[Users] Re: memory issues

Papadopoulos Georgios geop at altectelecoms.gr
Tue Mar 27 10:24:16 CEST 2007


Hi Daniel,
 
Does this problem affect 1.1.1 or only 1.2? Is there a patch to use for 1.1.1?
 
thank you
 
George
 
 
--------------------------------------------------------------------------------
 
Hello Ovidiu,

On 03/23/07 17:04, Ovidiu Sas wrote:
> Hi Daniel,
>
> Can we backport this one to 1.2?
already done, two minutes after the commit in trunk.

Cheers,
Daniel

>
>
> Regards,
> Ovidiu Sas
>
> On 3/22/07, Daniel-Constantin Mierla <daniel at voice-system.ro <http://openser.org/cgi-bin/mailman/listinfo/users> > wrote:
>> Hello,
>>
>> the supposed fragmentation turned out to be a mem leak in pkg. Please
>> take the latest SVN version and try again to see if you got same 
>> results.
>>
>> Thanks,
>> Daniel
>>
>> On 03/19/07 18:52, Christian Schlatter wrote:
>> > ...
>> >>> The memory statistics indeed show a high number of memory fragments:
>> >>>
>> >>> before 'out of memory':
>> >>>
>> >>> shmem:total_size = 536870912
>> >>> shmem:used_size = 59607040
>> >>> shmem:real_used_size = 60106488
>> >>> shmem:max_used_size = 68261536
>> >>> shmem:free_size = 476764424
>> >>> shmem:fragments = 9897
>> >>>
>> >>> after 'out of memory' (about 8000 calls per process):
>> >>>
>> >>> shmem:total_size = 536870912
>> >>> shmem:used_size = 4171160
>> >>> shmem:real_used_size = 4670744
>> >>> shmem:max_used_size = 68261536
>> >>> shmem:free_size = 532200168
>> >>> shmem:fragments = 57902
>> >>>
>> >>>>
>> >>>> You can try to compile openser with -DQM_JOIN_FREE (add it in DEFS
>> >>>> variable of Makefile.defs) and test again. Free fragments should be
>> >>>> merged and fragmentation should not occur -- processing will be
>> >>>> slower. We will try for next release to provide a better solution
>> >>>> for that.
>> >>>
>> >>> Compiling openser with -DQM_JOIN_FREE did not help. I'm not sure how
>> >>> big of a problem this fragmentation issue is.
>> >> What is the number of fragments with QM_JOIN_FREE after flooding?
>> >
>> > The numbers included above are with QM_JOIN_FREE enabled.
>> >
>> >>> Do you think it would make sense to restart our production openser
>> >>> instances from time to time just to make sure they're not running
>> >>> into this memory fragmentation limits?
>> >> The issue will occur only when the call rate reaches the limits of
>> >> the proxy's memory. Otherwise the chunks are reused. Transactions and
>> >> avps are rounded up to be sure there will be minimized the number of
>> >> different sizes for memory chunks. It wasn't reported too often,
>> >> maybe that's why no big attention was paid to it. This memory system
>> >> is in place since the beginning of ser. Alternative is to use sysv
>> >> shared memory, but is much slower, along with libc private memory
>> >> manager.
>> >
>> > I've done some more testing and the same out-of-memory stuff happens
>> > when I run sipp with 10 calls per second only. I tested with
>> > 'children=1' and I only could get through about 8200 calls (again
>> > those 8000 calls / process). And this is with QM_JOIN_FREE enabled.
>> >
>> > Memory statistics:
>> >
>> > before:
>> > shmem:total_size = 536870912
>> > shmem:used_size = 2311976
>> > shmem:real_used_size = 2335720
>> > shmem:max_used_size = 2465816
>> > shmem:free_size = 534535192
>> > shmem:fragments = 183
>> >
>> > after:
>> > shmem:total_size = 536870912
>> > shmem:used_size = 1853472
>> > shmem:real_used_size = 1877224
>> > shmem:max_used_size = 2465816
>> > shmem:free_size = 534993688
>> > shmem:fragments = 547
>> >
>> > So I'm not sure if this is really a fragmentation issue. 10 cps surely
>> > doesn't reach the proxy's memory.
>> >
>> > Thoughts?
>> >
>> > Christian
>> >
>> >
>> >
>> >> Cheers,
>> >> Daniel
>> >>
>> >>>
>> >>> thanks,
>> >>> Christian
>> >>>
>> >>>>
>> >>>> Cheers,
>> >>>> Daniel
>> >>>>
>> >>>> On 03/18/07 01:21, Christian Schlatter wrote:
>> >>>>> Christian Schlatter wrote:
>> >>>>> ...
>> >>>>>>
>> >>>>>> I always had 768MB shared memory configured though, so I still
>> >>>>>> can't explain the memory allocation errors I got. Some more test
