[Users] Compiling Openser for best performance on Solaris SPARC
Sergio Gutierrez
saguti at gmail.com
Wed Mar 21 21:04:16 CET 2007
Hi.
I will do it Daniel. Thanks for the information.
About the tests, I am currently using 8 sipp instances (4 in each machine)
and I am pretty closer to the performance you gained.
I will try Openser 64 bit.
Thanks again.
Kind regards.
Sergio G.
On 3/21/07, Daniel-Constantin Mierla <daniel at voice-system.ro> wrote:
>
> Hello,
>
> On 03/21/07 21:44, Sergio Gutierrez wrote:
> > Hi Daniel.
> >
> > Some time ago, I tried to compile Openser for 64 bits, but I had
> > problems with libradiusclient, when It was compiled for 64 bits.
> >
> > Is that problem solved? Could I run Openser + MySQL + Radius support
> > compiled as 64 bit?
> haven't tried myself, but as I could see, there were several fixes for
> libradiusclient on 64b. You should give another try.
>
> Cheers,
> Daniel
>
> >
> > Kind regards.
> >
> > Sergio G.
> >
> > On 3/21/07, *Daniel-Constantin Mierla* <daniel at voice-system.ro
> > <mailto: daniel at voice-system.ro>> wrote:
> >
> > Hello,
> >
> > On 03/21/07 20:14, Sergio Gutierrez wrote:
> > > Hi Daniel.
> > >
> > > I am repeating the test using 6 instances of SIPp, and I am having
> a
> > > better performance.
> > >
> > > A question. In the page you have listed that the Proxy and UAS
> > runs on
> > > a 64 bit machine. Was the compilation done to generate a 64 bit
> > > executable?
> > yes, it was 64bit executable. OS is Debian amd64.
> >
> > Cheers,
> > Daniel
> >
> > >
> > > Thanks.
> > >
> > > Kind regards.
> > >
> > > Sergio Gutierrez
> > >
> > > On 3/21/07, *Sergio Gutierrez* <saguti at gmail.com
> > <mailto: saguti at gmail.com>
> > > <mailto:saguti at gmail.com <mailto:saguti at gmail.com>>> wrote:
> > >
> > > Hi Daniel.
> > >
> > > Thanks for your answer.
> > >
> > > My configs are as the same used in published tests, and my
> > UAS, as
> > > described is another instance of Openser.
> > >
> > > I will try what you sugest.
> > >
> > > Thanks.
> > >
> > > Sergio Gutiérrez.
> > >
> > >
> > > On 3/21/07, *Daniel-Constantin Mierla* <
> > daniel at voice-system.ro <mailto:daniel at voice-system.ro>
> > > <mailto: daniel at voice-system.ro
> > <mailto:daniel at voice-system.ro>>> wrote:
> > >
> > > Hello,
> > >
> > > do you use same configs as in published tests? The UAS
> > is another
> > > openser with just sending a 200 ok reply or sipp with uas
> > > scenario?
> > >
> > > First check what is the capacity of sipp -- make a very
> > simple
> > > config
> > > with just sl_send_reply("200","ok") in main route and
> start
> > > sipp. See
> > > what results you get and that should be the reference
> > for sipp
> > > capacity.
> > > Also, try to use multiple instances of sipp, from
> different
> > > servers, see
> > > if you get the cumulative value better.
> > >
> > > The tests were done on Core2 processor, and parallel
> > execution of
> > > openser processes has some impact as well.
> > >
> > > Cheers,
> > > Daniel
> > >
> > >
> > > On 03/21/07 16:52, Sergio Gutierrez wrote:
> > > > Hi.
> > > >
> > > > Currently I am installing Openser 1.2.0 on a Sun Fire
> > T2000
> > > running
> > > > Solaris 10.
> > > > Although I used an optimized version of GCC for SPARC
> > > Systems, and
> > > > used the recommended settings to generate accurate
> > code for my
> > > > Processor (UltraSPARC T1), the results of the
> performance
> > > tests are
> > > > just 50% of the presented ones on the web page.
> > > >
> > > > My setup is the following:
> > > >
> > > > Proxy and UAS: Sun Fire T2000, 8 GB RAM, 1 UltraSPARC
> > T1 1.2
> > > GHZ 6 Core.
> > > > UAC's: Two domain of a Sun Fire 12K, 4 GB RAM, 4
> UlraSPARC
> > > III+ 900 Mhz
> > > > Software versions listed as on the webpage.
> > > >
> > > > openser -V output:
> > > > version: openser 1.2.0-notls (sparc/solaris)
> > > > flags: STATS: Off, USE_IPV6, USE_TCP, DISABLE_NAGLE,
> > USE_MCAST,
> > > > SHM_MEM, SHM_MMAP, PKG_MALLOC, F_MALLOC,
> > > FAST_LOCK-ADAPTIVE_WAIT-NOSMP
> > > > ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144,
> > > MAX_LISTEN 16,
> > > > MAX_URI_SIZE 1024, BUF_SIZE 65535
> > > > poll method support: poll, select, /dev/poll.
> > > > svnrevision: unknown
> > > > @(#) $Id: main.c 1827 2007-03-12 15:22:53Z bogdan_iancu
> $
> > > > main.c compiled on 21:43:51 Mar 19 2007 with gcc 4.0.3
> > > >
> > > >
> > > > I would thank any idea about how could I improve the
> > > performnace of my
> > > > setup. I think that because of the hardware
> > specifications,
> > > the result
> > > > should be at least equal than listed.
> > > >
> > > > Thanks in advance.
> > > >
> > > > Kind regards.
> > > >
> > > > Sergio Gutiérrez.
> > > >
> > > >
> >
> ------------------------------------------------------------------------
> > > >
> > > > _______________________________________________
> > > > Users mailing list
> > > > Users at openser.org <mailto:Users at openser.org>
> > <mailto:Users at openser.org <mailto: Users at openser.org>>
> > > > http://openser.org/cgi-bin/mailman/listinfo/users
> > > >
> > >
> > >
> > >
> >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.kamailio.org/pipermail/users/attachments/20070321/8a426b9a/attachment.htm
More information about the Users
mailing list