > > ===> gw table
> > > > > > > | id | gw_name | grp_id | ip_addr | port |
> > > uri_scheme
> > > > > |
> > > > > > > transport | strip | prefix |
> > > > > > > | 1 | my-test-gw | 1 | XXX.XXX.XXX.XXX | 5060 | 1
> > > > > |
> > > > > > > 1 | 0 | NULL |
> > > > > > >
> > > > > > > ===> gw schema
> > > > > > > | Field | Type | Null | Key |
> > > Default
> > > > > |
> > > > > > > Extra |
> > > > > > > | id | int(10) | NO | PRI |
> > > NULL
> > > > > |
> > > > > > > auto_increment |
> > > > > > > | gw_name | varchar(128) | NO | UNI | NULL |
> > > > > > > |
> > > > > > > | grp_id | int(10) unsigned | NO | MUL | NULL |
> > > > > > > |
> > > > > > > | ip_addr | varchar(15) | NO | | NULL
> > > |
> > > > > > > |
> > > > > > > | port | smallint(5) unsigned | YES | | NULL |
> > > > > > > |
> > > > > > > | uri_scheme | tinyint(3) unsigned | YES | | NULL |
> > > > > > > |
> > > > > > > | transport | tinyint(3) unsigned | YES | | NULL |
> > > > > > > |
> > > > > > > | strip | tinyint(3) unsigned | YES | | NULL |
> > > > > > > | <=== it should be varchar ?
> > > > > > > | prefix | varchar(16) | YES | | NULL
> > > |
> > > > > > > | <=== default value should be Empty or NULL
> > > ?
> > > > > > >
> > > > > > > ===> gw_grp table
> > > > > > > | grp_id | grp_name |
> > > > > > > | 1 | my-test-gw |
> > > > > > >
> > > > > > > ===> gw_grp schema
> > > > > > > | Field | Type | Null | Key | Default |
> > > Extra
> > > > > > > |
> > > > > > > | grp_id | int(10) unsigned | NO | PRI | NULL |
> > > auto_increment
> > > > > |
> > > > > > > | grp_name | varchar(64) | NO | | NULL |
> > > > > > > |
> > > > > > >
> > > > > > > ===> lcr table
> > > > > > > | id | prefix | from_uri | grp_id | priority
> > > |
> > > > > > > | 1 | 00862123456789 | % | 1 | 10 |
> > > > > > >
> > > > > > > ===> lcr schema
> > > > > > > | Field | Type | Null | Key | Default |
> > > > > Extra
> > > > > > > |
> > > > > > > | id | int(10) | NO | PRI | NULL |
> > > > > > > auto_increment |
> > > > > > > | prefix | varchar(16) | NO | MUL | NULL |
> > > > > > > |
> > > > > > > | from_uri | varchar(128) | YES | MUL | NULL |
> > > > > > > |
> > > > > > > | grp_id | int(10) unsigned | NO | MUL | NULL |
> > > > > > > |
> > > > > > > | priority | tinyint(3) unsigned | NO | | NULL |
> > > > > > > |
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > ################ parts of my openser.cfg
> > > > > > > #######################################
> > > > > > > loadmodule "lcr.so"
> > > > > > > modparam("lcr", "db_url",
> > > > > > > "mysql://openser:openserrw@localhost /openser")
> > > > > > > modparam("lcr", "gw_table", "gw")
> > > > > > > modparam("lcr", "gw_name_column", "gw_name")
> > > > > > > modparam("lcr", "ip_addr_column", "ip_addr")
> > > > > > > modparam("lcr", "port_column", "port")
> > > > > > > modparam("lcr", "uri_scheme_column", "uri_scheme")
> > > > > > > modparam("lcr", "transport_column", "transport")
> > > > > > > modparam("lcr", "grp_id_column", "grp_id")
> > > > > > > modparam("lcr", "lcr_table", "lcr")
> > > > > > > modparam("lcr", "strip_column", "strip")
> > > > > > > modparam("lcr", "prefix_column", "prefix")
> > > > > > > modparam("lcr", "from_uri_column", "from_uri")
> > > > > > > modparam("lcr", "priority_column", "priority")
> > > > > > > modparam("lcr", "gw_uri_avp", "1400")
> > > > > > > modparam("lcr", "ruri_user_avp", "1402")