>> >>>>>> runs revealed that I only get these errors when using a more
>> >>>>>> production oriented config that loads more modules than the one
>> >>>>>> posted in my earlier email. I now try to figure out what exactly
>> >>>>>> causes these memory allocation errors that happen reproducibly
>> >>>>>> after about 220s at 400 cps.
>> >>>>>
>> >>>>> I think I found the cause for the memory allocation errors. As
>> >>>>> soon as I include an AVP write operation in the routing script, I
>> >>>>> get 'out of memory' messages after a certain number of calls
>> >>>>> generated with sipp.
>> >>>>>
>> >>>>> The routing script to reproduce this behavior looks like (full
>> >>>>> config available at
>> >>>>> http://www.unc.edu/~cschlatt/openser/openser.cfg <http://www.unc.edu/~cschlatt/openser/openser.cfg> ):
>> >>>>>
>> >>>>> route{
>> >>>>>         $avp(s:ct) = $ct; # commenting this line solves
>> >>>>>               # the memory problem
>> >>>>>
>> >>>>>         if (!method=="REGISTER") record_route();
>> >>>>>         if (loose_route()) route(1);
>> >>>>>
>> >>>>>         if (uri==myself) rewritehost("xx.xx.xx.xx");
>> >>>>>         route(1);
>> >>>>> }
>> >>>>>
>> >>>>> route[1] {
>> >>>>>         if (!t_relay()) sl_reply_error();
>> >>>>>         exit;
>> >>>>> }
>> >>>>>
>> >>>>> An example log file showing the 'out of memory' messages is
>> >>>>> available at http://www.unc.edu/~cschlatt/openser/openser.log <http://www.unc.edu/~cschlatt/openser/openser.log>  .
>> >>>>>
>> >>>>> Some observations:
>> >>>>>
>> >>>>> - The 'out of memory' messages always appear after about 8000 test
>> >>>>> calls per worker process. One call consists of two SIP
>> >>>>> transactions and six end-to-end SIP messages. An openser with 8
>> >>>>> children handles about 64'000 calls, whereas 4 children only
>> >>>>> handle about 32'000 calls. The sipp call rate doesn't matter, only
>> >>>>> number of calls.
>> >>>>>
>> >>>>> - The 8000 calls per worker process are independent from the
>> >>>>> amount of shared memory available. Running openser with -m 128 or
>> >>>>> -m 768 does not make a difference.
>> >>>>>
>> >>>>> - The more AVP writes are done in the script, the less calls go
>> >>>>> through. It looks like each AVP write is leaking memory (unnoticed
>> >>>>> by the memory statistics).
>> >>>>>
>> >>>>> - The fifo memory statistics do not reflect the 'out of memory'
>> >>>>> syslog messages. Even if openser does not route a single SIP
>> >>>>> message because of memory issues, the statistics still show a lot
>> >>>>> of 'free' memory.
>> >>>>>
>> >>>>>
>> >>>>> All tests were done with openser SVN 1.2 branch on Ubuntu dapper
>> >>>>> x86. I think the same is true for 1.1 version but I haven't tested
>> >>>>> that yet.
>> >>>>>
>> >>>>>
>> >>>>> Christian
>> >>>>>
>> >>>
>> >>>
>> >
>> >
>> > _______________________________________________
>> > Users mailing list
>> > Users at openser.org <http://openser.org/cgi-bin/mailman/listinfo/users> 
>> > http://openser.org/cgi-bin/mailman/listinfo/users <http://openser.org/cgi-bin/mailman/listinfo/users> 
>> >
>>
>> _______________________________________________
>> Users mailing list
>> Users at openser.org <http://openser.org/cgi-bin/mailman/listinfo/users> 
>> http://openser.org/cgi-bin/mailman/listinfo/users <http://openser.org/cgi-bin/mailman/listinfo/users> 
>>
>

 
Γιώργος Παπαδόπουλος
Altec Telecoms
R&D Department
 
Πάτμου 14, 151 23 Μαρούσι
τηλ.: +30 211 687 2933
fax.: +30 211 687 2911
e-mail: geop at altectelecoms.gr
 

Disclaimer
The information in this e-mail and any attachments is confidential. It is intended solely for the attention and use of the named addressee(s). If you are not the intended recipient, or person responsible for delivering this information to the intended recipient, please notify the sender immediately. Unless you are the intended recipient or his/her representative you are not authorized to, and must not, read, copy, distribute, use or retain this message or any part of it. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kamailio.org/pipermail/users/attachments/20070327/a737d1d7/attachment.htm 


More information about the Users mailing list