[Users] OpenSER and FWD

Michel Bensoussan michel at extricom.com
Wed Mar 21 07:36:10 CET 2007


Hello

After a quick check it seems that not all server an UAs support path 
header and I have to find another solution.
Any idea?

Does anyone has a config file with openser as  proxy and FWD as server?

Thanks and regards,
Michel.


Michel Bensoussan wrote:
> Hi Ovidiu
>
> I missed your previous answer but you are right, this is what I'm 
> looking for. Now I understand why I didn't find in SIP spec.
> I'll try to use Path Module.
> Thank you.
>
> Regards,
> Michel.
>
>
>
> Ovidiu Sas wrote:
>> Hi Michel,
>>
>> As I mentioned to you before, the answer is inside rfc3327.
>> Check if the registrar that you are using has support for it.
>>
>>
>>
>> Regards,
>> Ovidiu Sas
>>
>> On 3/19/07, Michel Bensoussan <michel at extricom.com> wrote:
>>> Hello
>>> I don't want the openser to register itself. The UA can register to any
>>> server. I just want to be sure that ALL SIP messages will path through
>>> the openser. For outgoing call and for incoming call. That's all. But I
>>> don't know how config the openser.
>>> On my SIP phone I defined openser as outbound proxy and as proxy 
>>> server.
>>> For Registrar I defined another server.
>>> For outgoing calls there is no problem. The phone sends INVITE to
>>> openser and openser forwards the message.
>>> The problem is for incoming call. The INVITE message is sent 
>>> directly to
>>> the phone and the openser doesn't know about it.
>>> How can I ensure that all incoming call will pass through openser?
>>> If I define the openser as registrar server, how a remote phone will
>>> found my sip phone?
>>>
>>> I start with the following configuration: there is already a sip server
>>> (anyone) and several sip phones. I just want the openser to be in the
>>> middle. Between the sip phones and the already existing server. And I
>>> want outgoing and incoming call to pass through the openser.
>>> How can I config that?
>>>
>>> Thanks.
>>>
>>> Regards,
>>> Michel.
>>>
>>>
>>> Daniel-Constantin Mierla wrote:
>>> > Hello,
>>> >
>>> > openser cannot register itself to fwd (or other proxy) in behalf of
>>> > users. you can use sipsak/sipp kind of tools to register contacts to
>>> > fwd, and uac module to be able to authenticate for calls.
>>> >
>>> > Cheers,
>>> > Daniel
>>> >
>>> > On 03/18/07 18:08, Michel Bensoussan wrote:
>>> >> Hi Ravi
>>> >>
>>> >> If you can help it will be great because I'm a little bit lost.
>>> >>
>>> >> What I need is to set the OpenSER proxy between a User Agent and FWD
>>> >> (or any other SIP Server/Registrar). I want the UA to register to 
>>> the
>>> >> OpenSER and the OpenSER to register the UA to the FWD. In this case,
>>> >> all SIP message to the UA will pass through the OpenSER.
>>> >> Thank you.
>>> >>
>>> >> Regards,
>>> >> Michel.
>>> >>
>>> >> raviprakash sunkara wrote:
>>> >>> Hi Michel
>>> >>>
>>> >>>
>>> >>> Yes , U can forword the call of outgoing through openSER
>>> >>>
>>> >>> Here, means, U need to forward the call to asterisk 's or pstn 
>>> gateways
>>> >>>
>>> >>> In  openSER when  the call invites to the callee , at  that time u
>>> >>> use the avpops modules ,
>>> >>>
>>> >>>
>>> >>> If  you wants I can do it for U......  a part time i can do for U.
>>> >>>
>>> >>>
>>> >>>
>>> >>>
>>> >>> On 3/18/07, *Michel Bensoussan* < michel at extricom.com
>>> >>> <mailto:michel at extricom.com>> wrote:
>>> >>>
>>> >>>     Hello.
>>> >>>
>>> >>>     How can I configure OpenSER to outgoing all call to FWD and 
>>> more
>>> >>>     important to ensure that all INCOMING call will go through 
>>> OpenSER?
>>> >>>
>>> >>>     Thanks.
>>> >>>
>>> >>>     Regards,
>>> >>>     Michel.
>>> >>>
>>> >>>     _______________________________________________
>>> >>>     Users mailing list
>>> >>>     Users at openser.org <mailto:Users at openser.org>
>>> >>>     http://openser.org/cgi-bin/mailman/listinfo/users
>>> >>>
>>> >>>
>>> >>>
>>> >>>
>>> >>> --
>>> >>> Thanks and Regards
>>> >>> Ravi Prakash Sunkara
>>> >>> ravi.sunkara at hyperion-tech.com 
>>> <mailto:ravi.sunkara at hyperion-tech.com>
>>> >>> M:+91 9985077535
>>> >>> www.hyperion-tech.com <http://www.hyperion-tech.com>
>>> >>> Client and Parent company :- www.august-networks.com
>>> >>> <http://www.august-networks.com>
>>> >> 
>>> ------------------------------------------------------------------------ 
>>>
>>> >>
>>> >> _______________________________________________
>>> >> Users mailing list
>>> >> Users at openser.org
>>> >> http://openser.org/cgi-bin/mailman/listinfo/users
>>> >>
>>> >
>>> >
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users at openser.org
>>> http://openser.org/cgi-bin/mailman/listinfo/users
>>>
>>
>>
>
> _______________________________________________
> Users mailing list
> Users at openser.org
> http://openser.org/cgi-bin/mailman/listinfo/users
>
>




More information about the Users mailing list