Fwd: [Users] SNMPstats module not returning data

Sergio Gutierrez saguti at gmail.com
Thu Mar 29 17:59:26 CEST 2007


Hi Jeffrey,

This is the log of the agent when is started in debug mode, and later
Openser is started:

 /opt/net-snmp/sbin/snmpd -f -Dagentx -x tcp:localhost:705 2>&1
No log handling enabled - turning on stderr logging
registered debug token agentx, 1
agentx_register_app_config_handler: registering .conf token for
"agentxsocket"
agentx_register_app_config_handler: registering .conf token for
"agentxperms"
agentx_register_app_config_handler: registering .conf token for
"agentxRetries"
agentx_register_app_config_handler: registering .conf token for
"agentxTimeout"
Turning on AgentX master support.
agentx/master: initializing...
agentx/master: initializing...   DONE
NET-SNMP version 5.4
agentx/master: unexpected callback op 4
agentx/master: handle pdu (req=0x54fb3d2b,trans=0x0,sess=0x0)
agentx/master: open 0018efc0
agentx/master: opened 001ad130 = 5 with flags = a0
agentx/master: send response, stat 0 (req=0x54fb3d2b,trans=0x0,sess=0x0)
agentx_build: packet built okay

I have tried changing too the keywork agentXsocket to agentXSocket, and with
a minimal snmpd config, and still reports error:

# /opt/net-snmp/bin/snmpwalk -v 2c -c public localhost  .1.3.6.1.4.1.27483
OPENSER-REG-MIB::openser = No Such Object available on this agent at this
OID

And the snmpd log:

agentx/master: send response, stat 0 (req=0x54fb3d2f,trans=0x0,sess=0x0)
agentx_build: packet built okay
agentx/master: handle pdu (req=0x54fb3d30,trans=0x0,sess=0x5)
agentx/master: send response, stat 0 (req=0x54fb3d30,trans=0x0,sess=0x5)
agentx_build: packet built okay

Thanks!