> > > > > > > modparam("lcr", "contact_avp", "1401")
> > > > > > > modparam("lcr", "fr_inv_timer_avp", "s:fr_inv_timer_avp")
> > > > > > > modparam("lcr", "fr_inv_timer", 90)
> > > > > > > modparam("lcr", "fr_inv_timer_next", 30)
> > > > > > > modparam("lcr", "rpid_avp", "s:rpid")
> > > > > > >
> > > > > > >
> > > > >
> > > ########################################################################
> > > > > > > # Request route 'invite-to-external'
> > > > > > >
> > > > >
> > > ########################################################################
> > > > > > > route[15]
> > > > > > > {
> > > > > > > xlog("L_INFO", "Ready to Invite To External - M=$rm RURI=$ru F=$fu
> > > > > T=$tu
> > > > > > > IP=$si ID=$ci\n");
> > > > > > >
> > > > > > > if(isflagset(20))
> > > > > > > {
> > > > > > >
> > > > > > > xlog("L_INFO", "Call to foreign domain - M=$rm RURI=$ru F=$fu
> > > T=$tu
> > > > > IP=$si
> > > > > > > ID=$ci\n");
> > > > > > > route(11);
> > > > > > > exit;
> > > > > > > }
> > > > > > > if(!isflagset(23))
> > > > > > > {
> > > > > > > # don't allow calls relaying from PSTN to PSTN, if not explicitely
> > > > > > > forwarded
> > > > > > > xlog("L_INFO", "Ready to 00 - M=$rm RURI=$ru F=$fu T=$tu IP=$si
> > > > > > > ID=$ci\n");
> > > > > > > if(uri =~ "^sip:00[0-9]+@")
> > > > > > > {
> > > > > > > xlog("L_INFO", "Ready to Load PSTN gateways - M=$rm RURI=$ru
> > > F=$fu
> > > > > T=$tu
> > > > > > > IP=$si ID=$ci\n");
> > > > > > > # only route numeric users to PSTN
> > > > > > > if(!load_gws())
> > > > > > > {
> > > > > > > xlog("L_INFO", "Ready to LoadGW - M=$rm RURI=$ru F=$fu T=$tu
> > > IP=$si
> > > > > > > ID=$ci\n");
> > > > > > > xlog("L_ERR", "Error loading PSTN gateways - M=$rm RURI=$ru
> > > F=$fu
> > > > > T=$tu
> > > > > > > IP=$si ID=$ci\n");
> > > > > > > sl_send_reply("503", "PSTN Termination Currently Unavailable");
> > > > > > > exit;
> > > > > > > }
> > > > > > > if(!next_gw())
> > > > > > > {
> > > > > > >
> > > > > > > xlog("L_INFO", "Ready to NextGW - M=$rm RURI=$ru F=$fu T=$tu
> > > IP=$si
> > > > > > > ID=$ci\n");
> > > > > > > xlog("L_ERR", "No PSTN gateways available - M=$rm RURI=$ru F=$fu
> > > > > T=$tu
> > > > > > > IP=$si ID=$ci\n");
> > > > > > > sl_send_reply("503", "PSTN Termination Currently Unavailable");
> > > > > > > exit;
> > > > > > > }
> > > > > > > setflag(21);
> > > > > > >
> > > > > > > t_on_failure("1");
> > > > > > > route(11);
> > > > > > > }
> > > > > > > }
> > > > > > >
> > > > > > > xlog("L_INFO", "Call to unknown user - M=$rm RURI=$ru F=$fu T=$tu
> > > > > IP=$si
> > > > > > > ID=$ci\n");
> > > > > > > route(7);
> > > > > > > sl_send_reply("404", "User Not Found");
> > > > > > > exit;
> > > > > > >
> > > > > > > }
> > > > > > >
> > > > > > >
> > > > > > > --
> > > > > > >
> > > > > > > Best Regards
> > > > > > > Charles
> > > > > > > _______________________________________________
> > > > > > > Users mailing list
> > > > > > > Users at openser.org
> > > > > > > http://openser.org/cgi-bin/mailman/listinfo/users
> > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > >
> > > > > Best Regards
> > > > > Charles
> > > >
> > >
> > >
> > >
> > > --
> > >
> > > Best Regards
> > > Charles
> >
>
>
> _______________________________________________
> Users mailing list
> Users at openser.org
> http://openser.org/cgi-bin/mailman/listinfo/users
>
>
>
More information about the Users
mailing list