On 3/29/07, Jeffrey Magder <jmagder at somanetworks.com> wrote:
>
> It looks like there is communication going on between the NetSNMP master
> agent, and OpenSER's SNMPStats sub-agent.  Would you be able to provide
> me some more of the /var/log/snmpd.log snmpd logs?  Specifically, I'm
> looking for what happens after:
>
> Turning on AgentX master support.
> agentx/master: initializing...
> agentx/master: initializing...   DONE
> NET-SNMP version 5.3.1
>
> There should be something similar to the following:
>
> agentx/master: unexpected callback op 4
> agentx/master: handle pdu (req=0x1da53a0c,trans=0x0,sess=0x0)
> agentx/master: open 0x81137c8
> agentx/master: opened 0x814b558 = 6 with flags = a0
> agentx/master: send response, stat 0 (req=0x1da53a0c,trans=0x0,sess=0x0)
>
> If thats there, I'm wondering if you have set up any special view
> restrictions for certain parts of the OID Tree given a certain community
> strings?
> Perhaps it would be helpful to rule that out with a minimal snmpd.conf
> file containing only:
>
> rocommunity  public
> master agentx
>
> Finally, I don't think this matters (it doesn't matter on my system),
> but could you change:
>
> agentXsocket tcp:localhost:705  ---> agentXSocket tcp:localhost:705
>
> The "S" wasn't capitalized.  :-)
>
> Thanks again!
>
> - Jeffrey Magder
>
> Sergio Gutierrez wrote:
> > Hi Jefrey
> >
> > Thanks for your answer.
> >
> > I will reply every point:
> >
> > # /opt/net-snmp/bin/snmpwalk -v 2c -c community localhost
> > .1.3.6.1.4.1.27483
> > OPENSER-REG-MIB::openser = No Such Object available on this agent at
> > this OID
> >
> > # ps -ef | grep snmpd
> >     root  1649   579   0 17:50:07 pts/2       0:17
> > /opt/net-snmp/sbin/snmpd -d -f -Dagentx -x tcp:localhost:705
> >     root  2935  2778   0 09:59:21 pts/3       0:00 grep snmpd
> > (I am running debug mode; the syntax of ps command is a little bti
> > different because I am using Solaris)
> >
> > # grep -i agentx /var/log/snmpd.log
> > agentx_build: packet built okay
> > agentx/master: handle pdu (req=0x3ac55fdb,trans=0x0,sess=0xf)
> > agentx/master: send response, stat 0 (req=0x3ac55fdb,trans=0x0,sess=0xf)
> > agentx_build: packet built okay
> > agentx/master: handle pdu (req=0x3ac55fdc,trans=0x0,sess=0xf)
> > agentx/master: send response, stat 0 (req=0x3ac55fdc,trans=0x0,sess=0xf)
> > agentx_build: packet built okay
> > agentx/master: handle pdu (req=0x3ac55fdd,trans=0x0,sess=0xf)
> > agentx/master: send response, stat 0 (req=0x3ac55fdd,trans=0x0,sess=0xf)
> > agentx_build: packet built okay
> > ...
> >
> > # cat /opt/net-snmp/share/snmp/snmpstats.conf
> > agentXsocket tcp:localhost:705
> >
> > # cat /opt/net-snmp/share/snmp/snmpd.conf
> > syslocation  XXXX
> > syscontact  XXXX
> > agentaddress udp:161
> > rocommunity  community localhost
> > master agentx
> >
> > As you can see, both of the files are located at the same directory.
> >
> > Finally, I do have tried the check. I can see Openser starts OK and
> > the master agent receives the connection of the sub agent.
> >
> > Thank you very much for your help.
> >
> > Kind regards.
> >
> > Sergio G.
> >
> >
> >
> >
> >
> > On 3/29/07, *jmagder* <jmagder at somanetworks.com
> > <mailto:jmagder at somanetworks.com>> wrote:
> >
> >     Hi Sergio,
> >
> >     First off, could you try running "/opt/net-snmp/bin/snmpwalk -v 2c
> -c
> >     community sipserver  .1.3.6.1.4.1.27483"?  If that isn't succeeding,
> >     then it would greatly help me debug your problem if you could
> >     answer the
> >     following questions:
> >
> >     1) What is the output of "ps aux | grep snmpd"?
> >
> >     2) What is the output of "cat /var/log/messages | grep AgentX"
> >
> >     3) Can you show me the contents of snmpstats.conf ?
> >
> >     4) Does snmpd.conf contain "master agentx"?
> >
> >     5) Is snmpd.conf located in the same directory as snmpstats.conf?
> >
> >     6) Have you tried the steps in "Testing for a proper
> >     Configuration" in
> >     section 1.6.4?
> >
> >     Thanks Sergio!
> >
> >     - Jeffrey Magder
> >
> >     Sergio Gutierrez wrote:
> >     > Hi list.
> >     >
> >     > I have installed Openser 1.2.0, with Net-snmp version 5.4 to
> support
> >     > the SNMPstats module. I have configured the subagent according to
> >     the
> >     > instructions on the documentation, but I am not being able to
> obtain
> >     > any data.
> >     >
> >     > I am running both products on Solaris 10 Sparc.
> >     >
> >     > # /opt/net-snmp/bin/snmpwalk -v 2c -c community sipserver
> >     > .1.3.6.1.4.1.27483.3.1.1.1.1.1.1
> >     > SNMPv2-SMI::enterprises.27483.3.1.1.1.1.1 = No Such Object
> available
> >     > on this agent at this OID
> >     >
> >     > # /opt/net-snmp/bin/snmpwalk -v 2c -c community sipserver
> >     > openserSIPProtocolVersion
> >     > SNMPv2-SMI::enterprises.27483.3.1.1.1.1.1 = No Such Object
> available
> >     > on this agent at this OID
> >     >
> >     > Is there any other thing I should do after compiling and
> >     configuring?
> >     >
> >     > Thanks in advance for your attention
> >     >
> >     > Kind Regards.
> >     >
> >     > Sergio Gutiérrez
> >     >
> >     >
> >     >
> >     >
> ------------------------------------------------------------------------
> >
> >     >
> >     > _______________________________________________
> >     > Users mailing list
> >     > Users at openser.org <mailto:Users at openser.org>
> >     > http://openser.org/cgi-bin/mailman/listinfo/users
> >     >
> >
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kamailio.org/pipermail/users/attachments/20070329/81401c71/attachment.htm 


More information about the Users mailing list